1525555

https://www.phoenixcontact.com/us/products/1525555 Bus system flat-type plug - SACCEC-M12MSB-2CONM16/0,5-910 - 1525555 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Bus system flush-type plug, PROFIBUS, 2-pos., M12, shielded, B-coded, front/screw mounting with M16 thread, with 0.5 m bus cable, 2 x 0.25 mm²     Key commercial data Packing unit 11 Weight per Piece (excluding packing) 61.9 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 2 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II 04.11.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1525555 Bus system flat-type plug - SACCEC-M12MSB-2CONM16/0,5-910 - 1525555 Technical data General Pollution degree 3 Test voltage 2500 V Connection method PROFIBUS Mounting type Front mounting M16 x 1.5 With locking nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material NBR Cable Cable type PROFIBUS Cable type (abbreviation) 910 UL AWM style 21198 (80°C/300 V) Conductor cross section 2x 0.25 mm² (signal line) AWG signal line 24 Conductor structure signal line 19x 0.13 mm Core diameter including insulation 2.55 mm ±0.07 mm Wire colors Red, green Overall twist 2 cores with 2 fillers to the core Shielding Plastic-coated aluminum foil, tinned copper braided shield Optical shield covering 85 % External sheath, color Violet, RAL 4001 External cable diameter D 7.8 mm ± 0.2 mm Number of bending cycles 4000000 Bending radius 65 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Max. bending cycles 5000000 Bending radius 80 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² 04.11.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1525555 Bus system flat-type plug - SACCEC-M12MSB-2CONM16/0,5-910 - 1525555 Technical data Cable Outer sheath, material PUR Material conductor insulation Foamed PE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km Conductor resistance 157.2 Ω/km Working capacitance 30 nF Wave impedance nom. 150 Ω ±10 % (3 MHz ... 20 MHz) Shield attenuation ≤ 4.9 dB (at 16 MHz) Nominal voltage, cable 30 V Test voltage Core/Core 1500 V (50 Hz, 1 min.) Test voltage Core/Shield 1500 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1 Other resistance Low adhesion Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -30 °C ... 70 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 04.11.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1525555 Bus system flat-type plug - SACCEC-M12MSB-2CONM16/0,5-910 - 1525555 Classifications UNSPSC UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  GOST  Drawings ° Dimensioned drawing 4 M16x1,5 45 Ø17 +0,2 Schematic diagram 1 Housing cutout for M16 fastening thread, mounting panel with thread 3 5 2 Pin assignment M12 male connector, 5-pos., B-coded, male side 04.11.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1525555 Bus system flat-type plug - SACCEC-M12MSB-2CONM16/0,5-910 - 1525555 Cable cross section Dimensioned drawing 13 M12x1 M16x1,5 2 26 46 PROFIBUS [910] M12 flush-type plug Circuit diagram 1 2 GN 4 RD 3 5 Contact assignment of the M12 plug © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 04.11.2013   Page 5 / 5