PAN1325

Product Introduction P Cut the Cable NEW! PAN1323ETU BLUETOOTH® Development Module i TM New Product New Introduction Bluetooth-Module PAN1450 PAN1323ETU Triple Mode Simplifies the Development Environment One development module, three standards: Bluetooth Classic, Bluetooth Low Energy and ANT™ . This unique triple mode ETU – that’s ETU for “Easy-To-Use” – module plugs directly into Panasonic development kits, Texas Instruments MSP430 and Stellaris experimenter boards with the added benefit of header connectors that simplify prototype wiring and field trials. The PAN1323ETU is the development environment for the PAN13xx family*. This family is based upon Texas Instrument’s CC256x integrated circuits and uses a host controlled interface ( HCI), a cost effective and flexible means to implement a Bluetooth network. HCI reduces BOM cost by eliminating redundant processing capacity and giving designers the flexibility to work with a controller of their choosing, as the Bluetooth stack resides and executes on the application’s host processor. OUTLINES - ENW89803J The PAN1450 provides wireless interface per the BT 1.2 specification. Interoperability and BT compliance testing have been completed for the BT Chip ZV4301 from Zeevo, Inc. to facilate rapid time-to-market. TM The BT Chip incorporates a widely popular 32-bit ARM7TDMI CPU core with sufficient bandwidth to support a wide range of embedded µController applications and the module provides full ARM7 software development access. The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³ SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. ODULES Bluetooth Low Energy and ANT are ultra-low power network standards. The foundations of Bluetooth Low Energy User Interfaces power consumption are short messages and establishing very fast connections -(few ms). Using these techniques, Full-speed USB version 2.0 compliant - Programmable baud rate UART (9,6 Kbps - 921,6 Kbps) energy consumption is reduced to a tenth of a Classic Bluetooth network. ANT is -a wireless sensor network protocol Debug UART (DUART) - 16 General Purpose I/O‘s operating in the 2.4 GHz spectrum, designed for ease of use, efficiency and scalability, (1 channel) (interruptible)peer-to-peer, - PCM audio ANT supports - SPI and JTAG interface star, tree and fixed mesh topologies. H QUA M BLUET W IRELESS FEATURES Overview - Inquiry results with RSSI (1.2) - Adaptive frequency hopping (AFH) enabled (1.2) - High throughput (>600 kbps) - Hold-, Park- and Sniffmode - Up to 128 bit encryption - Audio capability on an SCO channel - Support for very low power modes - sleep and deep sleep - All bluetooth data rates (up to 57,6/723,2Kbps) Product Performance: • The PAN1323ETU is the development tool for Panasonic’s entire PAN13xx product line.* • A single development module for three standards: Bluetooth Classic, Bluetooth Low Energy and ANT. - Bluetooth version 4.0 - ANT is a wireless sensor network protocol designed for ultra-low power applications - Bluetooth Low Energy average power consumption is about 1 uA. • Cost effective and flexible HCI interface • Easily integrates to Texas Instruments’ MSP430 and Stellaris ARM7 controllers • Extraordinary range with 10 dbm of Tx power PAN1323ETU Triple Mode Compatibility: B01839 PR Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port T OO L ODUCT IF I ED Series Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A Antenna X Bluetooth X X X X LE X ANT X Compatibility - PAN1323ETU PAN1315 PAN1316 PAN1317 PAN1325 PAN1326 PAN1327 X X 100% X X X X X X X X 100% PAN1323ETU Part Numbers: Part Numbers ENW-89825A2JF Description PAN1323ETU, Evaluation Module * References in this document are restricted to TI CC256x based modules and do not include the PAN1321 www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1323ETUNPI, FY11-042-XXX Product Introduction Applications: • Sports and Fitness • Heart Rate Monitor • Blood Pressure Sensor • Blood Glucose Meter • Thermometer • Assisted Living • Flood Alarm • Heating Control • Automatic Key Control • Thermometer • • • • • Industrial Sensors Toys Entertainment Devices Mobile Accessories All Bluetooth Wireless Applications New Product New Introduction Block Diagram PAN1323ETU: Technical Specifications for PAN1323ETU: Parameter Receiver Sensitivity (BER=10-3) Output Power Power Supply Ultra Low Power Scan GFSK DH1\DH5 Operating Temperature Range Value -93 dBm 10 dBm 1.7 - 4.8 V 135 uA 33 mA -20°C to + 70°C Condition / Notes GFSK, Typical, Dirty TX On VDD_In = VBAT Battery or DC/DC 1.28s Interval Full Throughput -40°C to + 85°C Optional www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1323ETUNPI, FY11-042-XXX