P6SMB20A-AU_R1_000A1

PP6SMB6.8A-AU ~ P6SMB82CA-AU Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 6.8~82 V Power SMB 600 W Features  ISO10605(C=330 pF,R=330Ω): ± 30kV Air, ± 30kV Contact  HBM ≧ ± 8 kV & CDM ≧ ± 2 kV  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMB  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0032 ounces, 0.092 grams o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) PPP Peak Forward Surge Currert(8.3 ms single half sine-wave) Peak Pulse Current on tp = 10 / 1000 us waveform ISO10605(C = 330 pF, R = 330 Ω) (Air) ISO10605(C = 330 pF, R = 330 Ω) (Contact) Typical Thermal Resistance Junction to Ambient Operating Junction Temperature Range Storage Temperature Range March 18,2019-REV.13 (Fig.2) (1) (2) IFSM IPPM (1) VESD RθJA (3) TJ TSTG LIMIT UNITS 600 W 100 A See table 1 A ±30 kV ±30 60 o C/W -55~150 o -55~150 o C C Page 1 PP6SMB6.8A-AU ~ P6SMB82CA-AU Series o Electrical Characteristics (TA = 25 C unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 600W Transient Voltage Suppressor P6SMB6.8A-AU P6SMB6.8CA-AU 5.8 6.45 7.14 10 1000 2000 10.5 57 EZB DZB P6SMB7.5A-AU P6SMB7.5CA-AU 6.4 7.13 7.88 10 500 1000 11.3 53 EZD DZD P6SMB8.2A-AU P6SMB8.2CA-AU 7.02 7.79 8.61 10 200 400 12.1 50 EZF DZF P6SMB9.1A-AU P6SMB9.1CA-AU 7.78 8.65 9.5 1 50 100 13.4 45 EZH DZH P6SMB10A-AU P6SMB10CA-AU 8.55 9.5 10.5 1 10 20 14.5 41 EZK DZK P6SMB11A-AU P6SMB11CA-AU 9.4 10.5 11.6 1 5 10 15.6 38 EZM DZM P6SMB12A-AU P6SMB12CA-AU 10.2 11.4 12.6 1 5 5 16.7 36 EZP DZP P6SMB13A-AU P6SMB13CA-AU 11.1 12.4 13.7 1 1 1 18.2 33 EZR DZR P6SMB15A-AU P6SMB15CA-AU 12.8 14.3 15.8 1 1 1 21.2 28 EZT DZT P6SMB16A-AU P6SMB16CA-AU 13.6 15.2 16.8 1 1 1 22.5 27 EZV DZV P6SMB18A-AU P6SMB18CA-AU 15.3 17.1 18.9 1 1 1 25.2 24 EZX DZX P6SMB20A-AU P6SMB20CA-AU 17.1 19 21 1 1 1 27.7 22 EZZ DZZ P6SMB22A-AU P6SMB22CA-AU 18.8 20.9 23.1 1 1 1 30.6 20 EXB DXB P6SMB24A-AU P6SMB24CA-AU 20.5 22.8 25.2 1 1 1 33.2 18 EXD DXD P6SMB27A-AU P6SMB27CA-AU 23.1 25.7 28.4 1 1 1 37.5 16 EXF DXF P6SMB30A-AU P6SMB30CA-AU 25.6 28.5 31.5 1 1 1 41.4 14.4 EXH DXH P6SMB33A-AU P6SMB33CA-AU 28.2 31.4 34.7 1 1 1 45.7 13.2 EXK DXK P6SMB36A-AU P6SMB36CA-AU 30.8 34.2 37.8 1 1 1 49.9 12 EXM DXM P6SMB39A-AU P6SMB39CA-AU 33.3 37.1 41 1 1 1 53.9 11.2 EXP DXP P6SMB43A-AU P6SMB43CA-AU 36.8 40.9 45.2 1 1 1 59.3 10.1 EXR DXR P6SMB47A-AU P6SMB47CA-AU 40.2 44.7 49.4 1 1 1 64.8 9.3 EXT DXT P6SMB51A-AU P6SMB51CA-AU 43.6 48.5 53.6 1 1 1 70.1 8.6 EXV DXV P6SMB56A-AU P6SMB56CA-AU 47.8 53.2 58.8 1 1 1 77 7.8 EXX DXX P6SMB62A-AU P6SMB62CA-AU 53 58.9 65.1 1 1 1 85 7.1 EXZ DXZ P6SMB68A-AU P6SMB68CA-AU 58.1 64.6 71.4 1 1 1 92 6.5 EYB DYB P6SMB75A-AU P6SMB75CA-AU 64.1 71.3 78.8 1 1 1 103 5.8 EYD DYD P6SMB82A-AU P6SMB82CA-AU 70.1 77.9 86.1 1 1 1 113 5.3 EYF DYF Note: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 5mm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, mini pad March 18,2019-REV.13 Page 2 PP6SMB6.8A-AU ~ P6SMB82CA-AU Series 10 Non-Repetive Pluse Waverform Shown in Figure 3 TA=25℃ 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 td - Pulse Width(us) Percent of IPP (%) 50% of IPP@1000us Rise time 10~90 %-10 us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform March 18,2019-REV.13 75 100 125 150 175 200 Fig.2 Derating Curve CJ - Junction Capacitance(pF) Fig.1 Pulse Power Rating Curve 110 100 90 80 70 60 50 40 30 20 10 0 50 TA - Ambient Temperature(°C) 4 10,000 Uni-direc onal VR=0V 1,000 100 Bi-direc onal VR=0V 10 1 1 10 100 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance Page 3 PP6SMB6.8A-AU ~ P6SMB82CA-AU Series Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version P6SMBxxxx-AU_R2_000A1 SMB 3K pcs / 13” reel See Table Halogen free Packaging Information & Mounting Pad Layout SMB Dimension March 18,2019-REV.13 Unit: inch(mm) SMB Pad Layout Unit: inch(mm) Page 4 PP6SMB6.8A-AU ~ P6SMB82CA-AU Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 18,2019-REV.13 Page 5