MAZY510

Zener Diodes MAZYxxx Series (MA1Zxxx Series) Silicon planar type Unit : mm For stabilization of power supply 2.5±0.3 2.15±0.3 2 ■ Features • Large power dissipation PD : 1 W • Zener voltage VZ: 4.7 V to 51 V • Zener voltage allowable deviation: 10% • Auto mounting possible 1 8˚ 8˚ 0.25+0.1 –0.05 ■ Absolute Maximum Ratings Ta = 25°C Parameter Repetitive peak forward current Power dissipation *1 Non-repetitive reverse surge power dissipation *2 Junction temperature Storage temperature Symbol IFRM PD PZSM Tj Tstg Rating 500 1.0 100 150 −40 to +150 Unit mA 1.4±0.2 W W °C °C 0 to 0.05 1: Anode 2: Cathode NMiniP2-J1 Package Note) *1: PD = 1.0 W achieved with a printed circuit board (alumina) t = 50 µs for the product of VZ ≤ 6.8 V *2: t = 100 µs, Tj = 150°C Marking Symbol Refer to the list of the electrical characteristics within part numbers (Example) MAZY047: 4.7 ■ Common Electrical Characteristics Ta = 25°C ± 3°C *1 Parameter Forward voltage Zener voltage *2 Zener operating resistance Reverse current Temperature coefficient of zener voltage *3 Symbol VF VZ RZ IR SZ Conditions IF = 200 mA IZ IZ VR IZ Specified value Specified value Specified value Specified value Refer to the list of the electrical characteristics within part numbers Min Typ Max 1.2 Unit V V Ω µA mV/°C Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) 2: VZ guaranteed 20 ms after current flow. * *3: Tj = 25°C to 150°C Note) The part number in the parenthesis shows conventional part number. Publication date: March 2004 SKE00014CED 1.2±0.4 5.0+0.4 –0.1 4.4±0.3 1.2±0.4 1 MAZYxxx Series ■ Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C Zener voltage Part number Min MAZY047 MAZY051 MAZY056 MAZY062 MAZY068 MAZY075 MAZY082 MAZY091 MAZY100 MAZY110 MAZY120 MAZY130 MAZY150 MAZY160 MAZY180 MAZY200 MAZY220 MAZY240 MAZY270 MAZY300 MAZY330 MAZY360 MAZY390 MAZY430 MAZY470 MAZY510 4.4 4.8 5.2 5.6 6.2 6.8 7.4 8.2 9.0 9.9 10.8 11.7 13.5 14.4 16.2 18.0 19.8 21.6 24.3 27.0 29.7 32.4 35.1 38.7 42.3 45.9 VZ (V) Nom 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 Max 5.0 5.4 6.0 6.8 7.4 8.3 9.1 10.1 11.0 12.1 13.2 14.3 16.5 17.6 19.8 22.0 24.2 26.4 29.7 33.0 36.3 39.6 42.9 47.3 51.7 56.1 IZ (mA) 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 Reverse current IR (µA) VR (V) Max 40 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1.0 1.0 2.0 3.0 3.0 3.0 4.0 5.0 7.0 7.0 8.0 9.0 10.0 11.0 13.0 14.0 16.0 17.0 19.0 21.0 26.4 28.8 31.8 35.8 37.6 40.8 Zener operating resistance RZ (Ω) Max 60 50 40 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 65 65 65 65 IZ (mA) 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 Temperature coefficient of zener voltage SZ (mV/°C) IZ (mA) Typ 0 0 1.5 2.4 3.1 3.8 4.5 5.4 6.3 7.4 8.4 9.4 11.4 12.5 14.5 16.6 18.6 20.7 23.8 26.9 30.0 33.4 36.3 41.1 44.9 48.6 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 Marking symbol 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 2 SKE00014CED MAZYxxx Series PD  Ta 1.5 Heat sink: Alumina board Copper foil 2.0 mm × 2.0 mm 10 102 Ta = 25°C I Z  VZ 102 I Z  VZ Ta = 25°C 10 Power dissipation PD (W) 1.0 Zener current IZ (mA) Zener current IZ (mA) 1 1 MAZY082 MAZY091 10−1 MAZY056 MAZY062 MAZY068 MAZY075 10−1 MAZY110 MAZY120 MAZY130 MAZY150 MAZY160 18 10−2 MAZY047 MAZY051 10−2 0 10−3 10−3 4 6 8 10 12 0 40 80 120 160 200 240 0 2 12 14 16 MAZY180 20 0.5 MAZY100 22 Ambient temperature Ta (°C) Zener voltage VZ (V) Zener voltage VZ (V) IZ  V Z 102 Ta = 25°C I Z  VZ Temperature coefficient of zener voltage SZ (% / °C) 102 0.12 0.10 0.08 0.06 0.04 0.02 0 SZ  VZ 60 50 40 mV / °C 30 20 10 0 −10 −20 60 10 10 % / °C Zener current IZ (mA) Zener current IZ (mA) 1 1 MAZY200 MAZY220 MAZY240 MAZY270 MAZY300 MAZY330 MAZY360 10−1 10−1 MAZY390 MAZY430 MAZY470 10−2 10−2 MAZY510 −0.02 −0.04 10−3 10−3 24 28 32 36 40 44 Ta = 25°C 44 48 52 56 60 64 0 10 20 30 40 50 Zener voltage VZ (V) Zener voltage VZ (V) Zener voltage VZ (V) Rth  t 1 Heat sink: Alumina board Copper foil 2 mm × 2 mm Thermal resistance Rth (°C / mW) Without heat sink 10−1 With head sink 10−2 10−1 1 10 102 103 Time t (s) SKE00014CED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP