S1BB

S1AB thru S1MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .002(.051) .008(.203) .200(5.08) .220(5.59) .030(0.76) .050(1.27) Dimensions in inches and (millimeters) FEATURES For surface mount applications Glass passivated junction Low profile package High current capability Easy pick and place High surge current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls MECHANICAL DATA Case JEDEC DO-214AA molded plastic Terminals Pure tin plated, lead free Polarity Indicated by cathode band Package 12mm tape EIA STD RS-481 Weight 0.093gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =1100C Peak Forward Surge Current 8.3mm Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1250C Typical Junction Capacitance (NOTE 1) Maximum Thermal Resistance (NOTE 2) Operating and Storage Temperature Range R 0 S1AB 50 35 50 S1BB 100 70 100 S1DB 200 140 200 S1GB 400 280 400 1.0 30 1.1 5 50 12 30 S1JB 600 420 600 S1KB 800 560 800 S1MB 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A pF 0 VRRM VRMS VDC I(AV) IFSM VF IR CJ JL C/W 0 TJ TSTG -55 to +150 C NOTES 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. Measured on P .C.B. Board with 0.27 x0.27 (7.0x7.0mm) copper pad areas www.paceleader.tw 1 S1AB thru S1MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S1AB THRU S1MB www.paceleader.tw 2