1157290

CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. 1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails. Your advantages • The benchmark that you can tailor with channel-precise design with integrated potential distribution • Easy operation for everyone through tool-free assembly, uninterrupted installation, and transparent operating state • Exceptionally easy design-in with the narrowest of space requirements and four protected outputs Commercial data Item number 1157290 Packing unit 1 pc Minimum order quantity 1 pc Product key CLA232 GTIN 4063151160036 Weight per piece (including packing) 94.5 g Weight per piece (excluding packing) 94.2 g Customs tariff number 85363010 Country of origin DE Jan 8, 2024, 9:47 AM Page 1 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Technical data Notes General Note LABS release – in accordance with test specification VW PV 3. 10.7:2005-0 Product properties Product type Device circuit breakers Product family CAPAROC Number of positions 1 No. of channels 1 Number of slots 1 Insulation characteristics Protection class III Pollution degree 2 Electrical properties No. of channels 1 General Operating voltage 10 V DC ... 30 V DC Rated voltage 12 V DC 24 V DC Rated current IN 2 A DC Rated current (pre-adjusted) 2A Rated surge voltage 0.5 kV Tripping method E (electronic) Required backup fuse Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. Short-circuit switching capacity 300 A Dielectric strength 35 V DC (Load circuit) Fuse electronic Efficiency > 99 % Closed circuit current I0 typ. 8.5 mA (no load at 24 V) Power dissipation typ. 0.2 W (no load at 24 V) < 0.3 W (in nominal operation at 24 V and 2 A) Measuring tolerance I ± 15 % (typ.) MTBF (IEC 61709, SN 29500) 21274544 h (at 25 °C with 21 % load) 9809987 h (at 40°C with 34.25% load) 1482752 h (at 40°C with 100% load) Voltage drop 0.04 V (at 2 A) Fail-safe element 5 A DC (per output channel) Jan 8, 2024, 9:47 AM Page 2 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Load circuit Shutdown time 4 s (with overload 1.1…1.5 x IN) 1 s (with overload 1.5…2.0 x IN) 0.1 s (with overload 2.0…3.0 x IN) typ. 10 ms (For short circuit > 3.0 x IN) Undervoltage switch-off ≤ 8.5 V DC (active) ≥ 9.2 V DC (inactive) Overvoltage switch-off ≥ 32.5 V DC (active) ≤ 30.5 V DC (inactive) Max. capacitive load ≤ 20000 µF (Depending on the current setting and the shortcircuit current available) Connection data Fuse-protected output Connection method Push-in connection Stripping length 10 mm Conductor cross section flexible 0.2 mm² ... 4 mm² Conductor cross section rigid 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm² Signaling Channel LED off off (Channel switched off) Channel LED yellow lit (Channel switched on, channel load > 80% ) flashing (Programming mode active) two flashes (Check the installation, no communication to power module) Channel LED green lit (Channel switched on) Channel LED red lit (Channel switched off, over- or undervoltage active) ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release) flashing (Channel switched off, ready to be switched back on, overload or short-circuit release) Dimensions Dimensional drawing Width 6.2 mm Height 132.4 mm Depth 111.3 mm (incl. DIN rail 7.5 mm) Material specifications Material PA 6 PA 6 Jan 8, 2024, 9:47 AM Page 3 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 PA 6 PC Flammability rating according to UL 94 V-0 Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) Ambient temperature (storage/transport) -40 °C ... 70 °C Altitude ≤ 4000 m (amsl) Humidity test 96 h, 95 % RH, 40 °C Shock (operation) 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) 25g (6 ms duration, half-sine shock pulse in accordance with  IEC 60068-2-27, continuous shock) 15g (6 ms duration, half-sine shock pulse in accordance with  IEC 60068-2-27, continuous shock. If more than six CAPAROC E1 modules are used in the system.) Vibration (operation) 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) Approvals UL approval Identification UL/C-UL Listed UL 508 UL Recognized UL 2367 UL 121201 Class I, Division 2, Groups A, B, C, D, T4A NEC Class 2 according to UL 1310 Standards and regulations Standards/specifications EN 61000-6-2 Note EMC – Immunity for industrial areas Standards/specifications EN 61000-6-3 Note EMC – Emission for residential, business and commercial properties and small operations Standards/specifications EN 60068-2-78 Note Environmental influences – Moisture and heat, constant Standards/specifications EN 50178 Note Equipping power installations with electronic equipment Standards/specifications EN 60068-2-6 Note Environmental