803-RF462.5M-B

Oscilent Corporation RF SAW Filter | 803-RF462.5M-B Page 1 of 3 RF SAW Filter Part Number Package Application Last Modified 803-RF462.5M-B . TYPE : 3.8 x 3.8 SMD CDMA450 Jan. 01, 2007 CDMA450, RF-Rx SAW Filter PART NUMBER : 803-RF462.5M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 460.0~ 464.8 MHz 0.3~ 450.0 MHz 450.0~ 455.0 MHz 485.0~ 505.0MHz 505.0~ 1200.0 MHz 1200.0~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (single ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 460.0~ 464.8 MHz Minimum 40 35 40 30 20 -30 Typical 462.5 2.8 45 46 50 41 32 50 50 1.9 Maximum 4.8 2.4 27 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F Ground In Ground Ground Out Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 803-RF462.5M-B Page 2 of 3 Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Oscilent Corporation RF SAW Filter | 803-RF462.5M-B Page 3 of 3 Part No.: 803-RF462.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map