434-12.0M-5ED-TNC

Oscilent Corporation | 434 Series Surface Mount Crystal Oscillator Page 1 of 2 SMD Oscillators Series Number Package Description Last Modified 434 FEATURES - Ultra Low Jitter 1pS - Low power consumption - Tape and Reel - Miniature profile 5 x 3.2 x 1.0 - 3.3V or 5.0V optional - RoHs / Lead Free compliant 5 x 3.2 SMD Ceramic HCMOS / TTL Output Jan. 01 2007 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (Vdd) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Current Consumption Aging Rise Time (TR) / Fall Time (TF) @ 25°C < 23.999 MHz 24.00 ~ 70.00 MHz 70.001 ~ 100.00 MHz PIN 1 Tri-State Input Voltage (Option) Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter TTL Load HCMOS Load TTL Load HCMOS Load (12KHz to 20MHz) CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 0.450 ~ 100.00 0 ~ +70 Std. (Ext Temp Avail. See Table Below) -55 ~ +125 ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (Vdd ±5%) Inclusive of Overall Stability (RL ±5%) 10 ~ 45 (35) max. ±5 max. 10 max. 6 max. 4 max. Vh (Pin 1) No Connection : Enables Output Vh (Vih) > 2.2 Vdc : Enables Output Vl (Vil) < 0.8 Vdc : Disables Output (High Impedance) 2.4 min. Vdd * 0.9 min. 0.4 max. Vdd * 0.1 min. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. RMS: ±1 max. VDC VDC % mS ps nS 15 ~ 85 (50) max. 5.0 ±10% UNITS VDC MHz °C °C ppm mA ppm/Y PIN CONNECTIONS Oscilent Corporation | 434 Series Surface Mount Crystal Oscillator Page 2 of 2 #1 No Connection or Tri-State Enable High #2 Case Ground #3 Output #4 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 Connection 434 - 12.0M Enter your desired -3 5 = 5VDC 3 = 3.3VDC D= E= F= G= E ±100 ppm ±50 ppm ±25 ppm ±20 ppm N Blank* = 0~+70 C = -10~+70 D = -20~+70 N = -40~+85 -T Blank*= 50±10% T = -50±5% TS NC = No Connnection TS = Tri-State Enable High Oscilent SMD frequency e.g. 12.0M = Oscillators 12.000MHz NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Series No.: 434 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map