430-2.0M-2GC-T

Oscilent Corporation | 430 Series Surface Mount Crystal Oscillators Page 1 of 3 SMD Oscillators Series Number Package Description Last Modified 430 FEATURES - Low power consumption - Standby function - Tape and Reel - Miniature profile - 3.3V or 5.0V optional - RoHs / Lead Free compliant 7 x 5 SMD Ceramic HCMOS / TTL Output Jan. 01 2007 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) / Fall Time (TF) PIN 1 Tri-State Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load 1~ 35 MHz 35 ~ 125.000 MHz (One Sigma) 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 4 max. 10 max. ±10 max. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% * 1.000 ~ 155.520 0 ~ +70 Std. (Ext Temp Avail. See Table Below) -55 ~ +125 ±10, ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±10%) Inclusive of Overall Stability (RL ±5%) 10 ~ 35 max. ±5 max. 8 max. (0.4V to 2.4V w/ TTL, 20% ~ 80% / HCMOS) Option 2.4 min. VDD-0.5 min. 15 ~ 50 max. 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS VDC VDC % mS ps * Low Voltage at 1.8 VDC availabable. Input Current = 2 ~ 10mA PIN CONNECTIONS Oscilent Corporation | 430 Series Surface Mount Crystal Oscillators Page 2 of 3 No Connection or #1 Tri-State Enable High #2 Case Ground #3 Output #4 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 Connection 430 - 2.0M -3 5 = 5 VDC 3 = 3.3 VDC 2 = 2.85 VDC 1 = 1.8 VDC D= E= F= G= J= H= E ±100 PPM ±50 PPM ±25 PPM ±20 PPM ±15 PPM ±10 PPM N Blank* = 0~+70 C = -10~+70 D = -20~+70 L = -20~+75 N = -40~+85 -T Blank*= 50±10% T = -50±5% TS NC = No Connnection TS = Tri-State Enable High Enter your desired Oscilent SMD frequency e.g. 12.0M = Oscillators 12.000MHz See table below for standard frequencies. NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications PART NUMBER CODING - STANDARD OSCILLATOR FREQUENCIES FREQUENCY (1.8432 - 16.000MHz) 1.8432 2.000 2.4576 3.579545 3.6864 4.000 4.9152 5.000 5.0688 6.000 6.144 7.3728 8.000 FREQUENCY (16.257 - 80.00MHz) 16.257 16.384 17.734475 18.000 18.432 19.6608 20.000 24.000 24.576 25.000 25.175 28.322 30.000 Oscilent Corporation | 430 Series Surface Mount Crystal Oscillators Page 3 of 3 9.216 9.8304 10.000 11.0592 12.000 12.288 12.800 14.31818 14.7456 15.9744 16.000 32.000 32.514 33.000 35.000 40.000 48.000 50.000 64.000 65.000 66.666 80.000 NOTE: Other frequencies available. Please consult Oscilent for part numbers Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Series No.: 430 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map