ECKT3D331KB

High Voltage Ceramic Capacitors (SMD) High Voltage Ceramic Capacitors For Surface Mounting 1 to 5 kVDC ● Resin molded SMD type for reflow solderings ● High reliability through use of disc capacitor element ● Wide rated voltage ranges from 1 kV to 5 kV, through a disc element which withstand high voltage and outcurve terminals ● Wide rated voltage range 1 to 5 kV ■ Features ■ Recommended Application ● Ballast circuit of LCD backlighting inverter (For 3 to 5 kVDC Char.SL/GP) ● Snubber circuit of switching power supply (For 1 to 2 kVDC Char.B/Y5P) ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C C T 3 F 4 7 0 J G Product Code Code Class ECC Class1 ECK Class2 Packaging Style Code Style T Taped type Rated Voltage Code Rated Voltage 1 kVDC 3A 2 kVDC 3D 3 kVDC 3F 4 kVDC 3G 5 kVDC 3H Nominal Capacitance Ex. Capacitance 100 10 pF 470 47 pF 101 100 pF 221 220 pF Cap. Tolerance Code Tol. D ±0.5 pF J ±5 % K ±10 % M ±20 % Temp. Char. Code Temp. Char. G SL/GP B B/Y5P Suffix Code Style code Nil 1 M 2 2 3 Y 4 ■ Construction ● Inside Terminal ■ Dimensions in mm (not to scale) ● style 1, 3 Electrode Molded Resin S L S E W Terminal Ceramic Element A B ● Outside Terminal ● style 2, 4 L This Figure applied to Style Code 2, 4 (Add dim.L1) Electrode Molded Resin L1 Symbol Style 1 Ceramic Element Terminal Dim (mm) Style 2 Style 3 Style 4 L1 — — L W H S — — E A B 7.1±0.5 6.3±0.3 2.5±0.3 1.45±0.30 2.5±0.2 (2.0) (3.7) 2.5±0.2 (2.0) (3.7) 2.5±0.2 (1.7) (3.1) 5.7±0.5 4.5±0.3 2.3max. 0.85±0.30 2.5±0.2 (1.7) (3.1) 10.8±0.5 6.8±0.5 6.3±0.3 2.5±0.3 9.4±0.3 5.5±0.5 4.5±0.3 2.3±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. H Dec. 2007 High Voltage Ceramic Capacitors (SMD) ■ Specifications Characteristics Operating Temperature Range Rated Voltage Dielectric Withstanding Voltage Capacitance Q or Dissipation Factor (tan δ) Insulation Resistance Temperature Characteristics Char. B/Y5P –25 to 105 °C 2 to 3 kVDC 4 to 5 kVDC 5 kVDC 1 to 2 kVDC 200 % of Rated Voltage 150 % of Rated Voltage 120 % of Rated Voltage 200 % of Rated Voltage for 1 to 5 seconds for 1 to 5 seconds for 1 to 5 seconds for 1 to 5 seconds Within the specified tolerance, when measured Within the specified tolerance, when measured at 1 MHz±20 %, 1 to 5 Vrms. and 20 °C at 1 kHz±20 %, 1 to 5 Vrms. and 20 °C 30 pF or under Q > 400+20 C (C:Cap.pF) tan δ < 0.025 over 30 pF Q > 1000 at 1 kHz±20 %,1 to 5 Vrms. and 20 °C at 1 MHz±20 %,1 to 5 Vrms. and 20 °C 10000 M min. at 500 VDC and 1 minute electrification Temperature Coefficient: Max. Cap. Change:±10 % +350 to –1000 ppm/ °C (Temperature Range : –25 to 85 °C) (Temperature Range : 20 to 85 °C) Char. SL/GP ■ Packaging Methods (Taping) Type 1 to 5 kVDC (style 1) 5 kVDC (style 2) 4 kVDC (style 3) 5 kVDC (style 4) ● Reel Packaging Style Embossed Carrier Taping Embossed Carrier Taping Embossed Carrier Taping Embossed Carrier Taping ● Minimum Quantity/Packing Unit Part Number EC T3 ECCT3H ECCT3G ECCT3H M JG2 Y 5 to 470 pF 5 to 27 pF 10 to 27 pF 5 to 15 pF Minimum Packing Packing Quantity Carton Dimensions in Carton Quantity in mm L W H 2000 pcs./reel 2000 pcs./reel 3000 pcs./reel 3000 pcs./reel 6000 pcs. 4000 pcs. 9000 pcs. 6000 pcs. 350 350 62 350 350 62 350 350 62 350 350 62 ● Embossed Carrier Taping style 1, 3, 4 (W=12 mm) E C A B F W P1 Tape running direction Chip pocket E Tape running direction Unit:(mm) –0 –0 –0 t1 Feeding hole φD0 Chip pocket E F W P1 Dec. 2007 P2 P0 r D t2 Chip component B style 2 A W t t1 Feeding hole φD0 A B P2 P0 t2 Unit:(mm) Chip component Symbol style 1, 3 Dim. (mm) style 2 style 4 A B C D E 330±5 60 min. 13.0±0.5 21.0±1.0 2.0±0.5 W t r 13.5±1.5 25.5±1.5 2.0±0.5 R1.0 17.5±1.5 Symbol P0 φD0 t1 t2 1.5 0.3 3.2 6.5 7.5 5.5 1.75 8.0 2.0 4.0 style1 ±0.2 ±0.2 12.0 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1 +0.1 ±0.1 ±0.3 ±0.3 A B W F E P1 P2 6.65 1.75 2.0 