RU6080L

RU6080L N-Channel Advanced Power MOSFET MOSFET Features Pin Description • 60V/80A, RDS (ON) =7mΩ(Typ.)@VGS=10V • Super High Dense Cell Design • 100% avalanche tested • Lead Free and Green Devices Available (RoHS Compliant) TO-252 Applications • SMPS • High Speed Power Switching N-Channel MOSFET Absolute Maximum Ratings Symbol Parameter Rating Unit Common Ratings (TA=25°C Unless Otherwise Noted) VDSS Drain-Source Voltage 60 VGSS Gate-Source Voltage ±25 Maximum Junction Temperature 175 °C -55 to 175 °C TJ TSTG IS Storage Temperature Range Diode Continuous Forward Current ② V TC=25°C 80 A TC=25°C 310 TC=25°C A TC=100°C 80 65 TC=25°C 125 W TC=100°C 63 W 1.2 °C/W 225 mJ Mounted on Large Heat Sink IDP 300μs Pulse Drain Current Tested ID Continuous Drain Current(VGS=10V) PD RθJC Maximum Power Dissipation Thermal Resistance-Junction to Case ① A ② Drain-Source Avalanche Ratings EAS ③ Avalanche Energy, Single Pulsed Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 www.ruichips.com RU6080L Electrical Characteristics Symbol (TA=25°C Unless Otherwise Noted) Parameter Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS VGS(th) IGSS RDS(ON) ④ Zero Gate Voltage Drain Current Test Condition VGS=0V, IDS=250µA RU6080L Min. Typ. 1 TJ=85°C VDS=VGS, IDS=250µA Gate Leakage Current VGS=±25V, VDS=0V Drain-Source On-state Resistance VGS= 10V, IDS=30A 10 2 Unit V 60 VDS= 60V, VGS=0V Gate Threshold Voltage Max. µA 4 V ±100 nA 7 8.5 mΩ 0.8 1.2 V 3 Diode Characteristics VSD ④ Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge ISD=30A, VGS=0V ISD=30A, dlSD/dt=100A/µs 38 ns 45 nC 2.0 Ω ⑤ Dynamic Characteristics RG Gate Resistance VGS=0V,VDS=0V,F=1MHz Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance td(ON) Turn-on Delay Time tr Turn-on Rise Time td(OFF) Turn-off Delay Time tf VGS=0V, VDS= 30V, Frequency=1.0MHz 2840 pF 300 140 14 VDD=30V, RL=30Ω, IDS=30A, VGEN= 10V, RG=4.7Ω Turn-off Fall Time 45 ns 54 32 ⑤ Gate Charge Characteristics Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge Notes: 55 VDS=48V, VGS= 10V, IDS=30A 11 72 nC 13 Pulse width limited by safe operating area. Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 60A. Limited by TJmax, IAS =30A, VDD = 48V, RG = 50Ω , Starting TJ = 25°C. Pulse test ; Pulse width≤300µs, duty cycle≤2%. Guaranteed by design, not subject to production testing. Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 2 www.ruichips.com RU6080L Typical Characteristics Drain Current Ptot - Power (W) ID - Drain Current (A) Power Dissipation Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Thermal Transient Impedance ID - Drain Current (A) Normalized Effective Transient Safe Operation Area VDS - Drain-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 Square Wave Pulse Duration (sec) 3 www.ruichips.com RU6080L Typical Characteristics Drain-Source On Resistance ID - Drain Current (A) RDS(ON) - On Resistance (mΩ) Output Characteristics VDS - Drain-Source Voltage (V) ID - Drain Current (A) Gate Threshold Voltage RDS(ON) - On - Resistance (m) Normalized Threshold Voltage Drain-Source On Resistance VGS - Gate-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 Tj - Junction Temperature (°C) 4 www.ruichips.com RU6080L Typical Characteristics Source-Drain Diode Forward IS - Source Current (A) Normalized On Resistance Drain-Source On Resistance Tj - Junction Temperature (°C) VSD - Source-Drain Voltage (V) Gate Charge C - Capacitance (pF) VGS - Gate-Source Voltage (V) Capacitance VDS - Drain-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 QG - Gate Charge (nC) 5 www.ruichips.com RU6080L Avalanche Test Circuit and Waveforms Switching Time Test Circuit and Waveforms Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 6 www.ruichips.com RU6080L Ordering and Marking Information Device Marking Package Packaging Quantity Reel Size Tape width RU6080L RU6080L TO-252 Tape&Reel 2500 13’’ 16mm Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 7 www.ruichips.com RU6080L Package Information TO252-2L SYMBOL MM INCH MM SYMBOL INCH MIN MAX MIN MAX A 2.200 2.400 0.087 0.094 L A1 0.000 0.127 0.000 0.005 L1 b 0.660 0.860 0.026 0.034 L2 C 0.460 0.580 0.018 0.023 L3 D 6.500 6.700 0.256 0.264 L4 0.600 1.000 0.024 0.039 D1 5.100 5.460 0.201 0.215 Φ 1.100 1.300 0.043 0.051 θ 0° 8° 0° 8° 0.000 0.300 0.000 0.012 D2 4.830 REF. 0.190 REF. E 6.000 6.200 0.236 0.244 h e 2.186 2.386 0.086 0.094 V MIN MAX MIN MAX 9.800 10.400 0.386 0.409 2.900 REF. 1.400 1.700 1.600 REF. 5.350 REF. 0.114 REF. 0.055 0.067 0.063REF. 0.211 REF. ALL DIMENSIONS REFER TO JEDEC STANDARD DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 8 www.ruichips.com RU6080L Customer Service Worldwide Sales and Service: Sales@ruichips.com Technical Support: Technical@ruichips.com Investor Relations Contacts: Investor@ruichips.com Marcom Contact: Marcom@ruichips.com Editorial Contact: Editorial@ruichips.com HR Contact: HR@ruichips.com Legal Contact: Legal@ruichips.com Shen Zhen RUICHIPS Semiconductor CO., LTD Room 501, the 5floor An Tong Industrial Building, NO.207 Mei Hua Road Fu Tian Area Shen Zhen City, CHINA TEL: (86-755) 8311-5334 FAX: (86-755) 8311-4278 E-mail: Sales-SZ@ruichips.com Copyright Ruichips Semiconductor Co., Ltd Rev. B– APR., 2011 9 www.ruichips.com