802-RF462.5M-B

Oscilent Corporation RF SAW Filter | 802-RF462.5M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF462.5M-B . TYPE : 3.0 x 3.0 SMD CDMA450(C-Band) Mar.. 10, 2007 CDMA450(C-Band), RF-Tx SAW Filter PART NUMBER : 802-RF462.5M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 460.0~ 464.8 MHz 0.3~ 450.0 MHz 450.0~ 454.8 MHz 485.0~ 505.0MHz 505.0~ 1200.0 MHz 1200.0~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (single ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 460.0~ 464.8 MHz Minimum 40 35 40 30 20 -30 Typical 462.5 3.0 48 45 53 37 32 50 50 2.0 Maximum 4.8 2.4 27 +80 MHz ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F Ground Out Ground Ground In Ground TEST FIXTURE Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE Oscilent Corporation RF SAW Filter | 802-RF462.5M-B Page 2 of 2 VSWR SMITH CHART Part No.: 802-RF462.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map