1628498

M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M23, Device connector front mounting, series: M23 PRO Signal, angled rotatable, for standard and ONECLICK fast locking system, No. of pos.: 12, Direction of rotation: Standard, contact connection type: Pin, Crimp connection, flange dimensions: 26 mm x 26 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb  50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to Jan 8, 2024, 10:06 AM Page 2 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connectors (device side) Material specifications Flammability rating according to UL 94 V0 Connector Insulating body Note Order information: Order crimp contacts Ø 1 mm separately Coding N Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Crimp connection Contact switching type Pin Application Signal Number of positions 12 Direction of rotation Standard Connection profile 12 Contact diameter Signal contacts 1 mm Litz wire cross-section Signal contacts min. 0.08 mm² Litz wire cross-section Signal contacts max. 1 mm² Nominal current per signal contact 8A Note for max. connection cross section Rated voltage Signal contact 150 V Rated surge voltage 2.5 kV Overvoltage category III Degree of pollution 3 Installation height 2000 m Housing Housing material GD-Zn Flange dimensions 26 mm x 26 mm Type of locking for standard and ONECLICK fast locking system Pg screw connection none Degree of protection (plugged in) IP66 / IP68 (2 m / 24 h) Thread type M23 Environmental and real-life conditions Ambient conditions Degree of protection IP68 Jan 8, 2024, 10:06 AM Page 3 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Ambient temperature (operation) -40 °C ... 105 °C (see to derating) Permanent temperature 125 °C (DIN EN 60512-9-2 / 1000 h) Jan 8, 2024, 10:06 AM Page 4 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Drawings Schematic diagram N 9 8 7 1 12 10 PO 6 5 11 2 3 4 Connector pin assignment Jan 8, 2024, 10:06 AM Page 5 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Dimensional drawing 138 ° 192 ° 4x Ø3 ,1 55 40 M23x1 26,9 41,4 19,8 25,6 Technical drawings can be found under Downloads Jan 8, 2024, 10:06 AM Page 6 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Dimensional drawing A-A -0,2 A +0,1 Ø20,1 4xM3 area for Rz16 27 ±0,5 Ø 0,1 A Rz16 A A 19,8 Installation dimensions Jan 8, 2024, 10:06 AM Page 7 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 I [A] Diagram 15 10  5 2  = 12x1,0 mm 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130  [°C] I = current strength, ϑ = ambient temperature, 12x 8 A Jan 8, 2024, 10:06 AM Page 8 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1628498  cUL Recognized  UL Recognized Approval ID: E335019-20141210 Approval ID: E335019-20141210 cULus Recognized Jan 8, 2024, 10:06 AM Page 9 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Classifications ECLASS ECLASS-11.0 27440109 ECLASS-12.0 27440109 ECLASS-13.0 27440109 ETIM ETIM 9.0 EC003569 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 10:06 AM Page 10 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 10:06 AM Page 11 (17) M23-12P1N8AA500S - Device connector front mounting 1628498 https://www.phoenixcontact.com/us/products/1628498 Accessories M23-Z0001 - Screw 1035117 https://www.phoenixcontact.com/us/products/1035117 Anchor screw, self-tapping, for M23PRO series angled device connectors UNIFOX-RT M23 12 - Contact removal tool 1247862 https://www.phoenixcontact.com/us/products/1247862 Removal tool for the M23 PRO series 12-position signal contact carrier RC-11P2000 - Crimp contact 1596770 https://www.phoenixcontact.com/us/products/1596770 Crimp contact, Pin, turned, Single contact, contact diameter: 1 mm, crimp range: 0.08 mm2 ... 0.22 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb