ECWU1272JX5

Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type: ECWU(X) Stacked metallized PEN film as dielectric with simple mold-less construction I Features • Small in size (minimum size 3.2 mm ✕ 1.6 mm) • 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours • For reflow soldering • RoHS directive compliant I Recommended Applications • General purpose (Coupling, By-pass) I Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E C W U 1 Capacitance J X 5 Suffix Tape width 8 mm Product code Dielectric & Rated voltage construction 1 Cap. Tol. Suffix 100 VDC J ±5 % 5 I Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions –55 ˚C to +105 ˚C 100 VDC 0.0010 µF to 0.010 µF (E12) ±5 % (J) Between terminals : Rated volt. (VDC)✕150 % 60 s tan IR=3000 MΩ (20 ˚C, 100 VDC, 60 s) Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface) (Please consult us for Reflow 250 ˚C max product.) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. I Construction I Dimensions in mm (not to scale) size code H2 H3 G2 G3 L 3.2 3.2 3.2 3.2 W 1.6 1.6 2.5 2.5 H 1.1 1.5 1.5 2.1 e 0.65 0.65 0.65 0.65 g > =1.0 > =1.0 > =1.0 > =1.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors I Taping Specification for Automatic Mounting Refer to the page of taping specifications. G Capacitance tolerance : ±5 % (J) Cap. (µF) I Rating, Dimensions & Quantity/Reel Rated volt. 100 VDC L W H 0.0010 ECWU1102JX5 3.2 1.6 1.1 H2 0.0012 ECWU1122JX5 3.2 1.6 1.1 H2 0.0015 ECWU1152JX5 3.2 1.6 1.1 H2 0.0018 ECWU1182JX5 3.2 1.6 1.1 H2 0.0022 ECWU1222JX5 3.2 1.6 1.1 H2 0.0027 ECWU1272JX5 3.2 1.6 1.1 H2 0.0033 ECWU1332JX5 3.2 1.6 1.5 H3 0.0039 ECWU1392JX5 3.2 1.6 1.5 H3 0.0047 ECWU1472JX5 3.2 1.6 1.5 H3 0.0056 ECWU1562JX5 3.2 2.5 1.5 G2 0.0068 ECWU1682JX5 3.2 2.5 1.5 G2 0.0082 ECWU1822JX5 3.2 2.5 2.1 G3 0.010 ECWU1103JX5 3.2 2.5 2.1 G3 > cap.=0.012 µF : Please use 100 VDC rating of ECWU(C) Part No. Dimensions (mm) Code Q'ty 3000 2000 I Recommened for Land Dimensions (mm) Size code Land dimensions for reflow soldering A B 3.6 3.6 C 1.4 2.3 H2,H3 G2,G3 1.8 1.8 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.