2838199

https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Surge voltage arrester consisting of base element with remote indicator contact and ground connectors, for mounting on NS 35/7.5, nominal voltage: 230 V AC, 3 + 1 circuit Why buy this product  With or without floating remote indication contact  Multi-channel type 2 arresters  Optical, mechanical status indication for the individual arresters  Type 2 consistent plug-in surge arresters  Mechanical keying of all slots  Disconnect device on each individual plug       Key commercial data Packing unit 1 Minimum order quantity 1 Catalog page Page 36 (TT-2011) GTIN Custom tariff number 85363030 Country of origin GERMANY Technical data Standards Housing material PBT / PA Inflammability class according to UL 94 V0 Color black Standards for air and creepage distances DIN EN 60664-1 Degree of protection IP20 Mounting type DIN rail: 35 mm Design DIN rail module, two-section, divisible Number of positions 4 Ambient temperature (operation) -40 °C ... 80 °C Message: Surge protection fault Optical, remote indicator contact 04.10.2012   Page 1 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Technical data Standards Direction of action 3L-N & N-PE Width 70.8 mm Height 96.8 mm Depth 65.5 mm Pitch unit 4 Div. Protective circuit IEC category II IEC category T2 EN type T2 Nominal voltage UN 230 V AC (400 V AC) Nominal voltage UN 230 V AC ... 415 V AC Arrester rated voltage UC 275 V AC Arrester rated voltage UC (L-N) 275 V AC Arrester rated voltage UC (N-PE) 260 V AC UT (TOV-proof) 335 V AC (5 s / L-N) UT (TOV-proof) 1200 V AC (200 ms / N-PE) Nominal frequency fN 50 Hz (60 Hz) Ground conductor current IPE ≤ 1 µA Standby power consumption PC ≤ 360 mVA Max. discharge surge current Imax (8/20) µs 40 kA Max. discharge surge current Imax (8/20) µs maximum (L-N) 40 kA Max. discharge surge current Imax (8/20) µs maximum (L-PE) 40 kA Max. discharge surge current Imax (8/20) µs maximum (N-PE) 40 kA Nominal discharge surge current In (8/20) µs (L-N) 20 kA Nominal discharge surge current In (8/20) µs (L-PE) 20 kA Nominal discharge surge current In (8/20) µs (N-PE) 20 kA Lightning test current (10/350) µs, peak value limp 12 kA (N-PE) Impulse operate voltage at 6 kV (1.2/50)µs (N-PE) ≤ 1.5 kV Protection level UP (L-N) ≤ 1.35 kV Protection level UP (L-PE) ≤ 1.6 kV Protection level UP (N-PE) ≤ 1.5 kV Residual voltage (L-N) ≤ 1.35 kV (at In) Residual voltage (L-N) ≤ 1.2 kV (at 10 kA) Residual voltage (L-N) ≤ 1.1 kV (at 5 kA) Residual voltage (L-N) ≤ 0.95 kV (at 3 kA) Residual voltage (L-PE) ≤ 1.6 kV (at In) Residual voltage (L-PE) ≤ 1.35 kV (at 10 kA) Residual voltage (L-PE) ≤ 1.2 kV (at 5 kA) Residual voltage (L-PE) ≤ 1 kV (at 3 kA) Residual voltage (N-PE) ≤ 0.4 kV (at In) Residual voltage (N-PE) ≤ 0.25 kV (at 10 kA) Residual voltage (N-PE) ≤ 0.15 kV (at 5 kA) 04.10.2012   Page 2 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Technical data Protective circuit Residual voltage (N-PE) ≤ 0.1 kV (at 3 kA) Response time (L-N) ≤ 25 ns Response time (L-PE) ≤ 100 ns Response time (N-PE) ≤ 100 ns Max. required backup fuse with branch wiring 125 A (gL) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Follow current quenching capacity If (N-PE) 100 A (260 V) Connection, protective circuit Connection method Screw connection Connection type IN Biconnect screw terminal block Connection type OUT Biconnect screw terminal block Screw thread M5 Tightening torque 4.5 Nm Stripping length 14.5 mm Conductor cross section stranded min. 0.5 mm² Conductor cross section stranded max. 25 mm² Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG/kcmil min. 20 Conductor cross section AWG/kcmil max 2 Remote indicator contact Connection name Remote fault indicator contact Switching function PDT contact Connection method Screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG/kcmil min. 28 Conductor cross section AWG/kcmil max 16 Maximum operating voltage Umax. AC 250 V AC Maximum operating voltage Umax DC 30 V DC Max. operating current Imax 0.75 A AC (250 V AC) Max. operating current Imax 3 A AC (125 V