2734507

https://www.phoenixcontact.com/us/products/2734507 Distributed I/O device - IBS RL 24 DO 16/8-R-LK-2MBD - 2734507 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Digital input device for INTERBUS; fiber optic technology with 2 Mbaud, 16 inputs that can be read (24 V DC), sensor connection via 5-pos. M12 female connectors, rugged metal housing, IP67 protection The illustration shows version IBS RL 24 DO 16/8-R-LK Product description INTERBUS Ruggedline modules are provided for harsh ambient conditions or in the case of high requirements regarding system diagnostics. To ensure maximum availability, these modules are equipped with a zinc die-cast housing (IP67). Therefore, they can be installed in the direct vicinity of welding tongs. Each Ruggedline module consists of a mounting plate and and electronics module. The electronics module is snapped onto the mounting plate and fixed with two screws if necessary. I/O errors can be clearly localized by means of extended diagnostics. Short-circuits of the power supply of the sensors, for example, are reported in groups of 4 inputs. And, in the case of a short-circuit at an output, the respective output is even reported directly. This information will be made available to the controller and displayed at the module. In the case of modules with fiber optic connection, the diagnostics capability even goes one step further. By using the latest fiber optic technology, the quality of the transmission path is permanently ascertained and optimally adjusted. This information is available to the controller and at the module. Due to these additional features, slow deterioration of the transmission path can be detected before errors occur during transmission or transmission is interrupted. In the case of Ruggedline modules, the bus medium can be selected. Apart from versions with fiber optic connection (polymer fiber), there are modules which are used with twisted pair cables. The bus medium can be changed from FO installation to a copper medium at any time using the corresponding plug-in adapters. The bus is connected by means of IP67 plug-in plugs, which transport both the bus signal and the power supply to the modules. For easy preparation, the power supply cable is connected to the plug using the QUICKON fast connection method, and connection of the fiber optic cable is made using a simple cutting and assembly tool; additional polishing is not necessary.   Product Features  Rugged metal housing  Comprehensive diagnostic functions  Rugged Line connector for INTERBUS, either with fiber optic or twisted pair, and supply voltage  M12 connector for I/O devices     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 850.7 GRM Custom tariff number 85176200 09/08/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2734507 Distributed I/O device - IBS RL 24 DO 16/8-R-LK-2MBD - 2734507 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 179 mm Height 67 mm Depth 71 mm Note on dimensions With bus connectors and mounting plate Ambient conditions Ambient temperature (operation) -20 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 100 % Permissible humidity (storage/transport) 95 % (non-condensing) Air pressure (operation) 800 hPa ... 1060 hPa (up to 2000 m above sea level) Air pressure (storage/transport) 700 hPa ... 1060 hPa (up to 3000 m above sea level) Degree of protection IP65/IP67 General Weight 810 g Note on weight specifications Without plug or mounting plate Mounting type Wall mounting Note Seal unused slots/connections to ensure the degree of protection. Test section Between bus logic and outputs 500 V AC 50 Hz 1 min Interfaces Fieldbus system INTERBUS Designation INTERBUS Connection method Optic fiber (polymer fiber 980/1000 µm) Transmission speed 2 MBit/s Transmission physics FO Power supply for module electronics Supply voltage 24 V DC Supply voltage range 18.5 V DC ... 32 V DC (including ripple) Ripple Max 3.6 VSS within the permissible voltage range Supply current typ. 120 mA Current consumption 120 mA 09/08/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2734507 Distributed I/O device - IBS RL 24 DO 16/8-R-LK-2MBD - 2734507 Technical data Digital outputs Output name Digital outputs Connection method 2, 3-wire Number of outputs 16 Protective circuit Electronic short-circuit/overload protection for each channel Output voltage 24 V DC Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module 4A Nominal load, inductive 12 VA (1.2 H; 48 Ω) Nominal load, lamp 12 W Nominal load, ohmic 12 W Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 09/08/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2734507 Distributed I/O device - IBS RL 24 DO 16/8-R-LK-2MBD - 2734507 Approvals Approvals Approvals UL Recognized / cUL Recognized / INTERBUS CLUB / null / UL Recognized / null / null / null / null / null / null / null / null / null / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  INTERBUS CLUB    UL Recognized          09/08/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2734507 Distributed I/O device - IBS RL 24 DO 16/8-R-LK-2MBD - 2734507 Approvals           cULus Recognized  Drawings 0 ... OUT 7 OUT 0 Connection diagram ... 7 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/08/2014   Page 5 / 5