PCS05L380ZT

Printed Circuit Board Solid State Relay FEATURES 5 amp rating @ 30 degrees C Industry standard footprint 4000 volt dielectric strength Will switch up to 440 volts Built in snubbers Back to back SCR or Triac output Solid epoxy encapsulation PCS05 Pending INPUT PARAMETERS Input Input Voltage Must Operate Voltage Must Release Voltage Typical Input Current Low Range (L) 3 VDC to 15 VDC Max 3 VDC Min 1.0 VDC 15 mA DC High Range (H) 15 VDC to 32 VDC Max 15 VDC Min 1.0 VDC 15 mA DC GENERAL PARAMETERS Dielectric strength (input to output) Insulation Resistance Vibration Resistance Ambient operating temperature Ambient storage temperature Ambient humidity Weight 48 to 264 VAC for 240 VAC rated relay 48 to 440 VAC for 380 VAC rated relay 0.1 Amps to 5 Amps 250 Amps Peak 1.5 milliamps 1.5 Volts 4000 Vrms 1000 megohms @ 500VDC DA 1.5 mm 10 to 50 Hz -30 to +80 degrees C -30 to +100 degrees C 45% to 85% 15 grams max OUTPUT PARAMETERS Load Voltage Range Load Current Range Max Surge current (10 ms) Max off-state leakage current Max on-state voltage drop Maximum Turn-on Time 6 5 4 3 2 1 Maximum Load Current vs. Ambient Temperature Zero Crossing 10 milliseconds Random 1 millisecond 10 milliseconds 600 V for 240 VAC and 800 V for 380 VAC 200V / micro second 0.5 Maximum turn-off time Transient overvoltage Minimum off-state dv/dt Minimum power factor Maximum Load Current Amps ORDERING INFORMATION Example: Model DC Input Range L: 3 VDC to 15 VDC, H: 15 VDC to 32 VDC Load Voltage 240 or 380 Type of Operation Z: Zero cross turn on; R: Random turn on Output Type S: SCR, T: Triac PCS05 L 240 Z T 0 -30 0 10 20 30 40 50 60 70 80 100 Ambient Temperature (degrees C) Description The PCS05 relay is pin for pin compatible with standard OAC type I/O modules. The PCS05 is available with random turn-on as an alternate to zero-cross turn-on. The PCS05 SSR offers a choice of 240VAC or 380VAC versions and input ranges of 3 to 15 vDC and 15 to 32 VDC. All Models include an internal snubber. 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com PCS05 Rev A 4-28-05 PAGE 1 PCS05 PCS05 Dimensions in Inches (millimeters) .275 (7.0) 1.70 (43.1) 1.00 (25.4) INPUT -4 +3 .300 (7.6) .040 (1.0) .200 (5.1) .700 (17.8) LOAD 2 1 .100 (2.5) 1.100 (27.9) PRECAUTIONS 1. Soldering must be completed within 10 seconds at 260 degrees C or less or within 5 seconds at 350 degrees C. 2. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, reduce the load current. 3. The input circuitry does not incorporate a circuit protecting the SSR from a reversed polarity connection. Confirm that the polarity is correct when connecting the input. Notes: Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com PAGE 2