AXK8L80125BG

AXK7L, 8L NARROW PITCH (0.4mm) CONNECTORS F4 5. Connectors for inspection available Connectors for inspection are available that are ideal for modular unit inspection and inspection in device assembly processes. Socket Header Compliance with RoHS Directive 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. (See Page 6 for details of the structure) 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering terminals and the contact points improve the mating strength and provide tactile feedback when locked. Socket Header APPLICATIONS Compact portable devices “Cellular phones, DVD, DSC, etc” Example of connection between a board and an FPC Before mating FPC F4 connector Reinforcing plate PCB After mating Locking structure of the soldering terminals 0.9mm FEATURES 1. The lowest profile class among twopiece connectors in the world (Mated height: 0.9mm) Achieved both a 0.4 mm pitch and an ultra low profile of 0.9 mm high when mated, contributing to further thickness reduction of products. 4. Easy to design product circuits 1) An insulating wall provided for the bottom surface of the connector prevents contact between the pattern on the PC board and the metal pins, enabling pattern wiring under the connector, and thus contributing to the reduction in size of PC boards. Pattern wiring under the connector is possible. panasonic-electric-works.net/ac Narrow-pitch connectors NARROW-PITCH CONNECTORS FOR BOARD-TO-FPC CONNECTION AXK7L, 8L Narrow-pitch connectors ORDERING INFORMATION AXK AXK: Narrow Pitch Connector Series Series name; 7L: F4 (0.4 mm pitch) Socket 8L: F4 (0.4 mm pitch) Header Number of contacts (2 digits) Mated height 2: For mated height 0.9 mm 1: For mated height 0.9 mm Functions 2: Without positioning bosses Surface treatment (Contact portion / Terminal portion) Note 2 7: Ni plating on base, Au plating on surface (for Ni barrier available) 5: Ni plating on base, Au plating on surface Other specifications B: Soldering terminals with fork type terminal Note 1 Packing G: 3,000 pieces embossed tape and plastic reel × 2 Notes: 1. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting, and a construction that makes it difficult when mounting for excess solder to interfere with the socket. Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern. 2. The part number will be changed as follows due to the change in the plating specifications for the metal clips. This change will apply to production from December 2009 onwards. (There will be no change to the contact portion and terminal portion.) (Socket) 3: Ni plating on base, Au plating on surface (for Ni barrier available) (Header) 4: Ni plating on base, Au plating on surface G panasonic-electric-works.net/ac AXK7L, 8L Mated height Number of contacts 10 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 Part number Socket Products with plating change to soldering terminals (in effect from Dec. ’09) AXK7L10223G AXK7L12223G AXK7L14223G AXK7L16223G AXK7L20223G AXK7L22223G AXK7L24223G AXK7L26223G AXK7L28223G AXK7L30223G AXK7L32223G AXK7L34223G AXK7L36223G AXK7L38223G AXK7L40223G AXK7L44223G AXK7L48223G AXK7L50223G AXK7L54223G AXK7L60223G AXK7L66223G AXK7L70223G AXK7L80223G Packing Header Header Products with plating change to soldering terminals (in effect from Dec. ’09) AXK8L10124BG AXK8L12124BG AXK8L14124BG AXK8L16124BG AXK8L20124BG AXK8L22124BG AXK8L24124BG AXK8L26124BG AXK8L28124BG AXK8L30124BG AXK8L32124BG AXK8L34124BG AXK8L36124BG AXK8L38124BG AXK8L40124BG AXK8L44124BG AXK8L48124BG AXK8L50124BG AXK8L54124BG AXK8L60124BG AXK8L66124BG AXK8L70124BG AXK8L80124BG Inner carton (1 reel) Outer carton Socket AXK7L10227G AXK7L12227G AXK7L14227G AXK7L16227G AXK7L20227G AXK7L22227G AXK7L24227G AXK7L26227G AXK7L28227G AXK7L30227G AXK7L32227G AXK7L34227G AXK7L36227G AXK7L38227G AXK7L40227G AXK7L44227G AXK7L48227G AXK7L50227G AXK7L54227G AXK7L60227G AXK7L66227G AXK7L70227G AXK7L80227G 0.9 mm AXK8L10125BG AXK8L12125BG AXK8L14125BG AXK8L16125BG AXK8L20125BG AXK8L22125BG AXK8L24125BG AXK8L26125BG AXK8L28125BG AXK8L30125BG AXK8L32125BG AXK8L34125BG AXK8L36125BG AXK8L38125BG AXK8L40125BG AXK8L44125BG AXK8L48125BG AXK8L50125BG AXK8L54125BG AXK8L60125BG AXK8L66125BG AXK8L70125BG AXK8L80125BG 3,000 pieces 6,000 pieces (2 reels) Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please contact us. Samples: Available. Please contact us. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. 3. Please contact us regarding different number of contacts. 4. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting, and a construction that makes it difficult when mounting for excess solder to interfere with the socket. Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern. 5. Since the plating specifications for the metal clips will be changed starting with production in December 2009 onwards, the digit “7” in the 10th place of the part number for sockets will be changed to “3”, and “5” for headers will be changed to “4”. Be careful when placing an order. SPECIFICATIONS 1. Characteristics Item Rated current Rated voltage Electrical characteristics Breakdown voltage Insulation resistance Contact resistance Ambient temperature Soldering heat resistance Storage temperature Specifications 0.3A/terminal (Max. 5 A at total terminals) 60V AC/DC 150V AC for 1 min. Min. 1,000MΩ (Initial) Max. 90mΩ –55°C to +85°C Max. peak temperature of 260°C (on the surface of the PC board around the connector terminals) 300°C within 5 sec, 350°C within 3 sec. –55°C to +85°C (Product only) –40°C to +50°C (Emboss packing) 5 cycles, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 120 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 24 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 48 hours, contact resistance max. 90mΩ 50 times 20 contacts; Socket: 0.03g Header: 0.01g Conditions — — Rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1mA Using 250V DC megger (applied for 1 min.) Based on the contact resistance measurement method specified by JIS C 5402. No freezing at low temperatures Infrared reflow soldering Soldering iron No freezing at low temperatures Sequence 0 1. –55 –3 °C, 30 min. 2. ~ , Max. 5 min. 3. 85 +3 °C, 30 min. 0 4. ~ , Max. 5 min. Temperature 40±2°C, humidity 90 to 95% R.H. Temperature 35±2°C, saltwater concentration 5±1% Temperature 40±2°C, gas concentration 3±1 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/hours — Environmental characteristics Thermal shock resistance (header and socket mated) Humidity resistance (header and socket mated) Saltwater spray resistance (header and socket mated) H2S resistance (header and socket mated) Lifetime characteristics Unit weight Insertion and removal life panasonic-electric-works.net/ac Narrow-pitch connectors PRODUCT TYPES AXK7L, 8L Narrow-pitch connectors 2. Material and surface treatment Part name Molded portion Material LCP resin (UL94V-0) Surface treatment — Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for front edge of terminal) However, the area adjacent to the socket terminal is exposed to Ni on base. Metal clips Note): Ni plating on base, Sn plating on surface (Socket: except for front edge of the terminal) Contact/Post Copper alloy Note: The following change will apply to production from December 2009 onwards. Socket: Ni plating on base, Pd + Au flash plating on surface (Expect for front edge of terminal) Header: Ni plating on base, Au plating on surface (Expect for front edge of terminal) DIMENSIONS (unit: mm) • Socket (Mated height 0.9 mm) CAD Data The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac Dimension table (mm) Number of contacts/ Dimensions 10 0.87 A B±0.1 0.40±0.05 0.15±0.03 This surface C0.15 Suction face 0.80 5.00 Terminal coplanarity 0.08 (Contact and clips (soldering terminal)) 0.60 Soldering terminal A 4.4 4.8 5.2 5.6 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.0 10.4 11.2 12.0 12.4 13.2 14.4 15.6 16.4 18.4 B 1.6 2.0 2.4 2.8 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.4 9.2 9.6 10.4 11.6 12.8 13.6 15.6 C 3.0 3.4 3.8 4.2 5.0 5.4 5.8 6.2 6.6 7.0 7.4 7.8 8.2 8.6 9.0 9.8 10.6 11.0 11.8 13.0 14.2 15.0 17.0 F F 0.40±0.05 C±0.15 Soldering terminal 0.10±0.03 F-F cross section (5.00) General tolerance: ±0.2 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 4.40 5.00 0.50 • Header (Mated height: 0.9 mm) CAD Data Dimension table (mm) Number of contacts/ Dimensions 10 Terminal coplanarity A B C±0.1 0.40±0.05 0.15±0.03 0.80±0.05 1.20±0.05 Suction face 2.30 0.63 A 4.0 4.4 4.8 5.2 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.0 10.8 11.6 12.0 12.8 14.0 15.2 16.0 18.0 B 3.74 4.14 4.54 4.94 5.74 6.14 6.54 6.94 7.34 7.74 8.14 8.54 8.94 9.34 9.74 10.54 11.34 11.74 12.54 13.74 14.94 15.74 17.74 C 1.6 2.0 2.4 2.8 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.4 9.2 9.6 10.4 11.6 12.8 13.6 15.6 0.08 (Contact and soldering terminal) 0.65 R0 0.08±0.03 .1 5 R0 Soldering terminal 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 3.36 0.27 Clips (soldering terminals) .1 5 General tolerance: ±0.2 4.10 panasonic-electric-works.net/ac AXK7L, 8L • Socket and header are mated Header 0.90±0.15 Socket EMBOSSED TAPE