835-IF70.0M-SA

Oscilent Corporation IF SAW Filter | 835-IF70.0M-SA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF70.0M-SA . TYPE : 35 x 12.8 Thru Hole 70.0MHz Bandpass Filter Jan. 01, 2007 70.0 MHz Bandpass Filter 1.26 MHz Bandwidth PART NUMBER : 835-IF70.0M-SA . FREQUENCY CHARACTERISTICS Horizontal : 0.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.2 MHz/Div Veritical : 1.0 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1 dB Bandwidth 40 dB Bandwidth Attenuation at Fo+/-0.9MHz Attenuation at Fo+/-1.25MHz Attenuation at Fo+/-1.7MHz Passband Ripple @ Fo+/-0.55MHz Phase Linearity Absolute Delay Ultimate Rejection Substrate Material Ambient Temperature Minimum 69.97 1.26 1.8 40 40 40 40 Typical 70.0 20.0 1.29 1.78 43 45 45 0.7 4.2 3.45 50 Qz 25 Maximum 70.03 22.0 1.0 5.0 Units MHz dB MHz MHz dB dB dB dB rms µsec dB C * Custom SAW IF Filters available. Contact Oscilent for assistance. . Oscilent Corporation IF SAW Filter | 835-IF70.0M-SA Page 2 of 2 PACKAGE OUTLINE (mm) TEST FIXTURE L1=220 nH C1=51 pF L2=220 nH C2=56 pF Source Impedance = 50 ohms Load Impedance = 50 ohms Part No.: 835-IF70.0M-SA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map