RS1AB

RS1AB thru RS1MB SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .030(0.76) .050(1.27) .004(.102) .008(.203) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) FEATURES Ldeaf for surface mount applications Glass Passivated Chip Low Reverse Leakage Current Low Forward Voltage Drop And High Current Capability Plastic Meterial Has UL Flammability Classificatiom 94V-0 MECHANICAL DATA Case JEDEC DO-214AA molded plastic Epoxy UL 94V-0 rate flame retardant Metallurgically bonded construction Polarity Color band denotes cathode end Mounting position Any Weight 0.003 Ounce, 0.093 grams MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL RS1AB Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .0375 (9.5mm)Lead Length at TA =550C Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneoue at 1.0A DC Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1000C Maximum Reverse Recovery Time Typical Junction Capacitance Operating Temperature Range Storage Temperature Range NOTES 1. Measured at 1 MHz and applied reverse Voltag of 4.0VDC 2. Thermal Resistance Junction to case 0 RS1BB 100 70 100 RS1DB RS1GB 200 140 200 400 280 400 1.0 RS1JB 600 420 600 RS1KB RS1MB 800 560 800 1000 700 1000 UNITS Volts Volts Volts Amps VRRM VRMS VDC I(AV) 50 35 50 IFSM VF IR TRR CJ TJ TSTG 150 30 1.3 5.0 100 250 15 +175 500 Amps Volts A nS pF 0 C C -65 to +175 0 www.paceleader.tw 1 RS1AB thru RS1MB SURFACE MOUNT FAST RECOVERY RECTIFIER RATING AND CHARACTERISTICS CURVES RS1AB THRU RS1MB AVERAGE FORWARD CURRENT AMPERES 1.0 PEAK FORWARD SURGE CURRENT, AMPERES 30 0.8 0.6 20 0.4 10 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 0.2 0 25 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 1 2 5 10 20 50 100 50 75 100 125 150 175 LEAD TEMPERATURE , C NUMBER OF CYCLES AT 60Hz FIG.1 Forward Current Derating Curve FIG.2 Maximum Non-Pepetitive Surge Current 10 1000 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 100 TJ = 100 C 1.0 10 TJ = 25 C 1.0 TJ = 25 C 0.1 0.1 .01 0 0.2 0.4 0.6 0.8 1.0 PULSEWIDTH:300 s 0.01 1.2 1.4 1.6 1.8 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (VOLTS) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 Typcial Forward Characteristics FIG.4 Typical Reverse Characteristics www.paceleader.tw 2