PDTD123T series
NPN 500 mA, 50 V resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
Rev. 02 — 21 July 2005 Product data sheet
1. Product profile
1.1 General description
500 mA NPN Resistor-Equipped Transistors (RET) family.
Table 1: Product overview Package Philips PDTD123TK PDTD123TS [1] PDTD123TT
[1]
Type number
PNP complement JEITA SC-59A SC-43A JEDEC TO-236 TO-92 TO-236AB PDTB123TK PDTB123TS PDTB123TT
SOT346 SOT54 SOT23
Also available in SOT54A and SOT54 variant packages (see Section 2).
1.2 Features
s Built-in bias resistors s Simplifies circuit design s 500 mA output current capability s Reduces component count s Reduces pick and place costs
1.3 Applications
s Digital application in automotive and industrial segments s Controlling IC inputs s Cost saving alternative for BC817 series in digital applications s Switching loads
1.4 Quick reference data
Table 2: Symbol VCEO IO R1 Quick reference data Parameter collector-emitter voltage output current bias resistor 1 (input) Conditions open base Min 1.54 Typ 2.2 Max 50 500 2.86 Unit V mA kΩ
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
2. Pinning information
Table 3: Pin SOT54 1 2 3 input (base) output (collector) GND (emitter)
1 2 3
001aab347 006aaa218
R1
Pinning Description Simplified outline Symbol
2
1
3
SOT54A 1 2 3 input (base) output (collector) GND (emitter)
1 2 3
001aab348 006aaa218
R1
2
1
3
SOT54 variant 1 2 3 input (base) output (collector) GND (emitter)
1 2 3
001aab447 006aaa218
R1
2
1
3
SOT23, SOT346 1 2 3 input (base) GND (emitter) output (collector)
1 1 2
006aaa144 sym012
3
R1
3
2
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
2 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
3. Ordering information
Table 4: Ordering information Package Name PDTD123TK PDTD123TS [1] PDTD123TT
[1]
Type number
Description plastic surface mounted package; 3 leads plastic single-ended leaded (through hole) package; 3 leads plastic surface mounted package; 3 leads
Version SOT346 SOT54 SOT23
SC-59A SC-43A -
Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9).
4. Marking
Table 5: Marking codes Marking code [1] E9 TD123TS *1T Type number PDTD123TK PDTD123TS PDTD123TT
[1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China
5. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO VI Parameter collector-base voltage collector-emitter voltage emitter-base voltage input voltage positive negative IO Ptot output current total power dissipation SOT346 SOT54 SOT23 Tstg Tj Tamb
[1]
Conditions open emitter open base open collector
Min -
Max 50 50 5 +12 −5 500 250 500 250 +150 150 +150
Unit V V V V V mA mW mW mW °C °C °C
Tamb ≤ 25 °C
[1]
−65 −65
storage temperature junction temperature ambient temperature
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
9397 750 15214
Product data sheet
Rev. 02 — 21 July 2005
3 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
6. Thermal characteristics
Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient SOT346 SOT54 SOT23
[1]
Conditions in free air
[1]
Min
Typ
Max
Unit
-
-
500 250 500
K/W K/W K/W
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol ICBO ICEO IEBO hFE VCEsat R1 Cc Parameter collector-base cut-off current collector-emitter cut-off current emitter-base cut-off current DC current gain collector-emitter saturation voltage bias resistor 1 (input) collector capacitance VCB = 10 V; IE = ie = 0 A; f = 1 MHz Conditions VCB = 40 V; IE = 0 A VCB = 50 V; IE = 0 A VCE = 50 V; IB = 0 A VEB = 5 V; IC = 0 A VCE = 5 V; IC = 50 mA IC = 50 mA; IB = 2.5 mA Min 100 1.54 Typ 300 2.2 7 Max 100 100 0.5 100 0.3 2.86 V kΩ pF Unit nA nA µA nA
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
4 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
103
006aaa447
10−1
006aaa448
hFE
(1) (2)
VCEsat (V)
(3)
(1) (2) (3)
102 10−1
1
10
102 IC (mA)
103
10−2 10−1
1
10
IC (mA)
102
VCE = 5 V (1) Tamb = 100 °C (2) Tamb = 25 °C (3) Tamb = −40 °C
IC/IB = 20 (1) Tamb = 100 °C (2) Tamb = 25 °C (3) Tamb = −40 °C
Fig 1. DC current gain as a function of collector current; typical values
Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
5 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
8. Package outline
3.1 2.7 3 0.6 0.2
1.3 1.0 4.2 3.6 0.45 0.38
3.0 1.7 2.5 1.3 4.8 4.4 1 2 0.50 0.35 0.26 0.10 04-11-11 5.2 5.0 Dimensions in mm 14.5 12.7
0.48 0.40 1 2 2.54 3 1.27
1.9 Dimensions in mm
04-11-16
Fig 3. Package outline SOT346 (SC-59A/TO-236)
Fig 4. Package outline SOT54 (SC-43A/TO-92)
0.45 0.38 4.2 3.6 1.27
4.2 3.6
0.45 0.38 0.48 0.40 1
3 max
2.5 max 1
0.48 0.40 2 2.54 3 1.27
4.8 4.4
2 5.08 2.54 3 5.2 5.0 14.5 12.7 04-06-28 5.2 5.0 Dimensions in mm 14.5 12.7 4.8 4.4
Dimensions in mm
05-01-10
Fig 5. Package outline SOT54A
Fig 6. Package outline SOT54 variant
3.0 2.8
3
1.1 0.9
0.45 0.15 2.5 1.4 2.1 1.2
1
2
1.9 Dimensions in mm
0.48 0.38
0.15 0.09 04-11-04
Fig 7. Package outline SOT23 (TO-236AB)
9397 750 15214 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
6 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
9. Packing information
Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package PDTD123TK PDTD123TS SOT346 SOT54 SOT54A SOT54 variant PDTD123TT
[1]
Description 4 mm pitch, 8 mm tape and reel bulk, straight leads tape and reel, wide pitch tape ammopack, wide pitch bulk, delta pinning 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 -115 -215 5000 -412 -112 10000 -135 -116 -126 -235
SOT23
For further information and the availability of packing methods, see Section 15.
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
7 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
10. Revision history
Table 10: Revision history Release date 20050721 Data sheet status Product data sheet Product data sheet Change notice Doc. number 9397 750 15214 9397 750 14583 Supersedes PDTD123T_SER_1 Document ID PDTD123T_SER_2 Modifications: PDTD123T_SER_1
•
Types PDTD123TS and PDTD123TT added
20050603
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
8 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
11. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
14. Trademarks
Notice — All referenced brands, product names, service names and trademarks are the property of their respective owners.
13. Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors
15. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 15214
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 21 July 2005
9 of 10
Philips Semiconductors
PDTD123T series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
16. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 3 3 3 4 4 6 7 8 9 9 9 9 9
© Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 21 July 2005 Document number: 9397 750 15214
Published in The Netherlands
很抱歉,暂时无法提供与“PDTD123TT”相匹配的价格&库存,您可以联系我们找货
免费人工找货