715-T09A-1

Oscilent Corporation | 715 - 718 Page 1 of 3 Filters Series Number Package Description Last Modified 715 ~ 718 . UM-1 / UM-5; 2 Pole Monolithic Dip Type Jan. 01 2002 Filter FEATURES - Low loss - High stability for wide temperature ranges - Sharp cut offs OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS / PART NUMBER GUIDE GENERAL CHARACTERISTICS Operating Temperature Range: -20 ~ 70°C Mode of Oscillation: 21.40 ~ 30.875 MHz: Fundamental 45.0 MHz: 3rd Overtone Nominal Frequency MHz 21.40 21.40 21.40 21.40 21.40 21.40 21.40 21.40 21.60 21.60 21.60 21.70 21.70 21.70 21.70 21.70 21.70 21.70 21.75 23.05 23.05 30.875 45.00 45.00 45.00 Pass Band Width KHz/dB ±3.75/3 ±4.50/3 ±6.0/3 ±7.50/3 ±7.50/3 ±7.50/3 ±10.0/3 ±15.0/3 ±3.75/3 ±6.0/3 ±7.50/3 ±3.75/3 ±3.75/3 ±4.50/3 ±6.0/3 ±7.50/3 ±10.0/3 ±15.0/3 ±3.75/3 ±3.75/3 ±7.50/3 ±7.50/3 ±3.50/3 ±7.50/3 ±15.0/3 Stop Band Width KHz/dB ±14/18 ±12.5/14 ±20/15 ±25/18 ±30/18 ±30/18 ±25/10 ±45/15 ±14/18 ±20/15 ±25/18 ±14/18 ±15/18 ±12.5/14 ±20/15 ±25/18 ±25/10 ±45/15 ±25/18 ±12.5/16 ±25/18 ±25/15 ±12.5/10 ±25/14 ±50/10 Ripple dB 0.5 0.5 0.5 0.5 0.5 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Insertion Loss dB 1.5 1.5 1.5 1.5 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Terminal Impedance Rt//Ct[ohm/pF] 850//7 850//7 1200//2.5 1500//3 1500//3 1500//2 1800//1.5 3000//0.5 850//5 1200//2.5 1500//3 850//5 850//6 1500//4 1200//2.5 1500//3 1800//1.5 3000//0.5 1500//3 1600//5 1500//3 800//6 510//5.5 550//3 510//5.5 Pole 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 PART NO. (Figure) UM-1 (1) 715-M07A-1 715-M09A-1 715-M12A-1 715-M15A1-1 715-M15A2-1 715-M15A3-1 715-M20A-1 715-M30A-1 715-P07A-1 715-P12A-1 715-P15A-1 715-T07A1-1 715-T07A2-1 715-T09A-1 715-T12A-1 715-T15A-1 715-T20A-1 715-T30A-1 715-S07A-1 716-M07A-1 716-M15A-1 717-M15A-1 718-M07A-1 718-M15A-1 718-M30A-1 UM-5 (2) 715-M07A-5 715-M09A-5 715-M12A-5 715-M15A1-5 715-M15A2-5 715-M15A3-5 715-M20A-5 715-M30A-5 715-P07A-5 715-P12A-5 715-P15A-5 715-T07A1-5 715-T07A2-5 715-T09A-5 715-T12A-5 715-T15A-5 715-T20A-5 715-T30A-5 715-S07A-5 716-M07A-5 716-M15A-5 717-M15A-5 718-M07A-5 718-M15A-5 718-M30A-5 NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above, for definitions of the particular characteristic. Oscilent Corporation | 715 - 718 Page 2 of 3 . Series No.: 715 to 718 Oscilent Corporation | 715 - 718 Page 3 of 3 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map