2981046

Extension module - PSR-SPP24UC/URM4/5X1/2X2/B 2981046 https://www.phoenixcontact.com/us/products/2981046 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Single or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, width: 22.5 mm, pluggable Push-in terminal block Your advantages • 1- and 2-channel control • Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 Commercial Data Item number 2981046 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C18 Product Key DNA152 Catalog Page Page 232 (C-6-2019) GTIN 4017918915520 Weight per Piece (including packing) 207.4 g Weight per Piece (excluding packing) 20.4 g Customs tariff number 85371098 Country of origin DE Oct 27, 2022, 5:11 PM Page 1 (9) Extension module - PSR-SPP24UC/URM4/5X1/2X2/B 2981046 https://www.phoenixcontact.com/us/products/2981046 Technical Data Product properties Product type Safety relays Application Extension module Mechanical service life 10x 106 cycles Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 Insulation characteristics Overvoltage category III Electrical properties Maximum power dissipation for nominal condition 2.21 W Nominal operating mode 100% operating factor Rated insulation voltage 250 V AC Rated surge voltage/insulation Basic insulation 4 kV: between all current paths and housing Safe isolation, reinforced insulation 6 kV: between A1/A2, 11/12, 23/24, 71/72 and 33/34, 43/44, 53/54, 63/64 Input data General Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 % Power consumption at US typ. 1.94 W (AC) typ. 1.7 W (DC) Rated control supply current IS typ. 81 mA AC typ. 71 mA DC Inrush current 175 mA (Δt = 5 ms at Us) Filter time 2 ms (at A1 in the event of voltage dips at Us) Typ. starting time with Us < 20 ms (when controlled via A1) Typical release time < 20 ms (when controlled via A1) Recovery time