811-IF85.38M-A

Oscilent Corporation IF SAW Filter | 811-IF85.38M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 811-IF85.38M-A . TYPE : 11.6 x 5.0 SMD Mobile Communication June 17 2003 85.38 MHz Bandpass Filter 1.26 MHz Bandwidth PART NUMBER : 811-IF85.38M-A . Horizontal : 0.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.2 MHz/Div Veritical : 1 dB/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 5dB Bandwidth 33dB Bandwidth Attenuation at Fo ± 0.9 MHz Attenuation at Fo ± 1.25 MHz Attenuation at Fo ± 1.7 MHz Passband Ripple Ultimate Rejection Substrate Material Ambient Temperature Minimum 85.36 1.26 33 33 33 35 Typical 85.38 10.95 1.31 1.76 38 47 43 0.3 42 Quartz 25 Maximum 85.40 12.5 1.80 0.7 Units MHz dB MHz MHz dB dB dB dB dB °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_811_if85_38a.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 811-IF85.38M-A Page 2 of 2 L1 = 394.7nH C1 = 75pF L2 = 470nH C2 = 62pF Source/Load Impedance = 50 ohms Part No.: 811-IF85.38M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_811_if85_38a.htm 12/28/2005