MMSZ5246A-AU_R1_000A1

MMSZ5229A-AU SERIES SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 4.3 to 51 Volt SOD-123 500 mWatt POWER Unit：inch(mm) FEATURES 0.154(3.90) 0.141(3.60) • Planar Die construction 0.110(2.80) 0.098(2.50) • 500mW Power Dissipation • Ideally Suited for Automated Assembly Processes • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) 0.028(0.70) 0.019(0.50) • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.071(1.80) 0.055(1.40) • AEC-Q101 qualified MECHANICAL DATA • Case: SOD-123, Molded Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 0.053(1.35) 0.037(0.95) 0.008(0.20)MAX. • Polarity: See Diagram Below • Apporx. Weight: 0.0004 ounces, 0.01 grams 0.005(0.12)MAX. 1 Cathode 0.016(0.40)MIN. 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Parameter Symbol Value Units Maximum Power Dissipation@TA=25OC (Notes A) PD 500 mW Operating Junction and StorageTemperature Range TJ -50 to +150 C O NOTES: A. Mounted on 5.0mm 2(0.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. April 27,2017-REV.02 PAGE . 1 MMSZ5229A-AU SERIES Nominal Zener Voltage Part Number V Z @ IZT Nom. V Max Reverse Leakage Current Max. Zener Impedance Z ZT @ I ZT I R @ VR Z ZK @ I ZK Mi n. V Ma x. V Ω mA Ω mA μA Marking Code V 500 mWatts Zener Diodes MMSZ5229A-AU 4.3 4.21 4.39 22 20.0 2000 0.25 5.0 1.0 D4 MMSZ5230A-AU 4.7 4.61 4.79 19 20.0 1900 0.25 5.0 2.0 D5 MMSZ5231A-AU 5.1 5.00 5.20 17 20.0 1600 0.25 5.0 2.0 E1 MMSZ5232A -AU 5.6 5.49 5.71 11 20.0 1600 0.25 5.0 3.0 E2 MMSZ5234A -AU 6.2 6.08 6.32 7 20.0 1000 0.25 5.0 4.0 E4 MMSZ5235A-AU 6.8 6.66 6.94 5 20.0 750 0.25 3.0 5.0 E5 MMSZ5236A -AU 7.5 7.35 7.65 6 20.0 500 0.25 3.0 6.0 F1 MMSZ5237A -AU 8.2 8.04 8.36 8 20.0 500 0.25 3.0 6.0 F2 MMSZ5238A -AU 8.7 8.53 8.87 8 20 600 0.25 3.0 6.5 F3 MMSZ5239A -AU 9.1 8.92 9.28 10 20.0 600 0.25 3.0 6.5 F4 MMSZ5240A -AU 10 9.80 10.20 17 20.0 600 0.25 3.0 8.0 F5 MMSZ5241A-AU 11 10.78 11.22 22 20.0 600 0.25 3.0 8.4 H1 MMSZ5242A -AU 12 11.76 12.24 30 20.0 600 0.25 2.0 9.1 H2 MMSZ5243A -AU 13 12.74 13.26 13 9.5 600 0.25 1.0 9.9 H3 MMSZ5244A -AU 14 13.72 14.28 15 9.0 600 0.25 0.5 10.5 H4 MMSZ5245A -AU 15 14.70 15.30 16 8.5 600 0.25 0.5 11.0 H5 MMSZ5246A-AU 16 15.68 16.32 17 7.8 600 0.25 0.1 12.0 J1 MMSZ5247A-AU 17 16.66 17.34 19 7.5 600 0.25 0.1 13.0 J2 MMSZ5248A -AU 18 17.64 18.36 21 7.0 600 0.25 0.1 14.0 J3 MMSZ5250A -AU 20 19.60 20.40 25 6.2 600 0.25 0.1 15.0 J5 MMSZ5251A-AU 22 21.56 22.44 29 5.6 600 0.25 0.1 17.0 K1 MMSZ5252A-AU 