influences – Vibrations (sinusoidal) Standards/specifications EN 60068-2-27 Note Environmental influences – Shocks Mounting Mounting type pluggable onto CAPAROC CR… current rail Jan 8, 2024, 9:47 AM Page 4 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Drawings Diagram t s 100 10 1 0,1 0,01 0,001 1 1,5 2 2,5 3 3,5 x IN 4 Trigger characteristic Product drawing Jan 8, 2024, 9:47 AM Page 5 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Dimensional drawing 6,2 132,4 111,3 Block diagram CH1 IN+ 5.1 OUT+ 1.1 1.2 1.3 1.4 IN- 6.1 µC CH1 Jan 8, 2024, 9:47 AM Page 6 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Application drawing PE N L Tripping factor Diagram 1,4 1,2 1,0 0,8 0,6 0,4 setting 4A settings 1A, 2A, 3A 0,2 0 10 12 14 16 18 20 22 24 26 28 30 Input voltage [V] Tripping characteristic according to the input voltage Jan 8, 2024, 9:47 AM Page 7 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/pc/products/1157290  UL Recognized Approval ID: FILE E 317172  UL Listed  cUL Listed Approval ID: FILE E 123528 Approval ID: FILE E 123528  UL Recognized Approval ID: FILE E 324415  cUL Listed  UL Listed Approval ID: FILE E 483407 Approval ID: FILE E 483407 cULus Listed cULus Listed Jan 8, 2024, 9:47 AM Page 8 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Classifications ECLASS ECLASS-11.0 27140401 ECLASS-12.0 27140401 ECLASS-13.0 27140401 ETIM ETIM 9.0 EC003538 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:47 AM Page 9 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:47 AM Page 10 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 Mandatory accessories CAPAROC CR 20 - Busbar 1110989 https://www.phoenixcontact.com/pc/products/1110989 Busbar for CAPAROC system with 20 slots. For installation on a DIN rail. CAPAROC CR 8 - Busbar 1115672 https://www.phoenixcontact.com/pc/products/1115672 Busbar for the CAPAROC system with 8 slots. For installation on a DIN rail. CAPAROC PM S-R - Power module 1115661 https://www.phoenixcontact.com/pc/products/1115661 Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. For DIN rail installation via the CAPAROC current rails. Jan 8, 2024, 9:47 AM Page 11 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 CAPAROC PM PN - Power module 1110986 https://www.phoenixcontact.com/pc/products/1110986 Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails. CAPAROC PM IOL - Power module 1115670 https://www.phoenixcontact.com/pc/products/1115670 Power module with IO-Link interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC for up to 20 channels. For DIN rail installation via the CAPAROC current rails. Accessories CAPAROC PD 0V - Potential distributors 1110987 https://www.phoenixcontact.com/pc/products/1110987 Potential distributor with Push-in connections for directly connecting the 0 V return conductor in the CAPAROC system. For DIN rail installation via the CAPAROC current rails. Jan 8, 2024, 9:47 AM Page 12 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 UC-TMF 6 - Marker for terminal blocks 0818140 https://www.phoenixcontact.com/pc/products/0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm, Number of individual labels: 80 UC-TM 6 - Marker for terminal blocks 0818085 https://www.phoenixcontact.com/pc/products/0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Jan 8, 2024, 9:47 AM Page 13 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 UCT-TM 6 - Marker for terminal blocks 0828736 https://www.phoenixcontact.com/pc/products/0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 UCT-TMF 6 - Marker for terminal blocks 0828746 https://www.phoenixcontact.com/pc/products/0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm, Number of individual labels: 60 CAPAROC CR EXT20 - Busbar 1115674 https://www.phoenixcontact.com/pc/products/1115674 Extension busbar with 20 slots for the CAPAROC system. For installation on a DIN rail. Jan 8, 2024, 9:47 AM Page 14 (15) CAPAROC E1 12-24DC/2A - Electronic circuit breaker 1157290 https://www.phoenixcontact.com/pc/products/1157290 CAPAROC CR EXT8 - Busbar 1110990 https://www.phoenixcontact.com/pc/products/1110990 Extension busbar with 8 slots for CAPAROC system. For installation on a DIN rail. CAPAROC CR EXT4 - Busbar 1110991 https://www.phoenixcontact.com/pc/products/1110991 Extension busbar with 4 slots for the CAPAROC system. For installation on a DIN rail. CAPAROC CR CON - Metal part 1270955 https://www.phoenixcontact.com/pc/products/1270955 Metal extension rails from connecting CAPAROC initial busbars. Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstraße 8 D-32825 Blomberg +49 (0) 5235-3 00 info@phoenixcontact.com Jan 8, 2024, 9:47 AM Page 15 (15)