AC) Max. operating current Imax 2 A DC (30 V DC) Min. permissible switching capacity 0.12 VA (12 V, 10 mA) Standards Standards/regulations IEC 61643-1 2005 04.10.2012   Page 3 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Technical data Standards Standards/regulations EN 61643-11/A11 2007 Classifications eclass eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 etim ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 unspsc UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals IECEE CB Scheme / UL Recognized / KEMA-KEUR / ÖVE / cUL Recognized / GOST / GL / CCA / cULus Recognized Ex Approvals Approvals submitted Approval details IECEE CB Scheme  04.10.2012   Page 4 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Approvals UL Recognized  KEMA-KEUR  ÖVE  cUL Recognized  GOST  GL  CCA  cULus Recognized  Accessories Accessories Bridges Wiring bridge - MPB 18/4- 8 - 2809283 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 8-pos.     04.10.2012   Page 5 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Accessories Wiring bridge - MPB 18/4-12 - 2809296 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 12-pos.     Wiring bridge - MPB F200X16/ 1GS - 2818339 Wiring bridge flexible, diameter 16 mm², with a fork-type cable lug on one side, length: 200 mm     Wiring bridge - MPB F400X16/ 1GS - 2818342 Wiring bridge flexible, diameter 16 mm², with a fork-type cable lug on one side, length: 400 mm     Wiring bridge - MPB F600X16/ 1GS - 2818355 Wiring bridge flexible, diameter: 16 mm², with a fork-type cable lug on one side, length: 600 mm     Wiring bridge - MPB F600X16/ 1GS - 2818355 Wiring bridge flexible, diameter: 16 mm², with a fork-type cable lug on one side, length: 600 mm     Wiring bridge - MPB F400X16/ 1GS - 2818342 Wiring bridge flexible, diameter 16 mm², with a fork-type cable lug on one side, length: 400 mm     04.10.2012   Page 6 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Accessories Wiring bridge - MPB F200X16/ 1GS - 2818339 Wiring bridge flexible, diameter 16 mm², with a fork-type cable lug on one side, length: 200 mm     Wiring bridge - MPB 18/4-12 - 2809296 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 12-pos.     Wiring bridge - MPB 18/4- 8 - 2809283 Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 8-pos.     Wiring bridge - MPB 18/1-57 - 2809238 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.     Wiring bridge - MPB 18/1-12 - 2748593 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.     04.10.2012   Page 7 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Accessories Wiring bridge - MPB 18/1- 9 - 2748580 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.     Wiring bridge - MPB 18/1- 8 - 2748577 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.     Wiring bridge - MPB 18/1- 6 - 2748564 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.     Wiring bridge - MPB 18/1- 4 - 2809225 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.     Wiring bridge - MPB 18/1- 3 - 2809212 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.     Wiring bridge - MPB 18/1- 2 - 2809209 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.     04.10.2012   Page 8 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Accessories Marking Zack marker strip - ZBN 18,LGS:ERDE - 2749589 Zack marker strip, Strip, white, Labeled, Horizontal: Grounding symbol, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Zack marker strip - ZBN 18,LGS:L1-N,ERDE - 2749576 Zack marker strip, Strip, white, Labeled, Horizontal: L1, L2, L3, N, GND, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm     Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Feed-through terminal block - DK-BIC-35 - 2749880 Feed-through terminal block for VAL and FLT applications     Drawings 04.10.2012   Page 9 / 10 https://www.phoenixcontact.com/us/produkte/2838199 Type 2 surge protection device - VAL-MS 230/3+1-FM - 2838199 Dimensioned drawing Circuit diagram 14 12 99 FM 58 22,5 51,5 65,5 45 11 L1 L2 L3 N Application drawing © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 04.10.2012   Page 10 / 10