24 23.52 24.48 33 5.2 600 0.25 0.1 18.0 K2 MMSZ5254A-AU 27 26.46 27.54 41 5.0 600 0.25 0.1 21.0 K4 MMSZ5255A -AU 28 27.44 28.56 44 4.5 600 0.25 0.1 21.0 K5 MMSZ5256A -AU 30 29.40 30.60 49 4.2 600 0.25 0.1 23.0 M1 MMSZ5257A-AU 33 32.34 33.66 58 3.8 700 0.25 0.1 25.0 M2 MMSZ5258A-AU 36 35.28 36.72 70 3.4 700 0.25 0.1 27.0 M3 MMSZ5259A-AU 39 38.22 39.78 80 3.2 800 0.25 0.1 30.0 M4 MMSZ5260A-AU 43 42.14 43.86 93 3.0 900 0.25 0.1 33.0 M5 MMSZ5261A-AU 47 46.06 47.94 105 2.7 1000 0.25 0.1 36.0 N1 MMSZ5262A-AU 51 49.98 52.02 125 2.5 1100 0.25 0.1 39.0 N2 April 27,2017-REV.02 PAGE . 2 8 7 6 5 4 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 12 TEMPERATURE COEFFICIENT,(mV/ OC) TEMPERATURE COEFFICIENT,(mV/ OC) MMSZ5229A-AU SERIES 100 10 1 10 100 NOMINAL ZENER VOLTAGE ,VOLTS NOMINAL ZENER VOLTAGE ,VOLTS Fig.2 TEMPERATURE COEFFICIENTS Fig.1 TEMPERATURE COEFFICIENTS 1000 1000 FORWARD CURRENT ,mA LEAKAGE CURRENT , m A 100 10 1 O +150 C 0.1 0.01 O +25 C 0.001 0.0001 O -55 C 100 o 150 C 10 o 75 C o o 5C 0.7 0.8 25 C 0.00001 0 10 20 30 40 50 1 0.4 0.5 0.6 NORMAL ZENER VOLTAGE, VOLTS 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, VOLTS Fig.3 TYPICAL LEAKAGE CURRENT Fig.4 TYPICAL FORWARD VOLTAGE 1000 CAPACITANCE ,pF POWER DISSIPATION, Watts 0.5 O T A =25 C 0.4 0.3 TA=25 oC 0 V BIAS 1 V BIAS 0.6 100 BIASAT 50% OF VZ NOM 10 0.2 0.1 1 0 0 25 50 75 100 125 1 10 100 150 NORMAL ZENER VOLTAGE, VOLTS O T A ,TEMPERATURE ( C) Fig.5 STEADY STATE POWER DERATING April 27,2017-REV.02 Fig.6 TYPICAL CAPACITANCE PAGE . 3 MMSZ5229A-AU SERIES -1 MMSZ5230A MMSZ5235A ZENER CURRENT, Amperes ZENER CURRENT, Amperes 10 MMSZ5240A 10 -2 10 10 10 -3 -4 -5 0 2 4 6 8 10 12 ZENER VOLTAGE, VOLTS Fig.7 ZENER VOLTAGE VERSUS ZENER CURRENT April 27,2017-REV.02 10 0 10 -1 10 -2 10 -3 10 -4 10 -5 10 -6 10 -7 10 -8 MMSZ5245A MMSZ5250A MMSZ5256A 10 15 20 25 30 MMSZ5259A 35 40 45 ZENER VOLTAGE, VOLTS Fig.8 ZENER VOLTAGE VERSUS ZENER CURRENT PAGE . 4 MMSZ5229A-AU SERIES MOUNTING PAD LAYOUT Unit：inch(mm) SOD-123 0.167 (4.25) 0.038 (0.97) 0.048 (1.22) 0.091 (2.31) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7” plastic Reel April 27,2017-REV.02 PAGE . 5 MMSZ5229A-AU SERIES Part No_packing code_Version MMSZ5229A-AU_R1_000A1 MMSZ5229A-AU_R2_000A1 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 27,2017-REV.02 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 MMSZ5229A-AU SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 27,2017-REV.02 PAGE . 7