BC807-25W-AU_R1_000A1

PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU Silicon PNP General Purpose Transistors -45V Voltage Current -500mA SOT-323 Unit: inch(mm) Features  Silicon PNP Epitaxial type  Excellent DC current gain characteristics  General purpose amplifier application  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 Standard  NPN complement: BC817W-AU series Mechanical Data  Case: SOT-323 Package  Terminals : Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0001 ounces, 0.005grams  Marking: BC807-16W-AU: 7S BC807-25W-AU: 7V BC807-40W-AU: 7W o Maximum Ratings and Thermal Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Collector-Base Voltage VCBO -50 V Collector-Emitter Voltage VCEO -45 V Emitter-Base Voltage VEBO -5 V Collector Current (DC) IC -500 mA Collector Current (Pulse) ICP -1000 mA Total Power Dissipation PTOT 300 mW TJ,TSTG -55~150 Operating Junction and Storage Temperature Range Thermal Resistance from Junction to Ambient (Note ) RθJA 420 o C o C/W Note: Mounted on minimum pad mount on FR-4 board. March 08,2019-REV.05 Page 1 PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU o Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS OFF Characteristics Collector-Emitter Breakdown Voltage BVCEO IC= -10mA, IB= 0A -45 - - V Collector-Base Breakdown Voltage BVCBO IC= -10uA, IE= 0A -50 - - V Emitter-Base Breakdown Voltage BVEBO IE= -1uA, IC= 0A -5 - - V VCB= -20V, IE= 0A - - -100 nA Collector-Base Cutoff Current ICBO o Collector-Base Cutoff Current ICBO Tj=125 C - - -5 uA Emitter-Base Cutoff Current IEBO VEB= -5V - - -100 nA 100 - 250 160 - 400 250 - 600 40 - - - - -0.7 V ON characteristics BC807-16W-AU DC Current Gain BC807-25W-AU BC807-40W-AU hFE DC Current Gain VCE= -1V IC= -100mA VCE= -1V IC= -500mA IC= -500mA, Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Turn-on voltage VBE(on) IC= -500mA, VCE= -1V - - -1.2 V fT IC= -10mA, VCE= -5V 100 - - MHz COB VCB= -10V, f=1MHz - 7 - pF Transition Frequency Collector Output Capacitance March 08,2019-REV.05 IB= -50mA Page 2 PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU TYPICAL CHARACTERISTIC CURVES Fig.1 DC Current Gain(-16) Fig.2 DC Current Gain (-25) Fig.3 DC Current Gain (-40) Fig.4 Collector-Emitter Saturation Voltage (-16) Fig.5 Collector-Emitter Saturation Voltage (-25) Fig.6 Collector-Emitter Saturation Voltage (-40) March 08,2019-REV.05 Page 3 PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU TYPICAL CHARACTERISTIC CURVES Fig.7 Base-Emitter Saturation Voltage (-16) Fig.8 Base-Emitter Saturation Voltage (-25) Fig.9 Base-Emitter Saturation Voltage (-40) Fig.10 Collector Current (-16) Fig.11 Collector Current (-25) Fig.12 Collector Current (-40) March 08,2019-REV.05 Page 4 PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU PART NO PACKING CODE VERSION Part No Packing Code Package Type Packing type Marking Version BC807-16W-AU_R1_000A1 SOT-323 3K pcs / 7” reel 7S Halogen free BC807-25W-AU_R1_000A1 SOT-323 3K pcs / 7” reel 7V Halogen free BC807-40W-AU_R1_000A1 SOT-323 3K pcs / 7” reel 7W Halogen free MOUNTING PAD LAYOUT March 08,2019-REV.05 Page 5 PBC807-16W-AU / BC807-25W-AU / BC807-40W-AU Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 08,2019-REV.05 Page 6