Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
MCR passive isolator, single-channel, for electrical isolation of current signals without supply
voltage, with spring-cage connection.
Replacement item: 2864419 MINI MCR-SL-1CP-I-I
Your advantages
• Voltage drop at isolating amplifier of just 1.7 V
• Does not require additional auxiliary voltage
• Supplied by an input loop
• Highly compact 2-conductor passive isolators for the electrical isolation and filtering of standard analog signals
• Two channels on a design width of just 6.2 mm
Commercial Data
Item number
2864749
Packing unit
1 pc
Minimum order quantity
1 pc
Note
Made to Order (non-returnable)
Sales Key
C01
Product Key
CK1213
Catalog Page
Page 101 (C-7-2015)
GTIN
4017918974947
Weight per Piece (including packing)
76.5 g
Weight per Piece (excluding packing)
52.2 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:34 AM
Page 1 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Technical Data
Product properties
Product type
Passive isolators
No. of channels
1
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Rated insulation voltage
50 V AC/DC
Electrical isolation
Basic insulation in accordance with EN 61010
Electrical isolation between input and output
yes
Limit frequency (3 dB)
75 Hz
Maximum power dissipation for nominal condition
34 mW
Test voltage input/output
1.5 kV AC (50 Hz, 60 s)
Test voltage channel/channel
1.5 kV AC (50 Hz, 60 s)
Signal transmission behavior
In = Out
Step response (10-90%)
5 ms (at 600 Ω load)
Maximum temperature coefficient
≤ 0.002 %/K (of measured value / 100 Ω load)
Temperature coefficient, typical
< 0.002 %/K (of measured value / 100 Ω load)
Maximum transmission error
≤ 0.1 % (of final value)
Additional error, load-dependent
< 0.03 % (of measured value / 100 Ω load)
Supply
Supply voltage range
no separate supply voltage necessary
Power consumption
34 mW
Input data
Signal:
Description of the input
Current input
Number of inputs
1
Configurable/programmable
no
Max. voltage input signal
18 V
Current input signal
0 mA ... 20 mA
4 mA ... 20 mA
Max. current input signal
40 mA
Response current
approx. 190 µA
Input voltage limitation
< 2 V (20 mA)
Voltage dissipation
1.9 V (I = 20 mA)
Output data
Oct 27, 2022, 7:34 AM
Page 2 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Signal: Current
Number of outputs
1
Configurable/programmable
no
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current output
< 600 Ω (at I = 20 mA output signal)
Ripple
< 10 mVrms (at 600 Ω)
Connection data
Connection method
Spring-cage connection
Stripping length
8 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Dimensions
Dimensional drawing
Width
6.2 mm
Height
93.1 mm
Depth
102.5 mm
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Approval data
CE
Certificate
CE-compliant
ATEX
Oct 27, 2022, 7:34 AM
Page 3 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Identification
II 3 G Ex nA II T6 X
UL, USA / Canada
Identification
UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D
GL
Identification
GL EMC 2 D
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Electrostatic discharge
Standards/regulations
EN 61000-4-2
Electrostatic discharge
Comments
Criterion B
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Evaluation criterion
A
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Evaluation criterion
B
Surge current load (surge)
Standards/regulations
EN 61000-4-5
Surge current load (surge)
Comments
Criterion B
Conducted interference
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Evaluation criterion
A
Standards and regulations
Electrical isolation
Basic insulation in accordance with EN 61010
Mounting
Mounting type
DIN rail mounting
Oct 27, 2022, 7:34 AM
Page 4 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Assembly instructions
The DIN rail connector can be used for bridging the supply
voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position
any
Oct 27, 2022, 7:34 AM
Page 5 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Drawings
Block diagram
IN
Sensor / Field
OUT I
US 4-wire
PWR
max. 18VDC
GND
1
2
OUT
+
–
3
4
2
1
IN I
GND 1
OUT I
active
GND 2
PLC / DCS
5
5
+
6
passive
–
6
7
8
Oct 27, 2022, 7:34 AM
Page 6 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Dimensional drawing
93,1
102,5
6,2
Application drawing
UB
UV = 1,7 V
I
I
UE
I
I
RB
MINI MCR-SL-1CP-I-I
Oct 27, 2022, 7:34 AM
Page 7 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Classifications
ECLASS
ECLASS-9.0
27210120
ECLASS-10.0.1
27210120
ETIM
ETIM 7.0
EC002653
Oct 27, 2022, 7:34 AM
Page 8 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:34 AM
Page 9 (10)
Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP
2864749
https://www.phoenixcontact.com/us/products/2864749
Accessories
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:34 AM
Page 10 (10)
很抱歉,暂时无法提供与“2864749”相匹配的价格&库存,您可以联系我们找货
免费人工找货