1430433

https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, Universal, 5-position, shielded, Socket angled M12, Coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Screw connection: proven connection technology for a large selection of different conductors  Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356322706 Technical data Dimensions Diameter housing 20 mm Length 37 mm External cable diameter 6 mm ... 8 mm Stripping length of the sheath 40 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending 12/24/2021   Page 1 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Technical data General forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with coupling sleeve) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The connector pin assignment can be rotated 90° to the cable outlet Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years 12/24/2021   Page 2 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 1 Dimensional drawing Ø20 5 M12 2 4 3 37 18 Cable connection side M12 (screw connection) ca. 54 M12 x 1 socket, angled, shielded Schematic diagram 3 4 5 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 9.0 27440102 12/24/2021   Page 3 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Classifications ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 6.0 EC002062 ETIM 7.0 EC002635 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A  FILE E 221474  FILE E 221474 12/24/2021   Page 4 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Approvals  cULus Recognized      Accessories Accessories Cable by the meter Cable reel - SAC-5P-100,0-PUR/SH-0,34 - 1501728 By the meter, Cable reel, shielded, PUR halogen-free, black-gray RAL 7021, 5-wire, color single wire: Brown, white, blue, black, gray, cable length: 100 m     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Ferrule Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver     Plug for cable screw gland Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets     12/24/2021   Page 5 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Accessories Screwdriver tools Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Stripping tool Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     12/24/2021   Page 6 / 7 https://www.phoenixcontact.com/pi/products/1430433 Connector - SACC-M12FR-5CON-PG 9-SH - 1430433 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 12/24/2021   Page 7 / 7