SK58C

SK52C thru SK510C SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 TO 1000 VOLTS CURRENT - 5.0 AMPERES SMC/DO-214AB .108(2.75) .128(3.25) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .002(.051) .008(.203) .305(7.75) .320(8.13) .030(0.76) .050(1.27) Dimensions in inches and (millimeters) FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications Low profile package Built-in strain relief Metal to silicon rectifier, majority carrier conduction Low power loss, high efficiency High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed 260oC/10 seconds at terminsls High temperature soldering 260oC/10 seconds at terminsls Pb free product at available 99% Sn above meet Rohs environment substance directive request MECHANICAL DATA Case JEDEC DO-214AB molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Color band denotes positive end (cathode) Standard Package 16mm tape (EIA STD EIA-481) Weight 0.007 ounce, 0.21gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Resistive or inductive load SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (See Figure 1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 5.0A (Note 1) Maximum DC Reverse Current (NOTE 1) TA=25 C at Rated DC Blocking Voltage TA=1000C Maximum Thermal Resistance (NOTE 2) Operating at Storag Temprature Range TJ Storage Temperature Range R R 0 SK52C SK53C SK54C SK55C SK56C SK58C SK59C SK510C UNITS Volts Volts Volts Amps VRRM VRMS VDC I(AV) 20 14 20 30 21 30 40 28 40 50 35 50 5.0 60 42 60 80 56 80 90 63 90 100 70 100 IFSM VF IR JL JA 100 0.5 0.75 0.5 20 17 55 0.85 Amps Volts mA 0 C/W 0 TJ TSTG -50 to +150 -55 to +150 C C 0 NOTES 1. Pulse test with pw=300 S, 2% duty cycle 2. Mounted on P .C.B with 14mm2 (0.13mm thick) copper pad areas www.paceleader.com.tw 1 SK52C thru SK510C SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER RATINGS AND CHARACTERISTIC CURVES S52C THRU SK510C Fig. 1 - FORWARD CURRENT DERATING CURVE Fig.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Fig. 3 - TYPICAL REVERSE CHARACTERISTICS Fig. 4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS www.paceleader.com.tw 2