4911A-48-2

Model 4911A Retractable Sheath Banana Plug Patch Cord Retractable Sheath Insulated Tip FEATURES: Retractable sheath end allows interfacing to either standard sheathed or non-sheath style banana 1.66” (4mm) jacks. Plug and housing are molded directly to the cable in an integral one piece design and the wire is double crimped for a long lasting connection. Multi-leaf banana spring material is Beryllium Copper, nickel plated for extended insertion life cycle and low contact resistance. Test leads can mate to a broad assortment of Pomona probes, alligators, spade lugs, etc. MATERIALS: Retractable Sheath Banana Plug: Banana Plug Body: Nickel Plated Brass Banana Spring: Nickel Plated Beryllium Copper Compression Spring: Stainless Steel Tip: Polypropylene, Color Matches Color of Wire Insulation: Polypropylene, Molded to the Plug and Wire. Color Matches Color of Wire. Wire: 18 AWG, Stranding 65 x 36 t.c., PVC Insulated, .144 (3,66mm) O.D. RATINGS: Operating Voltage: 1000 Vrms IEC 1010-2-31, Category III Current: 10 Amperes Operating Temperature: +131° F (+55° C) Max. ORDERING INFORMATION: Model 4911A-*Length-Color Length = Standard Lengths are: 12” (30,48cm), 24” (60,96cm), 36” (91,44cm), 48” (121,92cm), & 60” (152,4cm). Additional lengths can be quoted upon request. Color = -0 (Black), -2 (Red) Ordering Example: 4911A-12-2 (Patch Cord is 12” (30,48cm), Color is Red) USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D1094276 Rev 102 Copyright © 2007 11/25/2007 Page 1 of Where to Buy: www.pomonaelectronics.com 2 Model 4911A Retractable Sheath Banana Plug Patch Cord USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D1094276 Rev 102 Copyright © 2007 11/25/2007 Page 2 of Where to Buy: www.pomonaelectronics.com 2