PAN1316

Product Introduction NEW! PAN1326/1316 SERIES BLUETOOTH® LOW ENERGY RF MODULES New NProduct ew Introduction Dual-Mode Wireless Bluetooth Connectivity and Bluetooth Low Energy Introducing Panasonic’s latest breakthrough in wireless networking, the NEW PAN1326/1316 Series RF Modules featuring both Bluetooth Low Energy and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications. The Bluetooth Low Energy (BLE) standard is designed to reduce power consumption by establishing very fast connections (few ms) and transferring P small amounts of data. Using these techniques, energy consumption is reduced i to a tenth of Classic Bluetooth. Bluetooth Low Energy devices can be put into a Cut the Cable sleep mode and activated for event activities such as sending files to a gateway, PC or mobile phone. Furthermore, the maximum power consumption is less Bluetooth-Module than 15 mA and the average power consumption is about 1 uA. Thus, a small PAN1450 coin cell – such as a CR2032 – is capable of powering a device for up to 10 years of operation. The NEW PAN1326/1316 Host Controlled Interface (HCI) Series also brings The PAN1450 provides interface per the BT 1.2 Texas Instrument’s CC2564, to an easy-to-use module format. Panasonic’s tinywireless BT compliance testing have specification. Interoperability and been completed 2 including antenna.for the BT Chip ZV4301 from Zeevo, Inc. to footprint technology offers a module of only 85.5 mm The facilate rapid time-to-market. The BT Chip incorporates a widely popular 32-bit ARM7TDMI modules are designed to accommodate PCBs pad pitch of 1.3mmCPU core with sufficient bandwidth to support a wide range of and as little embedded µController applications and the module provides as two layers for easy implementation and manufacture. full ARM7 software development access. OUTLINES - ENW89803J TM TM Product Performance: The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³ SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. NEW Bluetooth Low Energy ODULES • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking) • Fully Qualified Bluetooth v4.0 EDR • Dimensions PAN1326: 9mm x 9.5mm x 1.8mm (width x length x height) • Dimensions PAN1316: 6.5mm x 9mm x 1.7mm (width x length x height) • Certifications: Bluetooth, FCC, IC and CE • Operating Temperature Range: -20ºC to +70ºC IRELESS M BLUET PAN1326 and PAN1316 Part Numbers: Part Numbers ENW-89823A2JF ENW-89823C2JF Description PAN1326, CC2564, Bluetooth & Bluetooth Low Energy, HCI module, antenna PAN1316, CC2564, Bluetooth & Bluetooth Low Energy, HCI module, no antenna Development and Evaluation Part Numbers: Part Numbers ENW-89825A2JF EVAL_PAN1323 Description PAN1323ETU, Development Module for PAN1315, PAN1316, PAN1317, PAN1325, PAN1326, PAN1327 EVAL_PAN1323, Development Kit for PAN1315, PAN1316, PAN1317, PAN1325, PAN1326, PAN1327 W • • • • FEATURES Supply Voltage Range: 1.7 - 4.8V Overview Profiles:results with RSSI (1.2) and AVRCP SPP, A2DP - Inquiry - Adaptive frequency hopping (AFH) Based throughput (>600 kbps) enabled (1.2) upon TI’s CC2564 - High - Hold-, ParkIntegrates and Sniffmode ultra low-power MSP430 with TI’s - Up to 128 bit encryption - Audio capability on an SCO microprocessor channel- sleep and deep sleep - Support for very low power modes • VeryAll bluetooth data rates (up to 57,6/723,2Kbps) ACL and eSCO fast algorithm for both User Interfaces • Supports USB version 2.0 compliant Extended Range Tx power with 10dBm - Full-speed - Programmable baud typical output rate UART (9,6 Kbps - 921,6 Kbps) - Debug UART (DUART) Purpose I/O‘s • Low 16 General (1 channel) (interruptible) for page and inquiry scans power scan method - PCM audio - SPI and at 1/3rd JTAG interface power normal Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port TH QUAL OO IF I ED B01839 PR ODUCT Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1326NPI Rev. 1.0, FY11-075-XXX Product Introduction Interfaces: The PAN1326/PAN1316 Host Controlled Interface supports several transport layers with the following features: • UART Rates of up to 4Mbps • Three and Four Wire UART Transport New NProduct ew Introduction Block Diagram PAN1326: Applications: • Sports and Fitness • Heart Rate Monitor • Blood Pressure Sensor • Blood Glucose Meter • Thermometer • Assisted Living • Flood Alarm • Heating Control • Automatic Key Control Series PAN1315 PAN1316 PAN1317 PAN1325 PAN1326 PAN1327 Description BT Classic BT and BLE Dual Mode BT and ANT BT Classic with antenna BT and BLE with antenna • • • • • Industrial Sensors Toys Entertainment Devices Mobile Accessories All Bluetooth Wireless Applications Block Diagram PAN1316: Compatibility 100% Pin Compatible Bluetooth Module Pin Compatibility: 100% Pin Compatible Dual Mode BT and ANT with antenna All Panasonic Bluetooth RF Modules are 100% pin compatible with the next generation of Bluetooth Classic and Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic, Low Energy and ANT enabled modules, addressing larger markets and providing migration paths to circumvent obsolescence. Technical Specifications for PAN1326 and PAN1316: Parameter Receiver Sensitivity (BER=10-3) Output Power Power Supply Ultra Low Power Scan GFSK DH1\DH5 Operating Temperature Range Value -93 dBm 10 dBm 1.7 - 4.8 V 135 uA 33 mA -20°C to + 70°C Condition / Notes GFSK, Typical, Dirty TX On VDD_In = VBAT Battery or DC/DC 1.28s Interval Full Throughput -40°C to + 85°C Optional www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1326NPI Rev. 1.0, FY11-075-XXX