MPP06-24S24WA

Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP06 - 48 Series Name Input Voltage (VDC) 05:4.5~9 12:9~18 24:18~36 48:36~75 S Output Voltage (VDC) S:Single 3P3:3.3 05:5 12:12 15:15 24:24 D:Dual 24:9~36 48:18~75 05 W Output Quantity S:Single D:Dual P T Input Range Pin Connection Options A - Remote On/Off Options Trim Options : 2:1 A: A type(Standard) B: B type :No pin P:Remote On/Off (Only for B type Pin connection) :No Trim T:Trim (Only for B type Pin connection) W: 4:1 A: A type(Standard) B: B type :No pin P:Remote On/Off (Only for B type Pin connection) :No Trim T:Trim (Only for B type Pin connection) 05:±5 12:±12 15:±15 3P3:3.3 05:5 12:12 15:15 24:24 05:±5 12:±12 15:±15 P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 1 MPP06 MPP06W Series TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ unless otherwise noted Output Current @Full Load Input Current @ No Load VDC mA mA % μF 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 1800 1200 500 400 250 ±600 ±250 ±200 1800 1200 500 400 250 ±600 ±250 ±200 1800 1200 500 400 250 ±600 ±250 ±200 1800 1200 500 400 250 ±600 ±250 ±200 1800 1200 500 400 250 ±600 ±250 ±200 1800 1200 500 400 250 ±600 ±250 ±200 10 10 15 15 20 25 25 25 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 81.5 86 86 87.5 87 84 86.5 87.5 83.5 86 89 88.5 88.5 85 89 88 83 86 89 89 88.5 85 88.5 88.5 82.5 86.5 88 88.5 88 85 88 87 83 86 89 89 88.5 85 88.5 88.5 82.5 86.5 88 88.5 88 85 88 87 2100 1500 260 210 75 ± 860 ± 150 ± 110 2100 1500 260 210 75 ± 860 ± 150 ± 110 2100 1500 260 210 75 ± 860 ± 150 ± 110 2100 1500 260 210 75 ± 860 ± 150 ± 110 2100 1500 260 210 75 ± 860 ± 150 ± 110 2100 1500 260 210 75 ± 860 ± 150 ± 110 Model Number Input Range Output Voltage VDC MPP06-05S3P3A/B MPP06-05S05A/B MPP06-05S12A/B MPP06-05S15A/B MPP06-05S24A/B MPP06-05D05A/B MPP06-05D12A/B MPP06-05D15A/B MPP06-12S3P3A/B MPP06-12S05A/B MPP06-12S12A/B MPP06-12S15A/B MPP06-12S24A/B MPP06-12D05A/B MPP06-12D12A/B MPP06-12D15A/B MPP06-24S3P3A/B MPP06-24S05A/B MPP06-24S12A/B MPP06-24S15A/B MPP06-24S24A/B MPP06-24D05A/B MPP06-24D12A/B MPP06-24D15A/B MPP06-48S3P3A/B MPP06-48S05A/B MPP06-48S12A/B MPP06-48S15A/B MPP06-48S24A/B MPP06-48D05A/B MPP06-48D12A/B MPP06-48D15A/B MPP06-24S3P3WA/B MPP06-24S05WA/B MPP06-24S12WA/B MPP06-24S15WA/B MPP06-24S24WA/B MPP06-24D05WA/B MPP06-24D12WA/B MPP06-24D15WA/B MPP06-48S3P3WA/B MPP06-48S05WA/B MPP06-48S12WA/B MPP06-48S15WA/B MPP06-48S24WA/B MPP06-48D05WA/B MPP06-48D12WA/B MPP06-48D15WA/B 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 Efficiency Maximum Capacitor Load P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 2 MPP06 MPP06W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 2:1 (W) 4:1 Start up voltage 2:1 (W) 4:1 Shutdown voltage 2:1 (W) 4:1 Start up time Constant resistive load Input surge voltage 3 second, max. 2:1 3 second, max. (W) 4:1 Input filter Remote ON/OFF Referred to –Vin pin DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current (Only for B-type Pin connection option) OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation No Load to Full Load Cross regulation Voltage adjustability Asymmetrical load 25%/100% FL Single output (Only for B-type Pin connection option) Ripple and noise Dual output Measured by 20MHz bandwidth With a 10μF/25V X7R MLCC With a 4.7μF/50V X7R MLCC Temperature coefficient Transient response recovery time Over voltage protection Single Dual Single Dual Dual 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout ±5Vout, ±12Vout, ±15Vout Min. Typ. Max. 4.5 9 18 36 9 18 5 12 24 48 24 48 9 18 36 75 36 75 4.5 9 18 36 9 18 4.4 8.8 17.5 34.5 8.8 17.5 3 7 15 31.5 7 15 -0.5 Min. 4 8 16 33 8 16 30 30 Typ. -1.0 -0.2 -0.5 -0.2 -1.0 -5.0 -10 -10 -10 3.3Vout, 5Vout 12Vout, 15Vout 24Vout % of Iout rated; Hiccup mode VDC VDC VDC VDC VDC Max. Unit +1.0 +0.2 +0.5 +0.2 +1.0 +5.0 +10 +20 +10 % 30 40 50 3.7 5.6 13.5 18.3 29.1 5.6 13.5 17.0 VDC ms % % % % mVp-p +0.02 250 3.3Vout 5Vout 12Vout 15Vout 24Vout 5Vout 12Vout 15Vout Unit 16 25 VDC 50 100 50 VDC 100 Pi type OPEN or 0 ~ 1.2VDC 2.2 ~ 12VDC 1 mA 2.5 mA -0.02 25% load step change Single Dual Over load protection Short circuit protection 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48 Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Series 5 7.0 16 22.0 34.5 7.0 18.2 22.0 %/℃ μs VDC VDC 150 % Continuous, automatics recovery P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 3 MPP06 MPP06W GENERAL SPECIFICATIONS Parameter Isolation voltage Isolation resistance Isolation capacitance Leakage current Switching frequency Clearance/Creepage Safety approvals Case material Base material Potting material Weight MTBF Maximum case temperature Storage temperature range Thermal impedance Operating altitude Thermal shock Vibration Relative humidity Min. 10 225 8 IEC/ EN/ ANSI/ AAMI ES 60601-1 IEC/ EN/ UL 62368-1 MIL-HDBK-217F, Full load Without derating With derating Conditions Typ. Max. 5000 240VAC,60Hz ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Conditions 1 minute Input to Output Reinforced insulation for 250VAC working voltage 500VDC Min. Series Unit VAC GΩ pF μA 250 kHz mm UL:E360199 UL:E193009 CB: UL(Demko) Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 14g (0.48oz) 4.718 x 106 hrs 12 17 2 275 Typ. Max. Unit +88 +105 105 +125 ℃ -40 +88 -55 18 ℃ ℃ ℃/W 5000 m MIL-STD-810F MIL-STD-810F 5% to 95% RH P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 4 MPP06 MPP06W EMC SPECIFICATIONS Parameter EMI EMS ESD Radiated immunity Fast transient Surge Conditions Level EN55011, EN55032, EN60601-1-2 and FCC Part 18 / 15 Without external filter With external filter EN55035 and EN60601-1-2 EN61000-4-2 Air ± 15kV and Contact ± 8kV EN61000-4-3 10 V/m EN61000-4-4 ± 2kV Class A Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A MPP06-05 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 1000μF/25V) and a reverse diode (Vishay V10P45) in parallel. MPP06-12 MPP06-24 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470μF/50V). MPP06-48 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330μF/100V). ± 2kV EN61000-4-5 Series MPP06-05 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 1000μF/25V) and a reverse diode (Vishay V10P45) in parallel. MPP06-12 MPP06-24 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470μF/50V). Perf. Criteria A MPP06-48 With an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330μF/100V). Conducted immunity EN61000-4-6 10 Vr.m.s Power frequency magnetic field EN61000-4-8 100A/m continuous; 1000A/m 1 second CAUTION: This power module is not internally fused. An input line fuse must always be used. Perf. Criteria A Perf. Criteria A CHARACTERISTIC CURVE MPP06-48S05WA Derating Curve MPP06-48S05WA Efficiency vs. Input Voltage MPP06-48S05WA Efficiency vs. Output Load P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 5 MPP06 MPP06W Series FUSE CONSIDERATION This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The input line fuse suggest as below： Model MPP06-05S□□、MPP06-05D□□ MPP06-12S□□、MPP06-12D□□ MPP06-24S□□、MPP06-24D□□ MPP06-48S□□、MPP06-48D□□ Model MPP06-24S□□W、MPP06-24D□□W MPP06-48S□□W、MPP06-48D□□W Fuse Rating (A) 2.5 1.25 0.63 0.315 Fuse Rating (A) 1.25 0.63 Fuse Type Slow-Blow Slow-Blow Slow-Blow Slow-Blow Fuse Type Slow-Blow Slow-Blow The table based on the information provided in this data sheet on inrush energy and maximum DC input current at low Vin. MECHANICAL DRAWING A TYPE PIN CONNECTION PIN SINGLE 1 + Vin 11 No pin 12 -Vout 13 +Vout 15 No pin 23 - Vin 24 - Vin DUAL + Vin Common No pin -Vout +Vout - Vin - Vin 1. All dimensions in inch [mm] 2. Tolerance :x.xx±0.02 [x.x±0.5] x.xxx±0.01 [x.xx±0.25] 3. Pin dimension tolerance ±0.004[0.10] P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 6 MPP06 MPP06W Series MECHANICAL DRAWING(CONTINUED) PIN CONNECTION PIN SINGLE 1 Ctrl (Option) / No pin* 2 - Vin 10 Trim (Option) / No pin* 11 No pin / NC ** 14 +Vout 16 -Vout 22 +Vin 23 +Vin B TYPE * ** DUAL Ctrl (Option) / No pin* - Vin Trim (Option) / No pin* -Vout +Vout Common +Vin +Vin If don’t choose Ctrl or Trim option, there is no pin on the corresponding pin number. Pin 11 is “No pin” for MPP06-□□S□□□B-T MPP06-□□S□□□B-PT Pin 11 is “NC” for MPP06-□□S□□□B MPP06-□□S□□□B-P 1. All dimensions in inch [mm] 2. Tolerance :x.xx±0.02 [x.x±0.5] x.xxx±0.01 [x.xx±0.25] 3. Pin dimension tolerance ±0.004[0.10] RECOMMENDED PAD LAYOUT A TYPE B TYPE All dimensions in inch[mm] Pad size(lead free recommended) Through hole 1.11.12.13.15.23.24: Φ0.035[0.90] Top view pad 1.11.12.13.15.23.24: Φ0.044[1.13] Bottom view pad 1.11.12.13.15.23.24: Φ0.071[1.80] * ** All dimensions in inch[mm] Pad size(lead free recommended) Through hole 1.2.10.11.14.16.22.23: Φ0.035[0.90] Top view pad 1.2.10.11.14.16.22.23: Φ0.044[1.13] Bottom view pad 1.2.10.11.14.16.22.23: Φ0.071[1.80] There should be at least 8mm distance between primary and secondary circuit. For further information, please contact P-DUKE. P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 7 MPP06 MPP06W Series THERMAL CONSIDERATIONS The power module operates in a variety of thermal environments. However, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. Proper cooling can be verified by measuring the point as the figure below. The temperature at this location should not exceed “Maximum case temperature”. When operating, adequate cooling must be provided to maintain the test point temperature at or below “Maximum case temperature”. You can limit this temperature to a lower value for extremely high reliability.  Thermal test condition with vertical direction by natural convection (20LFM). TOP VIEW OUTPUT VOLTAGE ADJUSTMENT It allows the user to increase or decrease the output voltage of the module. This is accomplished by connecting an external resistor between the Trim pin and either the +Vout or -Vout pins. With an external resistor between the Trim and -Output pin, the output voltage increases. With an external resistor between the Trim and +Output pin, the output voltage decreases. The external Trim resistor needs to be at least 1/16W of rated power.  Trim Up Equation  Trim constants   GL RU    H    Vo,up  L  K Module □□S3P3B-□T、□□S3P3WB-□T □□S05B-□T、□□S05WB-□T □□S12B-□T、□□S12WB-□T □□S15B-□T、□□S15WB-□T □□S24B-□T、□□S24WB-□T G 5110 5110 10000 10000 56000 H 2050 2050 5110 5110 13000 K 0.8 2.5 9.5 12.5 21.5 L 2.5 2.5 2.5 2.5 2.5 Module □□D05B-□T、□□D05WB-□T □□D12B-□T、□□D12WB-□T □□D15B-□T、□□D15WB-□T G 3000 56000 30000 H 3000 13000 13000 K 7.5 21.5 27.5 L 2.5 2.5 2.5    Trim Down Equation     V L G RD   o,down  H     Vo  Vo,down    P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 8 MPP06 MPP06W Series OUTPUT VOLTAGE ADJUSTMENT(CONTINUED) EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. Trim-up Single Output □□S3P3B-□T、□□S3P3WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.630 RU (kΩ) 385.071 191.511 126.990 94.730 75.374 62.470 53.253 46.340 40.963 36.662 □□S05B-□T、□□S05WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 5.500 RU (kΩ) 253.450 125.700 83.117 61.825 49.050 40.533 34.450 29.888 26.339 23.500 □□S12B-□T、□□S12WB-□T Dual Output △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 12.120 12.240 12.360 12.480 12.600 12.720 12.840 12.960 13.080 13.200 RU (kΩ) 203.223 99.057 64.334 46.973 36.557 29.612 24.652 20.932 18.038 15.723 □□S15B-□T、□□S15WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 15.150 15.300 15.450 15.600 15.750 15.900 16.050 16.200 16.350 16.500 RU (kΩ) 161.557 78.223 50.446 36.557 28.223 22.668 18.700 15.723 13.409 11.557 △V (%) 11 12 13 14 15 16 17 18 19 20 Vout (V) 16.650 16.800 16.950 17.100 17.250 17.400 17.550 17.700 17.850 18.000 RU (kΩ) 10.042 8.779 7.711 6.795 6.001 5.307 4.694 4.149 3.662 3.223 □□S24B-□T、□□S24WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 24.240 24.480 24.720 24.960 25.200 25.440 25.680 25.920 26.160 26.400 RU (kΩ) 570.333 278.667 181.444 132.833 103.667 84.222 70.333 59.917 51.815 45.333 △V (%) 11 12 13 14 15 16 17 18 19 20 Vout (V) 26.640 26.880 27.120 27.360 27.600 27.840 28.080 28.320 28.560 28.800 RU (kΩ) 40.030 35.611 31.872 28.667 25.889 23.458 21.314 19.407 17.702 16.167 □□D05B-□T、□□D05WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±5.050 ±5.100 ±5.150 ±5.200 ±5.250 ±5.300 ±5.350 ±5.400 ±5.450 ±5.500 RU (kΩ) 72.000 34.500 22.000 15.750 12.000 9.500 7.714 6.375 5.333 4.500 □□D12B-□T、□□D12WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±12.120 ±12.240 ±12.360 ±12.480 ±12.600 ±12.720 ±12.840 ±12.960 ±13.080 ±13.200 RU (kΩ) 570.333 278.667 181.444 132.833 103.667 84.222 70.333 59.917 51.815 45.333 □□D15B-□T、□□D15WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±15.150 ±15.300 ±15.450 ±15.600 ±15.750 ±15.900 ±16.050 ±16.200 ±16.350 ±16.500 RU (kΩ) 237.000 112.000 70.333 49.500 37.000 28.667 22.714 18.250 14.778 12.000 P-DUKE Technology Co., Ltd. www.pduke.com 2023.03.31 Page 9 MPP06 MPP06W Series OUTPUT VOLTAGE ADJUSTMENT(CONTINUED) Trim-down Single & Dual Output □□S3P3B-□T、□□S3P3WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.970 RD (kΩ) 116.719 54.779 34.133 23.810 17.616 13.486 10.537 8.325 6.604 5.228 □□S05B-□T、□□S05WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 4.950 4.900 4.850 4.800 4.750 4.700 4.650 4.600 4.550 4.500 RD (kΩ) 248.340 120.590 78.007 56.715 43.940 35.423 29.340 24.778 21.229 18.390 □□S12B-□T、□□S12WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 11.880 11.760 11.640 11.520 11.400 11.280 11.160 11.040 10.920 10.800 RD (kΩ) 776.557 380.723 248.779 182.807 143.223 116.834 97.985 83.848 72.853 64.057 □□S15B-□T、□□S15WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 14.850 14.700 14.550 14.400 14.250 14.100 13.950 13.800 13.650 13.500 RD (kΩ) 818.223 401.557 262.668 193.223 151.557 123.779 103.938 89.057 77.483 68.223 □□S24B-□T、□□S24WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) 23.760 23.520 23.280 23.040 22.800 22.560 22.320 22.080 21.840 21.600 RD (kΩ) 4947.667 2439.333 1603.222 1185.167 934.333 767.111 647.667 558.083 488.407 432.667 □□D05B-□T、□□D05WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±4.950 ±4.900 ±4.850 ±4.800 ±4.750 ±4.700 ±4.650 ±4.600 ±4.550 ±4.500 RD (kΩ) 219.000 106.500 69.000 50.250 39.000 31.500 26.143 22.125 19.000 16.500 □□D12B-□T、□□D12WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±11.880 ±11.760 ±11.640 ±11.520 ±11.400 ±11.280 ±11.160 ±11.040 ±10.920 ±10.800 RD (kΩ) 4947.667 2439.333 1603.222 1185.167 934.333 767.111 647.667 558.083 488.407 432.667 □□D15B-□T、□□D15WB-□T △V (%) 1 2 3 4 5 6 7 8 9 10 Vout (V) ±14.850 ±14.700 ±14.550 ±14.400 ±14.250 ±14.100 ±13.950 ±13.800 ±13.650 ±13.500 RD (kΩ) 2707.000 1332.000 873.667 644.500 507.000 415.333 349.857 300.750 262.556 232.000 P-DUKE Technology Co., Ltd. Tel Fax Email Web Add +886-4-2359-0668 +886-4-2359-1337 sales@pduke.com www.pduke.com No. 36, 22nd Rd., Taichung Industrial Park, Taichung, Taiwan, R.O.C. 2023.03.31 Page 10