DIMENSIONS (unit: mm) (Common for respective contact type, socket and header) Tape dimensions (Conforming to JIS C 0806-1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A±0.3 C 1.75 A±0.3 B C 1.75 380 dia. Top cover tape Plastic reel dimensions (Conforming to EIAJ ET–7200B) D±1 Taping reel Pull out direction Pull out direction 4 2 4 2 Embossed carrier tape Embossed mounting-hole 8.0 8.0 1.5+0.1 dia. 0 1.5+0.1 dia. 0 TABLE OF DIMENSIONS Mated height Common for socket and header: 0.9mm Number of contacts Max. 24 26 to 70 80 Type of taping Tape I Tape I Tape II A 16.0 24.0 32.0 B — — 28.4 C 7.5 11.5 14.2 D 17.4 25.4 33.4 Quantity per reel 3000 3000 3000 Connector orientation with respect to direction of progress of embossed tape Type Direction of tape progress Socket Common for F4 Header Note: There is no indication on this product regarding top-bottom or left-right orientation. panasonic-electric-works.net/ac Narrow-pitch connectors AXK7L, 8L Narrow-pitch connectors CONNECTOR FOR INSPECTION USAGE APPLICATIONS WITH 3,000 INSERTION AND (0.4 mm PITCHES) REMOVAL TIMES NARROW PITCH CONNECTOR F4 FOR INSPECTION USAGE FEATURES 1. 3,000 insertion and removals (when as recommended) 2. Same external dimensions and foot pattern as standard type. 3. Improved mating Insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (We cannot warrant anything regarding mating retention.) APPLICATIONS Ideal for module unit inspection and equipment assembly inspection Socket Header Compliance with RoHS Directive TABLE OF PRODUT TYPES ✩: Available for sale Product name F4 for inspection 10 ✩ 12 ✩ 14 ✩ 16 ✩ 20 ✩ 22 ✩ 24 ✩ 26 ✩ 28 ✩ 30 ✩ Number of contacts 32 34 36 38 ✩ ✩ ✩ ✩ 40 ✩ 44 ✩ 48 ✩ 50 ✩ 54 ✩ 60 ✩ 66 ✩ 70 ✩ 80 ✩ Notes: 1. Please inquire about numbers of contacts other than those given above. 2. Please inquire with us regarding delivery times. 3. Please keep the minimum unit for ordering no less than 50 pieces per lot. 4. Please inquire for further information. PRODUCT TYPES Socket Specifications Without positioning bosses Part No. AXK7LE∗∗26G Header Specifications Without positioning bosses Part No. AXK8LE∗∗26BG Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. panasonic-electric-works.net/ac AXK7L, 8L 1. Removal by pulling up from an end causes the entire connector removal force to concentrate on the soldering terminals and end terminals. Therefore, please lift and remove from the side. Doing so will also prevent cracking of the soldered parts. Socket Recommended PC board pattern (Mount pad arrangement pattern) 1.40±0.03 0.40±0.03 0.23±0.03 0. 40 Header Recommended PC board pattern (Mount pad arrangement pattern) 1.40±0.03 0.40±0.03 0.23±0.03 Max. 2.20 0.57±0.03 4.70±0.03 : Insulation area 1.00±0.03 (Max. 2.20) (3.20±0.03) (4.70±0.03) Mounting pad : Insulation area 3.60±0.03 4.00±0.03 5.60±0.03 Relation between connector and mounting pad NG Pull Recommended metal mask pattern Metal mask thickness: Here, 150 µm (Terminal portion opening area ratio: 53 %) (Metal portion opening area ratio: 100 %) (0.49) 1.40±0.01 1.00±0.01 Recommended metal mask pattern Metal mask thickness: Here, 150 µm (Terminal portion opening area ratio: 52 %) (Metal portion opening area ratio: 80 %) (0.45) 1.40±0.01 0.46±0.01 2. PC Boards and Recommended Metal Mask Patterns Connectors are mounted with high density, with a pitch interval of 0.4 to 0.5 mm. In order to reduce solder bridge and other issues make sure the proper levels of solder are used. The figures to the right are recommended metal mask patterns. Please use them as a reference. In particular, if a lot of solder is used in the header retaining soldering terminals, it might interfere with and cause incomplete socket mating. Therefore, please follow the recommended conditions give on the right. 5.60±0.01 3.60±0.01 4.42±0.01 5.40±0.01 1.40±0.01 0.40±0.01 (1.00) 0.20±0.01 0.40±0.01 0.20±0.01 0.40±0.01 Recommended metal mask pattern Metal mask thickness: Here, 120 µm (Terminal portion opening area ratio: 66 %) (Metal portion opening area ratio: 100 %) 1.40±0.01 1.00±0.01 Recommended metal mask pattern Metal mask thickness: Here, 120 µm (Terminal portion opening area ratio: 66 %) (Metal portion opening area ratio: 100 %) 1.40±0.01 0.57±0.01 (0.57) 3.36±0.01 (0.61) 5.60±0.01 3.60±0.01 4.18±0.01 5.40±0.01 1.40±0.01 0.40±0.01 (1.00) 0.20±0.01 0.40±0.01 0.20±0.01 0.40±0.01 For other details, please verify with the product specification sheets. panasonic-electric-works.net/ac 4.50±0.01 3.60±0.01 4.50±0.01 0.40±0.03 1.40±0.03 3.20±0.03 Narrow-pitch connectors NOTES C C 0. 40 C 0. 40