360-4.000M-5DNTTS

Oscilent Corporation | 360 Series Crystal Oscillator Page 1 of 3 Crystal Oscillator Series Number Package Description Last Modified 360 FEATURES - HCMOS/TTL Output compatible - Wide frequency range - Low power consumption - 5V or 3.3V optional - RoHs / Lead Free compliant Metal Dip Full Size Programmable XO July 01 2005 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) Fall Time (TF) Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load (One Sigma) 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. ±50 max. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.00 ~ 125.000 5.0 ±10% 1.00 ~ 160.000 UNITS VDC MHz °C °C PPM mA PPM/Y nS nS VDC VDC % ms ps 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 28 max. ±5 max. 4 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) 4 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) 2.4 min. VDD-0.5 min. 45 max. PIN CONNECTIONS #1 #7 No Connection or Tri-State Enable High Case Ground Oscilent Corporation | 360 Series Crystal Oscillator Page 2 of 3 #8 Output #14 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 Connection Gullwing 360 Oscilent Program. Clock Oscillators - 4.000 M Enter desired frequency e.g. 6.0M = 6.00 MHz See table below for standard frequencies -3 5 = 5VDC 3 = 3.3VDC E D = ±100 PPM E = ±50 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = -50±5% TS TS = Tri-State Enable High G Blank* = Std. G = Gullwing NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications. STANDARD OSCILLATOR FREQUENCIES - GUIDE ONLY / OTHER FREQUENCIES AVAILABLE FREQUENCY (1.000 - 9.8304MHz) 1.000 1.2288 1.8432 2.000 2.4576 3.579545 3.6864 4.000 4.9152 5.000 FREQUENCY (10.00 - 24.000MHz) 10.00 11.0592 12.000 12.288 12.800 14.31818 14.7456 15.9744 16.000 16.257 FREQUENCY (24.576 - 80.000MHz) 24.576 25.000 25.175 28.322 30.000 32.000 32.514 33.000 35.000 40.000 Oscilent Corporation | 360 Series Crystal Oscillator Page 3 of 3 5.0688 6.000 6.144 7.3728 8.000 9.216 9.8304 16.384 17.734475 18.000 18.432 19.6608 20.000 24.000 48.000 50.000 64.000 65.000 66.666 80.000 - NOTE: Other frequencies available. PLEASE SPECIFY IN PART NUMBER GUIDE Series No.: 360 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map