M23-5EP198AA600S - Device connector front
mounting
1628485
https://www.phoenixcontact.com/us/products/1628485
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
M23, Device connector front mounting, series: M23 PRO, angled rotatable, for standard and ONECLICK fast locking system, No. of pos.:
5+PE, contact connection type: Pin, Crimp connection, flange dimensions: 28 mm x 28 mm, Item is lead-free in accordance with RoHS II
without Exemption 6c (Pb 50 V AC, conductive connector
housings must be grounded
• Ensure that the protective or functional ground has been
properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3
are applicable when combining several circuits in a cable and/or
connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the
download page at phoenixcontact.com/products must be
observed for this product.
• Operate the connector only when it is fully plugged in and
interlocked.
• Ensure that when laying the cable, the tensile load on the
connectors does not exceed the upper limit specified in the
standards.
• Observe the minimum bending radius of the cable. Lay the
cable without twisting it.
• The connector warms up in normal operation. Depending on the
Jan 8, 2024, 10:06 AM
Page 2 (6)
M23-5EP198AA600S - Device connector front
mounting
1628485
https://www.phoenixcontact.com/us/products/1628485
ambient conditions, the surface of the connector can continue to
warm up. In this case, the user is responsible for posting
warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product type
Circular connectors (device side)
Material specifications
Flammability rating according to UL 94
V0
Connector
Insulating body
Note
Order information: Order crimp contacts 6 x Ø 2 mm separately
Insulation body material
PA 6.6
Insertion/withdrawal cycles
100
Connection method
Crimp connection
Contact switching type
Pin
Application
Power
Number of positions
6
Connection profile
5+PE
Contact diameter Power
contacts
2 mm
Litz wire cross-section Power
contacts min.
0.25 mm²
Litz wire cross-section Power
contacts max.
4 mm²
Rated current Power
contacts
30 A
Note
for max. connection cross section
Rated voltage
630 V
Rated surge voltage
6 kV
Overvoltage category
III
Degree of pollution
3
Installation height
3000 m
Housing
Housing material
GD-Zn
Flange dimensions
28 mm x 28 mm
Type of locking
for standard and ONECLICK fast locking system
Degree of protection (plugged in)
IP66 / IP68 (2m / 24h) / IP69K
Thread type
M23
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP68
Ambient temperature (operation)
-40 °C ... 105 °C (see to derating)
Permanent temperature
125 °C (DIN EN 60512-9-2 / 1000 h)
Jan 8, 2024, 10:06 AM
Page 3 (6)
M23-5EP198AA600S - Device connector front
mounting
1628485
https://www.phoenixcontact.com/us/products/1628485
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1628485
UL Listed
cUL Listed
Approval ID: E468743-20190627
Approval ID: E468743-20190627
cULus Listed
Jan 8, 2024, 10:06 AM
Page 4 (6)
M23-5EP198AA600S - Device connector front
mounting
1628485
https://www.phoenixcontact.com/us/products/1628485
Classifications
ECLASS
ECLASS-11.0
27440109
ECLASS-12.0
27440109
ECLASS-13.0
27440109
ETIM
ETIM 9.0
EC003569
UNSPSC
UNSPSC 21.0
39121400
Jan 8, 2024, 10:06 AM
Page 5 (6)
M23-5EP198AA600S - Device connector front
mounting
1628485
https://www.phoenixcontact.com/us/products/1628485
Environmental product compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 10:06 AM
Page 6 (6)
很抱歉,暂时无法提供与“1628485”相匹配的价格&库存,您可以联系我们找货
免费人工找货