813-IF140.0M-G

Oscilent Corporation IF SAW Filter | 813-IF140.0M-G Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 813-IF140.0M-G . TYPE : 13.3 x 6.5 SMD Base Station & Repeater May 30 2003 140.0 MHz Bandpass Filter 9.6 MHz Bandwidth PART NUMBER : 813-IF140.0M-G .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Passband Ripple (Fo ±4.0MHz) Group Delay Variation (Fo ±4.0MHz) Ultimate Rejection Temperature Coefficient Minimum 8.8 9.6 40 Typical 140.0 21.5 9.0 9.8 12.0 0.85 70 42 -18 Maximum 23.0 12.5 1.2 150 Units MHz dB MHz MHz MHz dB nsec dB ppm/K * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE L1 = L2 = 33nH 47nH C1 = 43pF C2 = 33pF Source/Load Impedance = 50 ohms Part No.: 813-IF140.0M-G Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if140_0g.htm 12/28/2005