FR603

FAST RECOVER RECTIFIER FR601 THRU FR607 FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0Ampere R-6 .052(1.3) .048(1.2) 1.0(25.4) MIN. DIA. Low coat construction Fast switching for high efficency. Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension .360(9.1) .340(8.6) .360(9.1) .340(8.6) DIA. MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-O rate flame retardant Polarity: Color band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.042ounce, 1.19 grams 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at T A= 75℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25℃ TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR trr CJ RθJA TJ TSTG FR 601 50 35 50 FR 602 100 70 100 FR 603 200 140 200 FR 604 400 280 400 6.0 300 1.3 10 500 FR 605 600 420 600 FR 606 800 560 800 FR 607 1000 700 1000 UNITS Volts Volts Volts Amp Amps Volts µA Maximum Reverse Recovery Time (Note 3) T J=25℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range 150 150 10 (-55 to +150) (-55 to +150) 250 500 ns pF ℃/W ℃ ℃ Notes: 1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits. 2 Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted. 3.Reverse Recovery Test Conditions:If=0.5mA,Ir=1.0mA,Irr=0.25A Web Site: WWW.PS-PFS.COM FAST RECOVER RECTIFIER FR601 THRU FR607 VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0Ampere RATING AND CHRACTERISTIC CURVES FR601 THRU FR607 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 6.0 AVERAGE FORWARD CURRENT, 300 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tjmax 4.0 PEAK FORWARD SURGE 200 2.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm)Lead Length CURRENT, (A) (A) 100 1 Cycle 0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 80 100 AMBIENT TEMPERATURE, (° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, 100 10 T j =100° C INSTANTANEOUS REVERSE CURRENT, (uA) 1.0 (A) 10 Tj =25° C Pulse Width=300us 1% Duty Cycle 1.0 0.1 T j=25° C 0.01 0 20 40 60 80 100 120 140 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL THERMAL RESISTANCE VS LEAD LENGTH 70 1000 JUNCTION CAPACITANCE,(pF) THERMAL RESISTANCE, 60 (°C/W) 50 100 40 RθJL Single Lead to heat Sinl Insignificant Heat Flow Throrgh Other Lead 30 TJ=25° C F=1MHz Vsig=50mVp-p 20 10 10 0.1 1.0 10 100 Both Leads to Heat Sinl, Equal Length 0 0.8 0 0.2 0.4 0.6 1.0 REVERSE VOLTAGE,(V) （ EQUAL LEAD LENGTH TO HEAT SINK IN） Web Site: WWW.PS-PFS.COM