AN6913L

AN6913, AN6913L Dual Comparators s Overview The AN6913 and AN6913L are dual (2-channel) comparators with a wide range of operating supply voltage. AN6913 2.4±0.25 3.3±0.25 6.0±0.3 Unit:mm 8 23.3±0.3 s Features • Wide range of operating supply voltage Single power supply:2 to 36V Dual power supply:±1 to±18V • Low circuit current:0.6mA typ. • Wide range of common-mode input voltage :0V to VCC–1.5V (single power supply) • Open collector output 6 5 4 1.5±0.25 2 1 0.3 – 0.05 + 0.1 3.0±0.3 9-pin SIL Plastic Package (SIP009-P-0000C) AN6913L 9 8 6 21.7±0.3 5 4 3 2 1 1.0±0.25 4.3±0.3 2.54 0.5±0.1 7 0.4±0.25 2.7±0.25 + 0.1 0.3 – 0.05 9-pin SIL Plastic Package (SIP009-P-0000A) s Block Diagram – Ch.1 + – Ch.2 + 1 VCC 2 VO1 3 Vin1– 4 Vin1+ 5 GND 6 Vin2+ 7 Vin2– 8 VO2 9 VCC 1.2±0.25 1.4±0.25 1.35±0.25 1.4±0.3 30˚ 3 0.5±0.1 7 1.5±0.25 2.54 9 Unit:mm s Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 9 Pin name Supply voltage Ch.1 output Ch.1 inverting input Ch.1 non-inverting input GND Ch.2 non-inverting input Ch.2 inverting input Ch.2 output Supply voltage s Absolute Maximum Rating (Ta=25˚C) Parameter Supply voltage Voltage Common-mode input voltage Differential input voltage Output applied voltage Power dissipation Operating ambient temperature Storage temperature Symbol VCC VICM *1 VID *2 V1, V7 PD Topr Tstg Rating 36 – 0.3 to +36 36 24 500 –30 to +85 –55 to +150 Unit V V V V mW ˚C ˚C *1 The common-mode input voltage is applied to the non-inverting input pin and inverting input pin simultaneously. *2 Differential input corresponds to the potential difference between the non-inverting input pin and inverting input pin. s Recommended Operating (Ta=25˚C) Parameter Operating supply voltage range Symbol VCC Range Single power supply 2V to 36V Dual power supply ±1V to ±18V s Electrical Characteristics (VCC=5V, Ta=25˚C) Parameter Input offset voltage Input offset current Input bias current Voltage gain Common-mode input voltage width Supply current Response time Output sink current Output voltage low level Output pin leak current Symbol VI (offset) IIO IBias GV VCM ICC tr ISINK VOL IO (Leak) RL= ∞ RL=5.1kΩ, VRL=5V VREF= 0V, VIN=1V, VO< 1.5V = VREF= 0V, VIN=1V, ISINK=3mA VIN= 0V, VREF=1V, VO=5V 10 0.2 0.1 0.4 RL=15kΩ 0 0.6 1.3 200 VCC –1.5 1.5 Condition min typ 1 max 5 50 250 Unit mV nA nA V/mV V mA µs mA V nA s Characteristics Curve ICC –VCC 1.6 RL=∞ 1.4 120 VCC=5V 100 0.20 IBias–Ta 0.24 VOL–Ta VCC=5V ISINK=3mA Input Bias Current IBias (nA) Supply Current ICC (mA) 1.2 1.0 0.8 0.6 0.4 0.2 0 Ta=–30˚C 80 Output Voltage VOL (V) 0.16 Ta=25˚C Ta=85˚C 60 0.12 40 0.08 20 0.04 0 10 20 30 40 0 –40 –20 0 20 40 60 80 100 120 0 –40 –20 0 20 40 60 80 100 120 Supply Voltage VCC (V) Ambient Temperature Ta (˚C) Ambient Temperature Ta (˚C) VOL– ISINK Output Voltage VO (V) 4.0 VCC=5V 3.5 6 5 4 3 2 1 0 100 50 0 Transfer Characteristic (1) Output Voltage VO (V) 6 5 4 3 2 1 0 0 –50 –100 Overdrive 5mV 20mV 50mV 80mV Transfer Characteristic (2) Overdrive 5mV 20mV 50mV 80mV VIN Output Voltage VOL (V) 3.0 2.5 2.0 1.5 1.0 0.5 0 Ta=25˚C –30˚C 85˚C VCC=5V VIN – + 5.1kΩ VO VCC=5V 5.1kΩ – + VO Input Voltage VIN (mV) 0 5 10 15 20 25 30 0 1 2 3 4 Input Voltage VIN (mV) 0 1 2 3 4 Output Sink Current ISINK (mA) Time t (µs) Time t (µs)