Aluminum Electrolytic Capacitors/ HB
Snap-in Type
Series: HB Type : TS
20 to 25 % smaller than series TS-HA RoHS directive compliant
Country of Origin
n Features Endurance: 105°C 2000 h n Recommended Applications n Specifications
Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Frequency Correction Factor for Ripple Current
Japan U.S.A(ii) Malaysia (ii) Regarding USA product, , Please check PEDCA s Catalog. -25 to + 105°C 315 to 450 V .DC
Smoothing circuits, AC adaptor - 40 to + 105°C 160 to 250 V .DC 330 to 2700 µ F
82 to 820 µ F ±20 % (120Hz/+20°C) 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C. C:Capacitance(µF) V: W.V. (V.DC) Please see the attached standard products list. Frequency (Hz) 50 60 100 120 500 1k 10k to 0.75 0.80 0.95 1.00 1.20 1.25 1.40 Correction Factor After 2000 hours application of DC voltage with specified ripple current ( < rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Capacitance change tan δ DC leakage current ±20 % of initial measured value < 200 % of initial specified value < initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Endurance
Shelf Life
n Dimensions in mm (not to scale)
Polarity bar
φD+1.0 max
PET Sleeve
(10.0) 2-φ2.0±0.1
10.0±0.1
Vent
L+2.0 max
4.0 ± 0.5
Recommended PWB piercing plan
0.8 - 0.1
4.0±0.5
+0.2
2.0 max
Terminal
(t= 0.8)
(3.5)
Bottom of can
1.5 ± 0.2
Standard terminal type does not require terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
EE143
Aluminum Electrolytic Capacitors/ HB
n Standard Products
W.V. (V) Cap.
(±20%)
Case size
Dia. Length
Specification
Part No.
PET Sleeve Terminal Length
(Without P.V.C.plate)
Min.PackagingQ'ty
(µF) 4 70 560 680 820
(mm) 22 22 22 25 22 25 22
Ripple current tan δ (120Hz) (120Hz) (+105°C) (+20°C) (mm) (A)
4.0mm
(pcs) 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 200 200 200 200 200 200 200 100 200 100 200 100 100 200 200 200 200 200 200 200 200 200 200
30 35 40 30 45 35 50 40 30 25 45 35 30 40 30 45 35 45 50 30 45 35 50 40 30 45 35 50 40 30 45 35 30 25 35 30 40 30 25 45 35 45
1.4 1.5 1.7 1.7 2.0 2.0 2.2 2.2 2.2 2.2 2.3 2.3 2.3 2.5 2.5 2.7 2.7 2.9 3.1 1.5 1.7 1.7 2.0 2.0 2.0 2.2 2.2 2.3 2.3 2.3 2.5 2.5 1.3 1.3 1.4 1.4 1.5 1.5 1.5 1.7 1.7 2.0
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
ECEC2CB471BJ ECEC2CB561BJ ECEC2CB681BJ ECEC2CB681CJ ECEC2CB821BJ ECEC2CB821CJ ECEC2CB102BJ ECEC2CB102CJ ECEC2CB102DJ ECEC2CB102EJ ECEC2CB122CJ ECEC2CB122DJ ECEC2CB122EJ ECEC2CB152DJ ECEC2CB152EJ ECEC2CB182DJ ECEC2CB182EJ ECEC2CB222EJ ECEC2CB272EJ ECEC2PB561CJ ECEC2PB681BJ ECEC2PB681CJ ECEC2PB821BJ ECEC2PB821CJ ECEC2PB821DJ ECEC2PB102CJ ECEC2PB102DJ ECEC2PB122CJ ECEC2PB122DJ ECEC2PB122EJ ECEC2PB152DJ ECEC2PB152EJ ECEC2DB391BJ ECEC2DB391CJ ECEC2DB471BJ ECEC2DB471CJ ECEC2DB561BJ ECEC2DB561CJ ECEC2DB561DJ ECEC2DB681BJ ECEC2DB681CJ ECEC2DB821CJ
1000 160 1200 1500 1800 2200 2700 560 680
25 30 35 25 30 35 30 35 30 35 35 35 25 22 25 22
820 180 1000
25 30 25 30 25
1200 1500 390 470
30 35 30 35 22 25 22 25 22
200
560 680 820
25 30 22 25 25
Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
EE144
Aluminum Electrolytic Capacitors/ HB
n Standard Products
W.V. (V) Cap.
(±20%)
Case size
Dia.
Specification
Part No.
