Oscilent Corporation IF SAW Filter | 835-IF70.0M-P
Page 1 of 2
IF SAW Filter Part Number Package Application Last Modified
835-IF70.0M-P
. TYPE :
35.0 x 12.8 Thru Hole
Base Station & Repeater
May 02 2003
70.0 MHz Bandpass Filter 250 KHz Bandwidth
PART NUMBER :
835-IF70.0M-P
.
Horizontal : 0.3 MHz/Div Veritical : 10 dB/Div
Horizontal : 0.06 MHz/Div Veritical : 1 dB/Div Veritical : 200 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Passband Ripple Group Delay Variation Absolute Delay Ultimate Rejection Substrate Material Ambient Temperature Minimum 69.94 0.16 0.25 50 Typical 70.00 17.5 0.18 0.30 0.9 1.2 300 3.7 60 Qz 25 Maximum 70.06 20.0 1.0 1.5 1000 Units MHz dB MHz MHz MHz dB µsec µsec dB °C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE
(mm)
TEST FIXTURE
http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if70_0p.htm
12/28/2005
Oscilent Corporation IF SAW Filter | 835-IF70.0M-P
Page 2 of 2
L1 = L2 =
120nH 100nH
C1 = 62pF C2 = 27pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF70.0M-P
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map
http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if70_0p.htm
12/28/2005
很抱歉,暂时无法提供与“835-IF70.0M-P”相匹配的价格&库存,您可以联系我们找货
免费人工找货