803-RF452.5M-A

RF SAW Filter Part Number Package Application Last Modified 803-RF452.5M-A . TYPE : 3.8 x 3.8 SMD CDMA450 Tx Jan. 01, 2007 CDMA450, RF-Tx SAW Filter PART NUMBER : 803-RF452.5M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 450.0 ~ 454.8 MHz 0.3 ~ 440.0 MHz 460.0 ~ 465.0 MHz 465.0 ~ 1700.0MHz 1700.0~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (single ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 450.0 ~ 454.8 MHz Minimum 25 30 25 20 -30 Typical 452.5 1.8 28 49 28 23 50 50 1.4 Maximum 2.8 2.0 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F Ground In Ground Ground Out Ground TEST FIXTURE Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 803-RF452.5M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map