S2KB

S2AB thru S2MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 2.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .030(0.76) .050(1.27) .004(.102) .008(.203) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) FEATURES For surface mount applications Glass passivated junction Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls MECHANICAL DATA Case JEDEC DO-214AA molded plastic Terminals Solder plated, solderable per MIL-STD-202, Method 208 Polarity Color band denotes cathode end Standard Package 12mm tape (EIA STD EIA-481) Weight 0.003 ounce, 0.093gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =1000C Peak Forward Surge Current 8.3mm Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1250C Typical Junction Capacitance (NOTE 1) Maximum Thermal Resistance (NOTE 2) R R 0 S2AB 50 35 50 S2BB 100 70 100 S2DB 200 140 200 S2GB 400 280 400 2.0 50 1.1 5 125 30 53 16 S2JB 600 420 600 S2KB 800 560 800 S2MB 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A pF 0 VRRM VRMS VDC I(AV) IFSM VF IR CJ JA JL C/W Operating and Storage Temperature Range TJ TSTG -55 to +150 0 C NOTES 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. The thermal resistance from junction to ambient and junction to lead P .C.B. mounted on 0.27x0.27 (7.0x7.0mm) copper pad areas www.paceleader.tw 1 S2AB thru S2MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S2AB THRU S2MB Fig. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT AMPERES 2.4 2.0 1.6 1.2 0.8 0.4 0 0 20 40 60 80 100 120 140 160 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.3x0.3"(8.0x8.0mm) COPPER PAD AREAS Fig. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) 60 50 40 30 20 10 5 1.0 TA = 55 C Single Sine-Wave JEDEC Method o 10 CYCLE 10 20 40 60 100 LEAD TEMPERATURE, 0C 2.0 4.0 6.0 NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS REVERSE CURRENT MICROAMPERES 100 10 0 TJ=125C Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.4 1 0.1 0.01 0.001 0 20 40 60 80 100 120 140 TJ=75C 0 TJ=25C 0 0.6 0.8 1 1.2 1.4 1.6 1.8 2 PERCENT OF PEAK REVERSE VOLTAG % E, E, INSTANTANEOUS FORWARD VOLTAG (V) Fig. 5 - TRANSIENT THERMAL IMPEDANCE THERMAL IMPEDANCE ( 0C/W ) 1,000 500 200 100 50 20 10 5 2 1 0.01 Fig. 6 - TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE, pF Units Mounted on 2 20in2(5.4mm)+0.5m il inches (0.013mm) Thick Copper Land Areas 50 20 10 5 2 1 0.01 0 TJ=25C f=1.0MHz Vsig=50m Vp-p 0.1 1 10 100 0.1 1 10 100 HEATING TIME (SEC) REVERSE VOLTAGE, (V) www.paceleader.tw 2