ARF671S45

POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. +39 010 6556234 - Fax +39 010 6557519 Sales Office: Tel. +39 010 6556775 - Fax +39 010 6442510 FAST RECOVERY DIODE FOR IGBT,IEGT,GCT APPLICATIONS SNUBBERLESS OPERATION LOW LOSSES SOFT RECOVERY TARGET SPECIFICATION giu 00 - ISSUE : 02 ARF671 Repetitive voltage up to Mean forward current Surge current 4500 V 790 A 15 kA Symbol Characteristic Conditions Tj [°C] Value Unit BLOCKING V V I V RRM RSM RRM DC LINK Repetitive peak reverse voltage Non-repetitive peak reverse voltage Repetitive peak reverse current Permanent DC voltage V=VRRM 125 125 125 125 4500 4600 80 2800 V V mA V CONDUCTING I I I F (AV) F (AV) FSM Mean forward current Mean forward current Surge forward current I² t Forward voltage Threshold voltage Forward slope resistance 180° sin ,50 Hz, Th=55°C, double side cooled 180° square,50 Hz,Th=55°C,double side cooled Sine wave, 10 ms reapplied reverse voltage up to 50% VRSM Forward current = =2500 A 125 790 820 15 1125 x1E3 125 125 125 4.65 1.90 1.100 A A kA A²s V V mohm I² t V V r FM F(TO) F SWITCHING Q rr I rr t rr Q rr I rr s E V OFF FR Reverse recovery charge Peak reverse recovery current Reverse recovery time Reverse recovery charge Peak reverse recovery current Softness (s-factor), min Turn off energy dissipation Peak forward recovery IF= VR = IF= di/dt= VR = 1000 A 100 V 2100 A 1000 A/µs 1800 V di/dt= 250 A/µs 125 125 1000 525 µC A µs 2500 125 1400 µC A J di/dt= 400 A/µs 125 V MOUNTING R th(j-h) R th(c-h) T F j Thermal impedance Thermal impedance Operating junction temperature Mounting force Mass Junction to heatsink, double side cooled Case to heatsink, double side cooled 21 6 -30 / 125 22.0 / 24.5 300 °C/kW °C/kW °C kN g ORDERING INFORMATION : ARF671 S 45 standard specification VRRM/100 ARF671 FAST RECOVERY DIODE TARGET SPECIFICATION giu 00 - ISSUE : 02 POSEICO POSEICO SPA P Ower SEmiconductors Italian COrporation FORWARD CHARACTERISTIC Tj = 125 °C 2500 16 14 2000 12 Forward Current [A] 1500 10 ITSM [kA] 8 6 4 2 0 0.6 1.6 2.6 Forward Voltage [V] 3.6 4.6 0 1 SURGE CHARACTERISTIC Tj = 125 °C 1000 500 10 n° cycles 100 TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 25.0 20.0 Zth j-h [°C/kW] 15.0 10.0 5.0 0.0 0.001 0.01 0.1 t[s] 1 10 100 Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement ANSALDO reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported.