RS1A

RS1A thru RS1M SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES Ldeaf for surface mount applications Easy pick and place Buit-in strain relief Fast switching speed MECHANICAL DATA Case JEDEC DO-214AC molded plastic Epoxy UL 94V-0 rate flame retardant Metallurgically bonded construction Polarity Color band denotes cathode end Mounting position Any Weight 0.063 grams MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL RS1A Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .0375 (9.5mm)Lead Length at TA =500C Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneoue at 1.0A DC Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1000C Maximum Reverse Recovery Time (NOTE 1) Typical Junction Capacitance (NOTE 2) Operating Temperature Range Storage Temperature Range 0 RS1B 100 70 100 RS1D 200 140 200 RS1G 400 280 400 1.0 RS1J 600 420 600 RS1K 800 560 800 RS1M 1000 700 1000 UNITS Volts Volts Volts Amps VRRM VRMS VDC I(AV) 50 35 50 IFSM VF IR TRR CJ TJ TSTG 150 30 1.3 5.0 100 250 15 +175 500 Amps Volts A nS pF 0 C C -65 to +175 0 NOTES 1. Rverse Recovery Time Test Condibons: IF=0.5A, I R=1.0A, l RR=0.25A 2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC www.paceleader.tw 1 RS1A thru RS1M SURFACE MOUNT FAST RECOVERY RECTIFIER RATING AND CHARACTERISTICS CURVES RS1A THRU RS1M Fig. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 20 40 60 80 100 120 o Fig. 2 - TYPICAL JUNCTION CHARACTERISTICS CAPACITANCE. (pF) SINGLE PHASE HALF W AVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 10 TJ=25C 0 140 160 180 LEAD TEMPERATURE, C 1 1 10 100 REVERSE VOLTAGE, Vdc Fig. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 25 10 Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, AMPERES 20 15 10 5 8.3ms Single Half Since-Wave JEDEC Method 0 TJ=25C 1 Pulse Width=300 S 1% Duty Cycle 0.1 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60HZ 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLT AGE, VOLTS Fig. 5 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 Noninductive 10 Noninductive trr +0.5A () PULSE GENERATOR NOTE 2 (+) 25 Vdc (approx) () D.U.T. 0 -0.25 1 NONInductive OSCILLOSCOPE NOTE 1 (+) NOTES:1. Rise Time=7ns max. Input Impedance=1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance=50 Ohms. -1.0 SET TIME BASE FOR 10ns/cm 1cm www.paceleader.tw 2