3047465

https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Feed-through terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features  Compact design   Key commercial data Packing unit 11 Minimum order quantity 50 1 Weight per Piece (excluding packing) 13.66 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Maximum load current 28 A Rated surge voltage 6 kV Pollution degree 3 Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 32 A 31.10.2013   Page 1 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Technical data General Nominal voltage UN 500 V Open side panel ja Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 7.3 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Result of bending test Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Tensile test result Test passed Tight fit on carrier NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop ≤ 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.5 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.15 kA Conductor cross section short circuit testing 4 mm² Short-time current 1.25 kA Short circuit stability result Test passed 31.10.2013   Page 2 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Technical data General Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 11.83 (m/s ) /Hz Acceleration 4.25 g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30 g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C 2 2 Dimensions Width 6.2 mm Length 66 mm Height NS 35/7,5 47.7 mm Height NS 35/15 55.2 mm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 10 Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 6 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 10 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² 31.10.2013   Page 3 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Technical data Connection data Conductor cross section stranded, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection method Screw connection Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 31.10.2013   Page 4 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Classifications UNSPSC UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized    B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 300 V 300 V 600 V   B C D mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 300 V 300 V 600 V cUL Recognized  31.10.2013   Page 5 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Approvals CSA      B C mm²/AWG/kcmil 26-10 26-10 26-10 Nominal current IN 25 A 25 A 5A Nominal voltage UN 600 V 600 V 600 V D cULus Recognized  Accessories Accessories Bridge Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, Number of positions: 20, Color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, Number of positions: 10, Color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, Number of positions: 5, Color: red     31.10.2013   Page 6 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, Number of positions: 4, Color: red     Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBS 50-6 - 3032224 Plug-in bridge, Number of positions: 50, Color: red     Switching jumper - SB-ME 2-6 - 3035755 Switching jumper, Length: 21.2 mm, Width: 12.3 mm, Number of positions: 2, Color: gray/orange     31.10.2013   Page 7 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Switching jumper - SB-ME 3-6 - 3035756 Switching jumper, Length: 21.2 mm, Width: 18.5 mm, Number of positions: 3, Color: gray/orange     Switching jumper - SB-ME 4-6 - 3035757 Switching jumper, Length: 21.2 mm, Width: 24.7 mm, Number of positions: 4, Color: gray/orange     Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, Number of positions: 2, Color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, Number of positions: 3, Color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, Number of positions: 4, Color: red     31.10.2013   Page 8 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, Number of positions: 5, Color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, Number of positions: 10, Color: red     Cover profile Cover profile - AP-ME METER - 3034361 Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m     Cover profile - APH-ME - 3034374 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     Cover profile - APT-ME - 3034358 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     31.10.2013   Page 9 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D-UTME 4 - 3047491 Cover, width: 2.2 mm     Spacer plate - DP PS-6 - 3036738 Spacer plate, Color: red     31.10.2013   Page 10 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     31.10.2013   Page 11 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     31.10.2013   Page 12 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     Marker for terminal blocks - TMT 6 R CUS - 0824488 Marker for terminal blocks, Can be ordered: By line, white, Labeled according to customer specifications, Mounting type: Snap into universal marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6.35 x 6.15 mm     Marker carriers Group marker label for terminal marking - GBS-ZB/26X6 - 0809298 Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm     31.10.2013   Page 13 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Marker carriers - CARRIER-TM 300 - 0828282 Marker carriers, gray, Unlabeled, Mounting type: Snap into flat marker groove, Lettering field: 10.5 x 300 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     31.10.2013   Page 14 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     31.10.2013   Page 15 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     31.10.2013   Page 16 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Screwdriver tools 31.10.2013   Page 17 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Group marker label for terminal marking - GBS 5-25X12 - 0810588 Group marker label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with a 25 x 12 mm label or manually with the B-STIFT, in the foot part with ZB 5     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     31.10.2013   Page 18 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     Marker for terminal blocks - TMT 6 R - 0816498 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6.35 x 6.15 mm     Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field: 9.5 x 50000 mm     Test plug terminal block 31.10.2013   Page 19 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Test plugs - MPS-MT - 0201744 Test plugs, Color: silver     Test adapter - PAI-4-FIX-5/6 BU - 3035975 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Blue     Test adapter - PAI-4-FIX-5/6 OG - 3035974 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Orange     Test adapter - PAI-4-FIX-5/6 YE - 3035977 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Yellow     Test adapter - PAI-4-FIX-5/6 RD - 3035976 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Red     31.10.2013   Page 20 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Test adapter - PAI-4-FIX-5/6 GN - 3035978 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Green     Test adapter - PAI-4-FIX-5/6 BK - 3035980 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Black     Test adapter - PAI-4-FIX-5/6 GY - 3035982 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Gray     Test adapter - PAI-4-FIX-5/6 VT - 3035979 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Violet     Test adapter - PAI-4-FIX-5/6 BN - 3035981 Test adapter, for 4 mm Ø safety test plugs, latches into the bridge shaft; color: Brown     31.10.2013   Page 21 / 22 https://www.phoenixcontact.com/us/products/3047465 Feed-through terminal block - UTMED 4 - 3047465 Accessories Test adapter - PS-6 - 3030996 Test adapter, Color: red     Test plugs - PS-6/2,3MM RD - 3038736 Test plugs, Color: red     Drawings Circuit diagram © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 31.10.2013   Page 22 / 22