PET Sleeve Terminal Length
(Without P.V.C.plate)
Min.PackagingQ'ty
(µF) 820 1000
(mm) 30 35 25 30 35
Ripple Length current tan δ (120Hz) (120Hz) (+105°C) (+20°C) (mm) (A)
4.0mm
(pcs) 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100
30 25 50 35 30 40 35 50 40 45 50 30 25 50 40 30 45 25 50 40 30 45 35 50 40 45 50 30 35 25 50 40 30 45 35 50 40 30 45 35 50 40
2.0 2.0 2.2 2.2 2.2 2.3 2.3 2.5 2.5 2.7 2.9 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.7 1.7 1.7 2.0 2.0 2.2 2.2 2.3 2.5 0.9 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.5 1.5
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
ECEC2DB821DJ ECEC2DB821EJ ECEC2DB102CJ ECEC2DB102DJ ECEC2DB102EJ ECEC2DB122DJ ECEC2DB122EJ ECEC2DB152DJ ECEC2DB152EJ ECEC2DB182EJ ECEC2DB222EJ ECEC2EB331CJ ECEC2EB391DJ ECEC2EB471BJ ECEC2EB471CJ ECEC2EB471DJ ECEC2EB561CJ ECEC2EB561EJ ECEC2EB681CJ ECEC2EB681DJ ECEC2EB681EJ ECEC2EB821DJ ECEC2EB821EJ ECEC2EB102DJ ECEC2EB102EJ ECEC2EB122EJ ECEC2EB152EJ ECEC2FB181CJ ECEC2FB221CJ ECEC2FB221DJ ECEC2FB271BJ ECEC2FB271CJ ECEC2FB271DJ ECEC2FB331CJ ECEC2FB331DJ ECEC2FB391CJ ECEC2FB391DJ ECEC2FB391EJ ECEC2FB471DJ ECEC2FB471EJ ECEC2FB561DJ ECEC2FB561EJ
200
1200 1500 1800 2200 330 390 470
30 35 30 35 35 35 25 30 22 25 30
560 680
25 35 25 30 35
250
820 1000 1200 1500 180 220 270
30 35 30 35 35 35 25 25 30 22 25 30
330 315 390
25 30 25 30 35
470 560
30 35 30 35
Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
EE145
Aluminum Electrolytic Capacitors/ HB
n Standard Products
W.V. (V) 315 Cap.
(±20%)
Case size
Dia. Length
Specification
Part No.
PET sleeve Terminal Length
Min.Packaging Q'ty
(µF) 680 820 120 150 180
(mm) 35 35 22 25 22 22 25 30
Ripple tan δ current (120Hz) (120Hz) (+105°C) (+20°C) (mm) (A)
4.0mm
(Without P.V.C.plate)
(pcs) 100 100 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100
45 50 30 25 35 40 30 25 45 35 45 30 25 50 40 30 45 30 50 45 50 30 30 25 35 30 40 30 25 45 35 30 45 30 25 50 35 30 45 35 50 40
1.7 2.0 0.75 0.75 0.82 0.90 0.90 0.90 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.3 1.3 1.4 1.5 1.7 0.64 0.69 0.69 0.75 0.75 0.82 0.82 0.82 0.95 0.95 0.95 1.1 1.1 1.1 1.2 1.2 1.2 1.35 1.35 1.55 1.55
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
ECEC2FB681EJ ECEC2FB821EJ ECEC2VB121BJ ECEC2VB121CJ ECEC2VB151BJ ECEC2VB181BJ ECEC2VB181CJ ECEC2VB181DJ ECEC2VB221BJ ECEC2VB221CJ ECEC2VB271CJ ECEC2VB271DJ ECEC2VB271EJ ECEC2VB331CJ ECEC2VB331DJ ECEC2VB331EJ ECEC2VB391DJ ECEC2VB391EJ ECEC2VB471DJ ECEC2VB561EJ ECEC2VB681EJ ECEC2GB820BJ ECEC2GB101BJ ECEC2GB101CJ ECEC2GB121BJ ECEC2GB121CJ ECEC2GB151BJ ECEC2GB151CJ ECEC2GB151DJ ECEC2GB181BJ ECEC2GB181CJ ECEC2GB181DJ ECEC2GB221CJ ECEC2GB221DJ ECEC2GB221EJ ECEC2GB271CJ ECEC2GB271DJ ECEC2GB271EJ ECEC2GB331DJ ECEC2GB331EJ ECEC2GB391DJ ECEC2GB391EJ
220 270 350 330
22 25 25 30 35 25 30 35
390 470 560 680 82 100 120 150
30 35 30 35 35 22 22 25 22 25 22 25 30
180 400 220
22 25 30 25 30 35
270
25 30 35
330 390
30 35 30 35
Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
EE146
Aluminum Electrolytic Capacitors/ HB
n Standard Products
W.V. (V) 400 Cap.
(±20%)
Case size
Dia.
Specification
Part No.
PET Sleeve Terminal Length
(Without P.V.C.plate)
Min.Packaging Q'ty
(µF) 470 560 82 100 120 150
(mm) 35 35 22 22 25 22 25 22 25 30
Ripple Length current tan δ (120Hz) (120Hz) (+105°C) (+20°C) (mm) (A)
4.0mm
(pcs) 100 100 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 100
45 50 30 35 30 40 35 50 40 30 45 35 50 40 45 35 50 40 45 50
1.75 1.80 0.56 0.64 0.64 0.72 0.72 0.79 0.79 0.79 0.87 0.87 1.00 1.00 1.19 1.19 1.38 1.38 1.55 1.74
0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20
ECEC2GB471EJ ECEC2GB561EJ ECEC2WB820BJ ECEC2WB101BJ ECEC2WB101CJ ECEC2WB121BJ ECEC2WB121CJ ECEC2WB151BJ ECEC2WB151CJ ECEC2WB151DJ ECEC2WB181CJ ECEC2WB181DJ ECEC2WB221CJ ECEC2WB221DJ ECEC2WB271DJ ECEC2WB271EJ ECEC2WB331DJ ECEC2WB331EJ ECEC2WB391EJ ECEC2WB471EJ
450
180 220 270 330 390 470
25 30 25 30 30 35 30 35 35 35
Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.)
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006
EE147
很抱歉,暂时无法提供与“ECEC2VB121BJ”相匹配的价格&库存,您可以联系我们找货
免费人工找货