PV14-P47B-3K

ELECTRICAL SOLUTIONS A. System Overview Pin Terminals, Vinyl Insulated – Funnel Entry Type PV-PB B1. Cable Ties B2. Cable Accessories • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Solid pin designed to prevent damage to the wire from over tightening, resulting in a reliable electrical connection • For use with pin-type terminal blocks • Insulation support helps to prevent wire damage in bending applications • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • UL rated up to 600 V per UL 486A/B L W B3. Stainless Steel Ties P C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Part Number PV18-P47B-3K PV14-P47B-3K Wire Range 22 – 18 AWG 16 – 14 AWG Figure Dimensions (In.) Max. Ins. (In.) 0.150 0.170 Color Code Red Blue L 0.90 0.90 W 0.07 0.07 CA9 Series Crimp Die CD9-1A CD9-2A P 0.49 0.49 CA-800/EZ Series Crimp Die CD-800-1 CD-800-2 Pieces Per Reel 3000 3000 For applicator information, see page D1.143. Male Blade Adapters, Vinyl Insulated – Funnel Entry Type DV-MB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Flat blade design to prevent damage to the wire from over tightening, resulting in a reliable electrical connection • For use with blade-type terminal blocks • Insulation support helps to prevent wire damage in bending applications • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • Rated up to 600 V L D1. Terminals Y D2. Power Connectors D3. Grounding Connectors Part Number DV18-145MB-3K DV14-145MB-3K Wire Range 22 – 18 AWG 16 – 14 AWG Max. Ins. (In.) 0.155 0.175 Color Code Red Blue Figure Dimensions (In.) L 0.90 0.90 Tab Size (In.) 0.145 x 0.032 0.145 x 0.032 Y 0.42 0.42 CA9 Series Crimp Die CD9-1A CD9-2A CA-800/EZ Series Crimp Die CD-800-1 CD-800-2 Pieces Per Reel 3000 3000 For applicator information, see page D1.143. Butt Splices Nylon Insulated and Premium Grade Nylon E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers Type BSN, BSP • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Designed to splice two solid or stranded wires together to repair or lengthen wires • Butted configuration provides low profile for limited space applications • Brazed seam protects terminal barrel from splitting during the crimp process • Internal wire stop assures proper length of insertion into terminal barrel • Premium grade nylon insulation available for applications requiring a tighter grip around the wire insulation for maximum strain relief • UL Flammability UL 94V-2/HB, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 486C L E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D1.130 Wire Part Number Range 22 – 16 AWG BSN18-3K 18 – 14 AWG BSN14-3K BSN10-2K 12 – 10 AWG BSP18-3K 22 – 16 AWG BSP14-3K 18 – 14 AWG For applicator information, see page D1.143. Color Code Red Blue Yellow Red Blue Max. Ins. (In.) 0.150 0.170 0.230 0.150 0.170 Order number of pieces required, in multiples of Standard Package Quantity. Figure Dimensions (In.) L 0.95 0.95 0.95 0.96 0.96 CA9 Series Crimp Die CD9-1A CD9-2A CD9-17B CD9-1A CD9-2A CA-800/EZ Series Crimp Die CD-800-1 CD-800-2 CD-800-17 CD-800-1 CD-800-2 Pieces Per Reel 3000 3000 2000 3000 3000 Prime items appear in BOLD.