MAZ2130

This product complies with the RoHS Directive (EU 2002/95/EC). Zener Diodes MAZ2xxx Series (MA2xxx Series) Silicon planar type Unit: mm For stabilization of power supply ■ Features • High reliability, achieved by the combination the planar type and the glass seal • Large power dissipation PD • Wide voltage range: Zener voltage VZ = 5.1 V to 56.0 V 2.6–0.2 +0.4 Cathode 1st Band 2nd Band 3rd Band Anode ■ Absolute Maximum Ratings Ta = 25°C Parameter Repetitive peak forward current Power dissipation *1 Non-repetitive reverse surge power dissipation *2 Junction temperature Storage temperature Symbol IFRM PD PZSM Tj Tstg Rating 400 1.0 75 200 −55 to +200 Unit mA W W °C °C DO-41-A1 Package Note) *1: PD = 1.0 W achieved with a printed circuit board *2: t = 100 µs, Tj = 150°C ■ Common Electrical Characteristics Ta = 25°C ± 3°C *1 Parameter Forward voltage Zener voltage *2 Zener operating resistance Reverse current Temperature coefficient of zener voltage *3 Terminal capacitance Symbol VF VZ RZ IR SZ Ct Conditions IF = 200 mA IZ IZ VR IZ Specified value Specified value Specified value Specified value Refer to the list of the electrical characteristics within part numbers Min Typ Max 1.0 Unit V V Ω µA mV/°C pF VR = 0 V, f = 1 MHz Specified value Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) 2: VZ guaranteed 20 ms after current flow. * *3: Tj = 25°C to 150°C Note) The part number in the parenthesis shows conventional part number. Publication date: March 2004 SKE00002CED φ 0.8±00.5 27 min. Colored band indicatesVz classification 4.0±0.5 27 min. 1 This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series ■ Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C Zener voltage Part number IZ (mA) MAZ2051 MAZ2056 MAZ2062 MAZ2068 MAZ2075 MAZ2082 MAZ2091 MAZ2100 MAZ2110 MAZ2120 MAZ2130 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 MAZ2270 MAZ2300 MAZ2330 MAZ2360 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 VZ (V) Min 4.80 5.20 5.80 6.40 7.00 7.70 8.50 9.40 10.40 11.40 12.40 13.80 15.30 16.80 18.80 20.80 22.80 25.10 28.00 31.00 34.00 37.00 40.00 44.00 48.00 52.00 Max 5.40 6.00 6.60 7.20 7.90 8.70 9.60 10.60 11.60 12.70 14.10 15.60 17.10 19.10 21.20 23.30 25.60 28.90 32.00 35.00 38.00 41.00 46.00 50.00 54.00 60.00 Reverse current IR (µA) VR (V) Max 1 2 3 3 3 4 5 7 7 8 9 10 11 12 14 15 16 18 20 22 24 26 29 31 33 35 20 20 20 10 10 10 10 10 5 5 5 5 5 5 5 5 5 2 2 2 2 5 5 5 5 5 Zener operating resistance Temperature Terminal coefficient of capacitance Marking symbol zener voltage (Color indication) Ct (pF) SZ (mV/°C) (VR = 0 V) IZ f = 1 MHz (mA) Typ 1st. 2nd. 3rd. Typ RZ (Ω) IZ (mA) Max 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 8 6 6 5 5 6 6 8 8 10 12 12 15 15 20 20 25 25 30 30 50 50 50 50 50 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 0 1.5 2.4 3.1 3.8 4.5 5.4 6.3 7.4 8.4 9.4 11.4 12.5 14.5 16.6 18.6 20.7 23.8 26.9 30.0 33.4 36.3 41.1 44.9 48.6 54.9 200 180 330 280 250 230 220 200 160 160 155 150 135 110 110 95 90 85 80 75 70 65 60 55 50 45 Green Brown Green Blue Blue Red Blue Gray Purple Green Gray Red White Brown Brown Black Brown Brown Brown Red Brown Orange Brown Green Brown Blue Brown Gray Red Black Red Red Red Yellow Red Purple Orange Black Orange Orange Orange Blue Orange White Yellow Orange Yellow Purple Green Brown Green Blue Brown Blue Red Gray Green Red Brown                    PD  Ta 1.6 2 mm l l 1.6 PD  Ta 104 PZSM  tW Non-repetitive reverse surge power dissipation PZSM (W) l PZSM tW Non repetitive 103 l Power dissipation PD (W) 1.2 Power dissipation PD (W) 25 mm φ 4 mm 1.2 0.8 l = 20 mm 0.8 l = 27 mm 102 0.4 10 mm 0.4 20 mm Tj = 25°C 10 0 0 40 80 120 160 200 240 0 0 40 80 120 160 200 240 1 10−1 1 10 102 Ambient temperature Ta (°C) Ambient temperature Ta (°C) Pulse width tW (ms) 2 SKE00002CED This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series IZ  V Z 240 Ta = 25°C Static Characteristics MAZ2051 IZ  VZ 100 Ta = 25°C Static Characteristics 40 IZ  VZ Ta = 25°C Static Characteristics 200 80 MAZ2110 MAZ2120 MAZ2130 Zener current IZ (mA) Zener current IZ (mA) 160 MAZ2056 MAZ2062 MAZ2068 Zener current IZ (mA) 30 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 60 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 120 MAZ2075 MAZ2082 20 MAZ2100 80 MAZ2091 MAZ2270 MAZ2330 40 0 0 0 2 4 6 8 10 12 MAZ2360 40 20 MAZ2300 10 0 10 20 30 40 0 0 20 40 60 80 Zener voltage VZ (V) Zener voltage VZ (V) Zener voltage VZ (V) IZ  V Z 200 Tj = 25°C Dynamic Characteristics 160 80 100 IZ  VZ 100 Tj = 25°C Dynamic Characteristics 80 IZ  VZ Tj = 25°C Dynamic Characteristics Zener current IZ (mA) Zener current IZ (mA) Zener current IZ (mA) 120 MAZ2051 MAZ2056 MAZ2062 MAZ2068 60 MAZ2110 MAZ2120 MAZ2130 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 60 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 MAZ2075 MAZ2082 MAZ2091 MAZ2100 80 40 MAZ2240 MAZ2270 MAZ2300 MAZ2330 MAZ2360 40 40 20 20 0 0 2 4 6 8 10 12 0 0 10 20 30 40 0 0 20 40 60 80 Zener voltage VZ (V) Zener voltage VZ (V) Zener voltage VZ (V) Zth  tW 10 RZ  IZ 102 Ta = 25°C Transient thermal impedance Zth (°C / mW) Zener operating resistance RZ (Ω) Heat sink Thickness t = 1.6 mm Copper foil t = 0.035 mm Anode side φ 3 mm Cathode side φ 3 mm 1 Lead distance 5 mm Zth-a 10 10−1 Zth-m MAZ2200 MAZ2150 1 MAZ2091 MAZ2068 10−2 10−3 10−4 10−3 10−2 10−1 1 10 102 103 104 105 10−1 1 10 102 Pulse width tW (s) Zener current IZ (mA) SKE00002CED 3 This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series SZ  I Z Temperature coefficient of zener voltage SZ (mV / °C) 8 Tj = 25°C to 150°C MAZ2100 6 MAZ2091 4 MAZ2082 MAZ2075 2 MAZ2062 MAZ2056 0 MAZ2051 −2 −4 0 10 20 30 40 50 Zener current IZ (mA) 4 SKE00002CED This product complies with the RoHS Directive (EU 2002/95/EC). Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP