2864419

Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. MCR loop-powered isolator, 1-channel, for the electrical isolation of current signals without auxiliary power, with screw connection Product Description The 6.2 mm narrow passive loop-powered isolator MINI MCR-SL-...CP-I-I... is used for the electrical isolation and filtering of 0...20 mA and 4...20 mA standard current signals without additional supply voltage. Your advantages • Voltage drop at isolating amplifier of just 1.7 V • Does not require additional auxiliary voltage • Supplied by an input loop • Two channels on a design width of just 6.2 mm • Highly compact 2-conductor passive isolators for the electrical isolation and filtering of standard analog signals Commercial Data Item number 2864419 Packing unit 1 pc Minimum order quantity 1 pc Sales Key C01 Product Key CK1213 Catalog Page Page 101 (C-7-2015) GTIN 4017918974848 Weight per Piece (including packing) 84.5 g Weight per Piece (excluding packing) 59 g Customs tariff number 85437090 Country of origin DE Oct 27, 2022, 7:04 PM Page 1 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Technical Data Product properties Product type Passive isolators No. of channels 1 Insulation characteristics Overvoltage category II Pollution degree 2 Electrical properties No. of channels 1 Electrical isolation 2-way isolation Electrical isolation between input and output yes Limit frequency (3 dB) 75 Hz Cold junction errors ≤ Typical cold point errors ≤ Maximum power dissipation for nominal condition 34 mW Signal transmission behavior In = Out Step response (10-90%) 5 ms (at 600 Ω load) Maximum temperature coefficient ≤ 0.002 %/K (of measured value / 100 Ω load) Temperature coefficient, typical < 0.002 %/K (of measured value / 100 Ω load) Maximum transmission error ≤ 0.1 % (of final value) Additional error, load-dependent < 0.03 % (of measured value / 100 Ω load) Electrical isolation Input/output Rated insulation voltage 50 V AC/DC Test voltage 1.5 kV AC (50 Hz, 60 s) Insulation Basic insulation in accordance with IEC/EN 61010 Supply Supply voltage range no separate supply voltage necessary Power consumption 34 mW Input data Signal: Current Number of inputs 1 Configurable/programmable no Max. voltage input signal 18 V Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Max. current input signal 40 mA Response current approx. 190 µA Input voltage limitation < 2 V (20 mA) Oct 27, 2022, 7:04 PM Page 2 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Voltage dissipation 1.9 V (I = 20 mA) Output data Signal: Current Number of outputs 1 Configurable/programmable no Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Load/output load current output < 600 Ω (at I = 20 mA output signal) Ripple < 10 mVrms (at 600 Ω) Connection data Connection method Screw connection Stripping length 12 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 12 Dimensions Dimensional drawing Width 6.2 mm Height 93.1 mm Depth 101.2 mm Material specifications Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 Housing material PBT Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m Permissible humidity (operation) 5 % ... 95 % (non-condensing) Oct 27, 2022, 7:04 PM Page 3 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Approval data CE Certificate CE-compliant UKCA Certificate UKCA-compliant UL, USA / Canada Identification UL 508 Recognized Class I, Div. 2, Groups A, B, C, D Shipbuilding approval Certificate DNV GL TAA00000BW DNV GL data Temperature B Humidity B Vibration B EMC B Enclosure A EMC data Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Note When being exposed to interference, there may be minimal deviations. Electrostatic discharge Standards/regulations EN 61000-4-2 Electrostatic discharge Comments Criterion B Electromagnetic HF field Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Evaluation criterion A Fast transients (burst) Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Evaluation criterion B Surge current load (surge) Standards/regulations EN 61000-4-5 Surge current load (surge) Oct 27, 2022, 7:04 PM Page 4 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Comments Criterion B Conducted interference Designation Conducted interferences Standards/regulations EN 61000-4-6 Evaluation criterion A Standards and regulations Electrical isolation 2-way isolation Mounting Mounting type DIN rail mounting Assembly instructions The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. Mounting position any Oct 27, 2022, 7:04 PM Page 5 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Drawings Block diagram IN Sensor / Field OUT I US 4-wire PWR max. 18VDC GND 1 2 OUT + – 3 4 2 1 IN I GND 1 OUT I active GND 2 PLC / DCS 5 5 + 6 passive – 6 7 8 Oct 27, 2022, 7:04 PM Page 6 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Dimensional drawing 93,1 102,5 6,2 Application drawing UB UV = 1,7 V I I UE I I RB MINI MCR-SL-1CP-I-I Oct 27, 2022, 7:04 PM Page 7 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Approvals  cUL Recognized  UL Recognized Approval ID: FILE E 123528 Approval ID: FILE E 123528 DNV GL  Approval ID: TAA00000BW  cUL Recognized  UL Recognized  ATEX Approval ID: FILE E 199827 Approval ID: FILE E 199827 Approval ID: 2864419_Ex-n cULus Recognized cULus Recognized Oct 27, 2022, 7:04 PM Page 8 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Classifications ECLASS ECLASS-9.0 27210120 ECLASS-10.0.1 27210120 ECLASS-11.0 27210120 ETIM ETIM 8.0 EC002653 UNSPSC UNSPSC 21.0 39121000 Oct 27, 2022, 7:04 PM Page 9 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Oct 27, 2022, 7:04 PM Page 10 (11) Loop-powered isolators - MINI MCR-SL-1CP-I-I 2864419 https://www.phoenixcontact.com/us/products/2864419 Accessories Transparent cover Transparent cover - MINI MCR DKL - 2308111 https://www.phoenixcontact.com/us/products/2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm Marking label Marking label - MINI MCR-DKL-LABEL - 2810272 https://www.phoenixcontact.com/us/products/2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 27, 2022, 7:04 PM Page 11 (11)