3214362

https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Multi-level terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, Width: 6.2 mm, Height: 60.1 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK Weight per Piece (excluding packing) 27.600 g Custom tariff number 85369010 Country of origin Poland Technical data Environmental Product Compliance China RoHS Hazardous substances above threshold values; Environmentally Friendly Use Period = 50; For details go to tab “Downloads”, Category “Manufacturer's declaration” General Number of levels 3 Number of connections 4 Potentials 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 09/01/2016   Page 1 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Technical data General Overvoltage category III Insulating material group I Maximum load current 36 A (with 6 mm² conductor cross section) Nominal current IN 30 A Nominal voltage UN 500 V Maximum load current 36 A (with 6 mm² conductor connection) Nominal current IN 30 A (with 4 mm² conductor cross section) Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed 09/01/2016   Page 2 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Technical data General Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.964 (m/s ) /Hz Acceleration 0.58 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 6.2 mm Length 92.7 mm Height 60.1 mm Height NS 35/7,5 61.7 mm Height NS 35/15 69.2 mm Connection data Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² 09/01/2016   Page 3 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Technical data Connection data Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² 09/01/2016   Page 4 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Technical data Connection data Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.14 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Stripping length 9 mm Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V0 Drawings Circuit diagram Classifications eCl@ss eCl@ss 5.1 27141126 eCl@ss 6.0 27141141 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 09/01/2016   Page 5 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Classifications ETIM ETIM 5.0 EC000897 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / cULus Recognized Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A Nominal voltage UN 300 V 300 V cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A Nominal voltage UN 300 V 300 V CSA   http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 16 A 16 A Nominal voltage UN 300 V 300 V 09/01/2016   Page 6 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Approvals cULus Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Accessories Accessories Bridge Connection pin - VS - 3004207 Connection pin, Length: 1000 mm, Color: gray     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     09/01/2016   Page 7 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     09/01/2016   Page 8 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     09/01/2016   Page 9 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     09/01/2016   Page 10 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 10.7 mm, Number of positions: 2, Color: red     09/01/2016   Page 11 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Plug-in bridge - FBS 3-6 - 3030242 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 16.9 mm, Number of positions: 3, Color: red     Plug-in bridge - FBS 4-6 - 3030255 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 23.1 mm, Number of positions: 4, Color: red     Plug-in bridge - FBS 5-6 - 3030349 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 29.3 mm, Number of positions: 5, Color: red     Plug-in bridge - FBS 10-6 - 3030271 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 60.3 mm, Number of positions: 10, Color: red     Plug-in bridge - FBS 20-6 - 3030365 Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 122.3 mm, Number of positions: 20, Color: red     09/01/2016   Page 12 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Plug-in bridge - FBSR 2-6 - 3033715 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red     Plug-in bridge - FBSR 3-6 - 3001594 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 3, Color: red     Plug-in bridge - FBSR 4-6 - 3001595 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 4, Color: red     Plug-in bridge - FBSR 5-6 - 3001596 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 5, Color: red     Plug-in bridge - FBSR 10-6 - 3033716 Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red     Labeled terminal marker 09/01/2016   Page 13 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     09/01/2016   Page 14 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     09/01/2016   Page 15 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND, U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker pen 09/01/2016   Page 16 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.4 x 4.7 mm     09/01/2016   Page 17 / 18 https://www.phoenixcontact.com/us/products/3214362 Multi-level terminal block - UT 4-L/L - 3214362 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Test socket Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/01/2016   Page 18 / 18