2700130

PSD-S OE LED RFL CL/BU LED random flashing beacon element, 24 V DC AUTOMATION Data sheet 8118_en_00 1 © PHOENIX CONTACT 2010-08-23 Description This optical signal element is part of a modular signal tower. Features According to your requirements, a signal tower may comprise – any combination of up to five signal elements. You may use – up to five optical signal elements or up to four optical and one – audible signal element. LED random flashing beacon element, 24 V DC Colors: plain and blue Degree of protection: IP65, when installed or with cover An audible signal element can be used as top element only. A bayonet locking system establishes the mechanical and electrical connection between the elements. Connection elements with spring-cage or screw connection can be used for electrical connection of the signal tower. Mounting elements for base or tube mounting can be used to mount the signal tower. Make sure you always use the latest documentation. It can be downloaded from the product at www.phoenixcontact.net/catalog. This data sheet is valid for all products listed on the following page: PSD-S OE LED RFL CL/BU 2 Table of contents 1 Description .............................................................................................................................. 1 2 Table of contents ..................................................................................................................... 2 3 Ordering data .......................................................................................................................... 3 4 Technical Data......................................................................................................................... 3 5 Example of a signal tower........................................................................................................ 4 6 Assembly notes for a signal tower ........................................................................................... 4 7 Assembling the individual elements......................................................................................... 5 8 Example for signal tower dimensions ...................................................................................... 5 8118_en_00 PHOENIX CONTACT 2 PSD-S OE LED RFL CL/BU 3 Ordering data Description Type Order No. Pcs. / Pkt. LED random flashing beacon element, 24 V DC, clear PSD-S OE LED RFL CL 2700130 1 LED random flashing beacon element, 24 V DC, blue PSD-S OE LED RFL BU 2700135 1 4 Technical Data Dimensions (in mm) 65,5 56 Ø70 Diameter 70 mm Height 65.5 mm General data Material Polycarbonate PC Weight 78 g Ambient temperature (operation) -20 °C ... 50 °C Degree of protection IP65, when installed or with cover Mounting position Any Connection Rubber seal pre-installed for each element Electrical data Input voltage 24 V DC Inrush current max. 500 mA Current consumption 250 mA Optical signal type LED random flashing beacon (RLF) Service life, electrical max. 50,000 h Operating time 100 % Approvals / conformities Conformance with EMC directive 2004/108/EC For the latest approvals, please visit www.phoenixcontact.net/catalog. 8118_en_00 PHOENIX CONTACT 3 PSD-S OE LED RFL CL/BU 5 Example of a signal tower 6 Assembly notes for a signal tower – – You may use up to five signal elements in a signal tower. Use only one audible element in a signal tower and position this element on top. When closing the bayonet locking system, observe the markings (see "Assembling the individual elements"). – 1 2 3 4 Figure 1 Example of a signal tower Key: 1 Audible signal element 2 Optical signal element 3 Connection element 4 Assembly element 8118_en_00 PHOENIX CONTACT 4 PSD-S OE LED RFL CL/BU 7 Assembling the individual elements 8 Example for signal tower dimensions The following figure shows the dimensions of a typical signal tower. 3 1 ON 1 ON 2 2 3 3 1 2 3 56 ON 408 2 4 x 56 (= 224) 1 ON 2 3 1 2 3 86 ON 112 1 ON Figure 2 • • • Assembling the individual elements Select the elements for your application. Connect the elements to be assembled so that the markings are aligned. Turn the upper element in the direction of the arrow. 8118_en_00 Ø70 Figure 3 Dimensions of a signal tower (example) PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com 5