FKC08-12S12

FEATURES • 8 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 2A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 88% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY (300KHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS SMD TYPE DESCRIPTION The FKC08 series offer 8 watts of output power from a package in an IC compatible 24pin DIP configuration. FKC08 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FKC08 have features 1600VDC of isolation, short circuit protection and as well as five sided shielding. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation Load regulation LL to HL at Full Load No Load Single (DIP) to Full Load Single (SMD) Dual (SMD,DIP) Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS 8 Watts, max. ± 1% 0% ± 0.2% ± 0.5% ± 1% ± 1% ± 5% See table ±0.02% / ºC, max. 200μS 150%, typ. Input filter Input surge voltage 100mS max 12V input 24V input 48V input Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type 36VDC 50VDC 100VDC Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise Temperature coefficient 20MHz bandwidth Transient response recovery time 25% load step change Over load protection Short circuit protection % of FL at nominal input Input reflected ripple Nominal Vin and full load 20mAp-p current Nominal Vin and Start up time Power up 700mS, max. constant resistive load Remote ON/OFF (Note 6) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V DC-DC OFF Input current of remote control pin Nominal Vin -0.5mA ~ 0.5mA Remote off state input current Nominal Vin 2.5mA Continuous, automatics recovery ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Nature convection -40ºC to +85ºC (with derating) +100ºC -55ºC to +105ºC 20ºC/Watt MIL-STD-810F MIL-STD-810F 5% to 95% RH GENERAL SPECIFICATIONS Efficiency Isolation voltage Input to Output Input(Output) to Case DIP SMD See table 1600VDC, min. 1600VDC, min. 1000VDC, min. 10 ohms, min. 300pF, max. 300KHz, typ. IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.053 x 10 hrs 6 MIL-HDBK-217F 1.213 x 10 hrs 9 Isolation resistance Isolation capacitance Switching frequency Approvals and standard Case material Base material Potting material Dimensions Weight MTBF (Note 1) EMC CHARACTERISTICS EMI (Note 7) ESD Radiated immunity EN55022 EN61000-4-2 EN61000-4-3 Air Contact ± 8KV ± 6KV 10 V/m ± 2KV ± 1KV 10 Vr.m.s Class A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Fast transient (Note 8) EN61000-4-4 Surge (Note 8) Conducted immunity EN61000-4-5 EN61000-4-6 Page 1 of 3 Issued Date：2008/05/21 Model Number FKC08-12S33 FKC08-12S05 FKC08-12S12 FKC08-12S15 FKC08-12D05 FKC08-12D12 FKC08-12D15 FKC08-24S33 FKC08-24S05 FKC08-24S12 FKC08-24S15 FKC08-24D05 FKC08-24D12 FKC08-24D15 FKC08-48S33 FKC08-48S05 FKC08-48S12 FKC08-48S15 FKC08-48D05 FKC08-48D12 FKC08-48D15 Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Input Current Eff (4) Output (4) (3) (2) (%) Full load Min. load Full load Ripple & Noise No load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 15mA 13mA 20mA 15mA 20mA 20mA 10mA 30mA 13mA 15mA 15mA 15mA 13mA 7mA 8mA 10mA 10mA 8mA 8mA 7mA 724mA 791mA 792mA 802mA 843mA 802mA 824mA 362mA 396mA 406mA 411mA 427mA 406mA 411mA 181mA 198mA 203mA 203mA 205mA 200mA 201mA 80 83 88 87 83 87 85 80 83 86 85 82 86 85 80 83 86 86 85 87 87 Capacitor(5) Load max 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF Note 1. 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to –Vin. The FKC08 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend: 12Vin: 4.7μF/25V 1210 MLCC . 24Vin : N/A . 48Vin : N/A. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 8. Page 2 of 3 Issued Date：2008/05/21 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 FKC0812xxx FKC0824xxx 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 4.7μF/50V 1812 MLCC 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC FKC0848xxx L1 325μH 1000pF/2KV 1000pF/2KV Common N/A MLCC MLCC Choke PMT-050 325μH 1000pF/2KV 1000pF/2KV Common N/A MLCC MLCC Choke PMT-050 325μH 2.2μF/100V 1000pF/2KV 1000pF/2KV Common 1812 MLCC MLCC MLCC Choke PMT-050 C2 C3 C4 DIP PIN CONNECTION PIN 1 2 3 9 11 SINGLE CTRL - INPUT - INPUT NC NC DUAL CTRL - INPUT - INPUT COMMON - OUTPUT PIN 23 22 16 14 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT - OUTPUT COMMON + OUTPUT + OUTPUT SMD PIN CONNECTION PIN 1 2 3 9 11 Others SINGLE CTRL - INPUT - INPUT NC NC NC DUAL CTRL - INPUT - INPUT PIN 23 22 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT Recommended EN55022 Class B Filter Circuit Layout COMMON 16 - OUTPUT COMMON - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC Page 3 of 3 Issued Date：2008/05/21