4.0 1.5 0.3 3.2 style2 ±0.20 11.2 24.0 11.5 ±0.10 12.0 ±0.1 ±0.1 +0.1 ±0.1 ±0.3 ±0.2 ±0.3 ±0.1 ±0.1 4.8 6.0 5.5 1.75 8.0 2.0 4.0 1.5 0.3 2.8 style3 ±0.2 ±0.2 12.0 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1 +0.1 ±0.1 ±0.3 ±0.3 4.7 7.5 1.75 8.0 2.0 4.0 1.5 0.3 2.85 style4 ±0.2 10.0 16.0 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1 +0.1 ±0.1 ±0.30 ±0.5 ±0.3 –0 Dim. (mm) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. High Voltage Ceramic Capacitors (SMD) ● Leader Part and Taped End Not loaded 40 mm min. Chip component position Not loaded 20 mm min. Leader tape 400 mm min. ■ Ratings and Characteristics ● Rated Voltage 1 to 5 kVDC Rated Voltage Part Number ECCT3H050DGM ECCT3H100JGM ECCT3H120JGM ECCT3H150JGM ECCT3H180JGM ECCT3H220JGM ECCT3H270JGM ECCT3H050DGY ECCT3H080DGY ECCT3H100JGY ECCT3H120JGY ECCT3H150JGY ECCT3G100DG2 ECCT3G120JG2 ECCT3G150JG2 ECCT3G180JG2 ECCT3G220JG2 ECCT3G270JG2 ECCT3G330JG ECCT3G390JG ECCT3G470JG ECCT3F100DG2 ECCT3F120JG2 ECCT3F150JG2 ECCT3F180JG2 ECCT3F220JG2 ECCT3F270JG2 ECCT3F330JG2 ECCT3F390JG ECCT3F470JG ECCT3F560JG ECCT3D680JG ECKT3D101KB ECKT3D121KB ECKT3D151KB ECKT3D181KB ECKT3D221KB ECKT3D271KB ECKT3D331KB ECKT3A391KB ECKT3A471KB Capacitance (pF) 5 10 12 15 18 22 27 5 8 10 12 15 10 12 15 18 22 27 33 39 47 10 12 15 18 22 27 33 39 47 56 68 100 120 150 180 220 270 330 390 470 Cap. Tolerance (%) ±0.5 pF ±5 ±5 ±5 ±5 ±5 ±5 ±0.5 pF ±0.5 pF ±5 ±5 ±5 ±0.5 pF ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±0.5 pF ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 Temp. Char SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP SL/GP B/Y5P B/Y5P B/Y5P B/Y5P B/Y5P B/Y5P B/Y5P B/Y5P B/Y5P Style Style 2 5 kVDC Style 4 Style 3 4 kVDC Style 1 Style 3 3 kVDC 2 kVDC Style 1 1 kVDC Notes ✽ This part number indicates taped type. ✽ Capacitance 9 pF or under is available by special order. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Sep. 2006 High Voltage Ceramic Capacitors (SMD) ■ Typical Characteristics Char. SL/GP (Temp.Coeff.:+350 to –1000 ppm/°C) Capacitance Change (%) Capacitance Change (%) ● Temperature Characteristics ( +10 0 – 10 Char. B/Y5P Temp.Range:–25 to 85 °C max.Cap.Change:±10 % ) +10 +5 0 –5 –10 –15 –20 0 20 40 60 Temperature (˚C) 80 100 120 –20 0 20 40 60 Temperature (˚C) 80 100 ● Characteristics of Voltage-Frequency Rated Voltage 3 kVDC 5000 3000 Voltage (Vp-p) Voltage (Vp-p) Rated Voltage 4 kVDC 5000 3000 Voltage (Vp-p) Rated Voltage 5 kVDC 5000 3000 2000 1000 700 500 300 200 10pF 22pF 2000 1000 700 500 47pF 300 200 10pF 22pF 33pF 2000 1000 700 500 300 200 10pF 22pF 33pF 47pF 10 20 30 200 300 500 50 70 100 Frequency (kHZ) 10 20 30 200 300 500 50 70 100 Frequency (kHZ) 10 20 30 200 300 500 50 70 100 Frequency (kHZ) The graphs above show the maximum permissable voltage when using a capacitor with an AC sine wave voltage. When measuring this voltage in room temperature (25 °C), the capacitor self-heat generation will rise a maximum of 20 °C. When using a pulse voltage or an AC voltage other than a sine wave, confirm that the capacitor self-heat generation is less than 20 °C in an ambient room temperature of 25 °C. The self-heat generation temperature is the difference between the surface temperature and the ambient room temperature. As for the situation when the self-heat generation temperature is more than 25 °C, refer to the figure on the right. Permission self generation of heat temperature vs. ambient temperature 25 Permission self generation of heat temperature (˚C) 20 15 10 5 0 20 40 60 80 100 120 ■ Application Examples ambient temperature (˚C) ● LCD Backlighting Inverter 3 to 5 kV, 10 to 47 pF ● Primary circuit and Snubber circuit of Switching Power Supply 1kV/2kV,100 to 470 pF Type BC or Type FC 1000 to 4700 pF Lamp AC In put DC Out put 2kV,100 to 330 pF Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006